File Download
  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Point Defect Scattering and Phonon Softening for Achieving High Thermoelectric Performance in p-Type ZnSb with Optimal Carrier Concentration

TitlePoint Defect Scattering and Phonon Softening for Achieving High Thermoelectric Performance in p-Type ZnSb with Optimal Carrier Concentration
Authors
Keywordscarrier concentration optimization
phonon softening
point defect scattering
thermoelectrics
zinc antimonide
Issue Date10-Mar-2025
PublisherAmerican Chemical Society
Citation
ACS Applied Materials & Interfaces, 2025, v. 17, n. 11, p. 17036-17044 How to Cite?
Abstract

The thermoelectric material ZnSb has been intensively studied on account of its good thermodynamic stability and earth-abundant constituent elements, both of which make it feasible for mass production. However, the practical application of ZnSb is limited by its relatively poor thermoelectric performance, characterized by a low power factor and high lattice thermal conductivity. Herein, we demonstrate that there is a significant improvement in the thermoelectric figure of merit of ZnSb by combining Ge doping at the Sb site with Cd alloying at the Zn site. First, Ge doping at the Sb site can effectively optimize the carrier concentration, thereby resulting in an ∼82% increase in the peak power factor through a concentration of only 0.6%. Second, Cd alloying at the Zn site can bring about a strong point defect scattering to phonon propagation, leading to reduced phonon relaxation time. Meanwhile, the significant softening of acoustic phonons is also introduced by Cd alloying at the Zn site, and thus group velocities of acoustic phonon modes are suppressed. Consequently, a ∼44% reduction in the lattice thermal conductivity is achieved in Zn0.7Cd0.3Sb at room temperature. As a result of the optimized carrier concentration and suppressed lattice thermal conductivity, a peak zT value as high as ∼1.08 at 564 K is attained in Zn0.7Cd0.3Sb0.96Ge0.04.


Persistent Identifierhttp://hdl.handle.net/10722/357874
ISSN
2023 Impact Factor: 8.3
2023 SCImago Journal Rankings: 2.058
ISI Accession Number ID

 

DC FieldValueLanguage
dc.contributor.authorShen, Dongyi-
dc.contributor.authorTai, Siu Ting-
dc.contributor.authorLiu, Kejia-
dc.contributor.authorWang, Wenxuan-
dc.contributor.authorLi, Haiqi-
dc.contributor.authorVaskuri, C S Theja-
dc.contributor.authorChen, Chen-
dc.contributor.authorChen, Yue-
dc.date.accessioned2025-07-22T03:15:29Z-
dc.date.available2025-07-22T03:15:29Z-
dc.date.issued2025-03-10-
dc.identifier.citationACS Applied Materials & Interfaces, 2025, v. 17, n. 11, p. 17036-17044-
dc.identifier.issn1944-8244-
dc.identifier.urihttp://hdl.handle.net/10722/357874-
dc.description.abstract<p>The thermoelectric material ZnSb has been intensively studied on account of its good thermodynamic stability and earth-abundant constituent elements, both of which make it feasible for mass production. However, the practical application of ZnSb is limited by its relatively poor thermoelectric performance, characterized by a low power factor and high lattice thermal conductivity. Herein, we demonstrate that there is a significant improvement in the thermoelectric figure of merit of ZnSb by combining Ge doping at the Sb site with Cd alloying at the Zn site. First, Ge doping at the Sb site can effectively optimize the carrier concentration, thereby resulting in an ∼82% increase in the peak power factor through a concentration of only 0.6%. Second, Cd alloying at the Zn site can bring about a strong point defect scattering to phonon propagation, leading to reduced phonon relaxation time. Meanwhile, the significant softening of acoustic phonons is also introduced by Cd alloying at the Zn site, and thus group velocities of acoustic phonon modes are suppressed. Consequently, a ∼44% reduction in the lattice thermal conductivity is achieved in Zn<sub>0.7</sub>Cd<sub>0.3</sub>Sb at room temperature. As a result of the optimized carrier concentration and suppressed lattice thermal conductivity, a peak <em>zT</em> value as high as ∼1.08 at 564 K is attained in Zn<sub>0.7</sub>Cd<sub>0.3</sub>Sb<sub>0.96</sub>Ge<sub>0.04</sub>.<br></p>-
dc.languageeng-
dc.publisherAmerican Chemical Society-
dc.relation.ispartofACS Applied Materials & Interfaces-
dc.rightsThis work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.-
dc.subjectcarrier concentration optimization-
dc.subjectphonon softening-
dc.subjectpoint defect scattering-
dc.subjectthermoelectrics-
dc.subjectzinc antimonide-
dc.titlePoint Defect Scattering and Phonon Softening for Achieving High Thermoelectric Performance in p-Type ZnSb with Optimal Carrier Concentration-
dc.typeArticle-
dc.description.naturepublished_or_final_version-
dc.identifier.doi10.1021/acsami.4c21670-
dc.identifier.scopuseid_2-s2.0-105001059031-
dc.identifier.volume17-
dc.identifier.issue11-
dc.identifier.spage17036-
dc.identifier.epage17044-
dc.identifier.eissn1944-8252-
dc.identifier.isiWOS:001441195900001-
dc.identifier.issnl1944-8244-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats