File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Conversion of box-shaped features for manufacturing applications

TitleConversion of box-shaped features for manufacturing applications
Authors
Issue Date1998
PublisherPergamon. The Journal's web site is located at http://www.elsevier.com/locate/cie
Citation
Computers And Industrial Engineering, 1998, v. 34 n. 2-4, p. 501-514 How to Cite?
AbstractThe mapping of design intent to the subsequent downstream application features, such as machining planning, setup planning, engineering analysis, assembly planning, etc., is an important area of research in CIM. Feature technology is recognized to have the potential for automating and integrating design and downstream applications in the CIM environment. Much research effort in features has been contributed in the area of linking design and a downstream application such as manufacturing process planning using either feature recognition or the design by features approaches. However, only a limited number of feature based systems can link up more than one application. This paper describes a prototype feature conversion system for integrating feature based design with multiple downstream applications. In the prototype system, there are two types of features: neutral features and application features. The system is armed with algorithms to convert between neutral features and application features. © 1998 Elsevier Science Ltd. All rights reserved.
Persistent Identifierhttp://hdl.handle.net/10722/74402
ISSN
2023 Impact Factor: 6.7
2023 SCImago Journal Rankings: 1.701
ISI Accession Number ID
References

 

DC FieldValueLanguage
dc.contributor.authorWong, TNen_HK
dc.contributor.authorLeung, CBen_HK
dc.date.accessioned2010-09-06T07:00:58Z-
dc.date.available2010-09-06T07:00:58Z-
dc.date.issued1998en_HK
dc.identifier.citationComputers And Industrial Engineering, 1998, v. 34 n. 2-4, p. 501-514en_HK
dc.identifier.issn0360-8352en_HK
dc.identifier.urihttp://hdl.handle.net/10722/74402-
dc.description.abstractThe mapping of design intent to the subsequent downstream application features, such as machining planning, setup planning, engineering analysis, assembly planning, etc., is an important area of research in CIM. Feature technology is recognized to have the potential for automating and integrating design and downstream applications in the CIM environment. Much research effort in features has been contributed in the area of linking design and a downstream application such as manufacturing process planning using either feature recognition or the design by features approaches. However, only a limited number of feature based systems can link up more than one application. This paper describes a prototype feature conversion system for integrating feature based design with multiple downstream applications. In the prototype system, there are two types of features: neutral features and application features. The system is armed with algorithms to convert between neutral features and application features. © 1998 Elsevier Science Ltd. All rights reserved.en_HK
dc.languageengen_HK
dc.publisherPergamon. The Journal's web site is located at http://www.elsevier.com/locate/cieen_HK
dc.relation.ispartofComputers and Industrial Engineeringen_HK
dc.titleConversion of box-shaped features for manufacturing applicationsen_HK
dc.typeArticleen_HK
dc.identifier.openurlhttp://library.hku.hk:4550/resserv?sid=HKU:IR&issn=0360-8352&volume=34&issue=2&spage=501&epage=514&date=1998&atitle=Conversion+of+box-shaped+features+for+manufacturing+applicationsen_HK
dc.identifier.emailWong, TN: tnwong@hku.hken_HK
dc.identifier.authorityWong, TN=rp00192en_HK
dc.description.naturelink_to_subscribed_fulltext-
dc.identifier.scopuseid_2-s2.0-0032045101en_HK
dc.identifier.hkuros37793en_HK
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-0032045101&selection=ref&src=s&origin=recordpageen_HK
dc.identifier.volume34en_HK
dc.identifier.issue2-4en_HK
dc.identifier.spage501en_HK
dc.identifier.epage514en_HK
dc.identifier.isiWOS:000073473700019-
dc.publisher.placeUnited Kingdomen_HK
dc.identifier.scopusauthoridWong, TN=55301015400en_HK
dc.identifier.scopusauthoridLeung, CB=24784135000en_HK
dc.identifier.issnl0360-8352-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats