File Download
  Links for fulltext
     (May Require Subscription)
Supplementary

Conference Paper: A sensor for parts inspection

TitleA sensor for parts inspection
Authors
Tam, SMCheung, KC
Issue Date1996
PublisherIEEE. The Journal's web site is located at http://ieeexplore.ieee.org/xpl/conhome.jsp?punumber=1000352
Citation
Proceedings of the 22nd IEEE International Conference on Industrial Electronics, Control, and Instrumentation (IECON’96), Taipei, Taiwan, 5-10 August 1996, v. 3, p. 1453-1458 How to Cite?
DOI: http://dx.doi.org/10.1109/IECON.1996.570597
AbstractThis paper describes the development of a sensor which performs parts inspection by measuring the inertial properties of the part. The sensor comprises a platform supported on a column which is fixed to a rigid base. The part under inspection is attached to the platform to form a single body. By measuring the static deflections of the column and the natural vibration frequencies of the system, it is possible to determine the mass and the spatial location of the centre of mass of the part. The information obtained is then used to distinguish defective parts from good ones.
Persistent Identifierhttp://hdl.handle.net/10722/46632
ISBN
0-7803-2775-6
References
References in Scopus

 

DC FieldValueLanguage
dc.contributor.authorTam, SMen_HK
dc.contributor.authorCheung, KCen_HK
dc.date.accessioned2007-10-30T06:54:40Z-
dc.date.available2007-10-30T06:54:40Z-
dc.date.issued1996en_HK
dc.identifier.citationProceedings of the 22nd IEEE International Conference on Industrial Electronics, Control, and Instrumentation (IECON’96), Taipei, Taiwan, 5-10 August 1996, v. 3, p. 1453-1458en_HK
dc.identifier.isbn0-7803-2775-6en_HK
dc.identifier.urihttp://hdl.handle.net/10722/46632-
dc.description.abstractThis paper describes the development of a sensor which performs parts inspection by measuring the inertial properties of the part. The sensor comprises a platform supported on a column which is fixed to a rigid base. The part under inspection is attached to the platform to form a single body. By measuring the static deflections of the column and the natural vibration frequencies of the system, it is possible to determine the mass and the spatial location of the centre of mass of the part. The information obtained is then used to distinguish defective parts from good ones.en_HK
dc.languageengen_HK
dc.publisherIEEE. The Journal's web site is located at http://ieeexplore.ieee.org/xpl/conhome.jsp?punumber=1000352en_HK
dc.relation.ispartofIECON Proceedings-
dc.rights©1996 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.-
dc.titleA sensor for parts inspectionen_HK
dc.typeConference_Paperen_HK
dc.identifier.emailCheung, KC:kccheung@hkucc.hku.hk-
dc.identifier.authorityCheung, KC=rp01322-
dc.description.naturepublished_or_final_versionen_HK
dc.identifier.doi10.1109/IECON.1996.570597-
dc.identifier.scopuseid_2-s2.0-0030392952-
dc.identifier.hkuros26400-
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-0030392952&selection=ref&src=s&origin=recordpage-
dc.identifier.volume3-
dc.identifier.spage1453-
dc.identifier.epage1458-
dc.identifier.scopusauthoridTam, SM=7202037309-
dc.identifier.scopusauthoridCheung, KC=7402406698-
dc.customcontrol.immutablesml 151028 - merged-

Export via OAI-PMH Interface in XML Formats

OR

Export to Other Non-XML Formats