File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Tests of cold-formed high strength stainless steel compression members

TitleTests of cold-formed high strength stainless steel compression members
Authors
Young, BLui, WM
KeywordsCold-formed steel
Column
Duplex stainless steel
Experimental investigation
High strength
Material properties
Stainless steel structures
Structural design
Tubular sections
Issue Date2006
PublisherPergamon. The Journal's web site is located at http://www.elsevier.com/locate/tws
Citation
Thin-Walled Structures, 2006, v. 44 n. 2, p. 224-234 How to Cite?
DOI: http://dx.doi.org/10.1016/j.tws.2006.01.006
AbstractThe paper describes a test program on cold-formed high strength stainless steel compression members. The duplex stainless steel having the yield stress and tensile strength up to 750 and 850 MPa, respectively, was investigated. The material properties of the test specimens were obtained from tensile coupon and stub column tests. The test specimens were cold-rolled into square and rectangular hollow sections. The specimens were compressed between fixed ends at different column lengths. The initial overall geometric imperfections of the column specimens were measured. The strength and behaviour of cold-formed high strength stainless steel columns were investigated. The test strengths were compared with the design strengths predicted using the American, Australian/New Zealand and European specifications for cold-formed stainless steel structures. Generally, it is shown that the design strengths predicted by the three specifications are conservative for the cold-formed high strength stainless steel columns. In addition, reliability analysis was performed to evaluate the current design rules. © 2006 Elsevier Ltd. All rights reserved.
Persistent Identifierhttp://hdl.handle.net/10722/71060
ISSN
0263-8231
2023 Impact Factor: 5.7
2023 SCImago Journal Rankings: 1.527
ISI Accession Number ID
WOS:000237753200010
References
References in Scopus

 

DC FieldValueLanguage
dc.contributor.authorYoung, Ben_HK
dc.contributor.authorLui, WMen_HK
dc.date.accessioned2010-09-06T06:28:33Z-
dc.date.available2010-09-06T06:28:33Z-
dc.date.issued2006en_HK
dc.identifier.citationThin-Walled Structures, 2006, v. 44 n. 2, p. 224-234en_HK
dc.identifier.issn0263-8231en_HK
dc.identifier.urihttp://hdl.handle.net/10722/71060-
dc.description.abstractThe paper describes a test program on cold-formed high strength stainless steel compression members. The duplex stainless steel having the yield stress and tensile strength up to 750 and 850 MPa, respectively, was investigated. The material properties of the test specimens were obtained from tensile coupon and stub column tests. The test specimens were cold-rolled into square and rectangular hollow sections. The specimens were compressed between fixed ends at different column lengths. The initial overall geometric imperfections of the column specimens were measured. The strength and behaviour of cold-formed high strength stainless steel columns were investigated. The test strengths were compared with the design strengths predicted using the American, Australian/New Zealand and European specifications for cold-formed stainless steel structures. Generally, it is shown that the design strengths predicted by the three specifications are conservative for the cold-formed high strength stainless steel columns. In addition, reliability analysis was performed to evaluate the current design rules. © 2006 Elsevier Ltd. All rights reserved.en_HK
dc.languageengen_HK
dc.publisherPergamon. The Journal's web site is located at http://www.elsevier.com/locate/twsen_HK
dc.relation.ispartofThin-Walled Structuresen_HK
dc.subjectCold-formed steelen_HK
dc.subjectColumnen_HK
dc.subjectDuplex stainless steelen_HK
dc.subjectExperimental investigationen_HK
dc.subjectHigh strengthen_HK
dc.subjectMaterial propertiesen_HK
dc.subjectStainless steel structuresen_HK
dc.subjectStructural designen_HK
dc.subjectTubular sectionsen_HK
dc.titleTests of cold-formed high strength stainless steel compression membersen_HK
dc.typeArticleen_HK
dc.identifier.openurlhttp://library.hku.hk:4550/resserv?sid=HKU:IR&issn=0263-8231&volume=44&spage=224&epage=234&date=2006&atitle=Tests+of+Cold-formed+High+Strength+Stainless+Steel+Compression+Membersen_HK
dc.identifier.emailYoung, B:young@hku.hken_HK
dc.identifier.authorityYoung, B=rp00208en_HK
dc.description.naturelink_to_subscribed_fulltext-
dc.identifier.doi10.1016/j.tws.2006.01.006en_HK
dc.identifier.scopuseid_2-s2.0-33646122878en_HK
dc.identifier.hkuros118226en_HK
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-33646122878&selection=ref&src=s&origin=recordpageen_HK
dc.identifier.volume44en_HK
dc.identifier.issue2en_HK
dc.identifier.spage224en_HK
dc.identifier.epage234en_HK
dc.identifier.isiWOS:000237753200010-
dc.publisher.placeUnited Kingdomen_HK
dc.identifier.scopusauthoridYoung, B=7402192398en_HK
dc.identifier.scopusauthoridLui, WM=9250011500en_HK
dc.identifier.issnl0263-8231-

Export via OAI-PMH Interface in XML Formats

OR

Export to Other Non-XML Formats