File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: VIRTUAL IMPINGEMENT TESTS IN 113 PATIENTS UNDERGOING TOTAL HIP ARTHROPLASTY

TitleVIRTUAL IMPINGEMENT TESTS IN 113 PATIENTS UNDERGOING TOTAL HIP ARTHROPLASTY
Authors
Issue Date19-Aug-2024
PublisherBritish Editorial Society of Bone and Joint Surgery
Citation
Orthopaedic Proceedings, 2024, v. 106-B How to Cite?
Abstract

Hip precautions following total hip arthroplasty (THA) limits flexion, adduction and internal rotation, yet these precautions cause unnecessary psychological stress. This study aims to assess bony and implant impingement using virtual models from actual patient's bony morphology and spinopelvic parameters to deduce whether hip precautions are necessary with precise implant positioning in the Asian population.

Individualized sitting and standing sacral slope data of robotic THAs performed at two tertiary referral centers in Hong Kong was inputted into the simulation system based on patients’ pre-operative sitting and standing lumbar spine X-rays. Three-dimensional dynamic models were reconstructed using the Stryker Mako THA 4.0 software to assess bony and implant impingement both anteriorly and posteriorly, with default cup placement at 40° inclination and 20° anteversion. Femoral anteversion followed individual patient's native version. A 36mm hip ball was chosen for all cups equal or above 48mm and 32mm for those below. Anterior impingement was assessed by hip flexion and posterior impingement was assessed by hip extension.

113 patients were included. At neutral rotation and adduction, no patients had anterior implant impingement at hip flexion of 100°. 1.7% had impingement at 110°, 3.5% had impingement at 120°, 9.7% had impingement at 130°. With 20° of internal rotation and adduction, 0.8% had anterior implant impingement at hip flexion of 90°, 7.1% had impingement at 100° and 18.5% had impingement at 110°. With the hip externally rotated by 20°, 0.8% of patients had posterior implant impingement, and 8.8% bony impingement at 0° extension.

With enabling technology allowing accurate component positioning, hip precautions without limiting forward flexion in neutral position is safe given precise implant positioning and adequate osteophyte removal. Patients should only be cautioned about combined internal rotation, adduction with flexion.


Persistent Identifierhttp://hdl.handle.net/10722/356631
ISSN

 

DC FieldValueLanguage
dc.contributor.authorFu, H-
dc.contributor.authorSingh, G-
dc.contributor.authorH, C-
dc.contributor.authorLam, J-
dc.contributor.authorYan, C H-
dc.contributor.authorCheung, A-
dc.contributor.authorChan, P K-
dc.contributor.authorChiu, K Y-
dc.date.accessioned2025-06-06T00:35:08Z-
dc.date.available2025-06-06T00:35:08Z-
dc.date.issued2024-08-19-
dc.identifier.citationOrthopaedic Proceedings, 2024, v. 106-B-
dc.identifier.issn1358-992X-
dc.identifier.urihttp://hdl.handle.net/10722/356631-
dc.description.abstract<p>Hip precautions following total hip arthroplasty (THA) limits flexion, adduction and internal rotation, yet these precautions cause unnecessary psychological stress. This study aims to assess bony and implant impingement using virtual models from actual patient's bony morphology and spinopelvic parameters to deduce whether hip precautions are necessary with precise implant positioning in the Asian population.</p><p>Individualized sitting and standing sacral slope data of robotic THAs performed at two tertiary referral centers in Hong Kong was inputted into the simulation system based on patients’ pre-operative sitting and standing lumbar spine X-rays. Three-dimensional dynamic models were reconstructed using the Stryker Mako THA 4.0 software to assess bony and implant impingement both anteriorly and posteriorly, with default cup placement at 40° inclination and 20° anteversion. Femoral anteversion followed individual patient's native version. A 36mm hip ball was chosen for all cups equal or above 48mm and 32mm for those below. Anterior impingement was assessed by hip flexion and posterior impingement was assessed by hip extension.</p><p>113 patients were included. At neutral rotation and adduction, no patients had anterior implant impingement at hip flexion of 100°. 1.7% had impingement at 110°, 3.5% had impingement at 120°, 9.7% had impingement at 130°. With 20° of internal rotation and adduction, 0.8% had anterior implant impingement at hip flexion of 90°, 7.1% had impingement at 100° and 18.5% had impingement at 110°. With the hip externally rotated by 20°, 0.8% of patients had posterior implant impingement, and 8.8% bony impingement at 0° extension.</p><p>With enabling technology allowing accurate component positioning, hip precautions without limiting forward flexion in neutral position is safe given precise implant positioning and adequate osteophyte removal. Patients should only be cautioned about combined internal rotation, adduction with flexion.</p>-
dc.languageeng-
dc.publisherBritish Editorial Society of Bone and Joint Surgery-
dc.relation.ispartofOrthopaedic Proceedings-
dc.rightsThis work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.-
dc.titleVIRTUAL IMPINGEMENT TESTS IN 113 PATIENTS UNDERGOING TOTAL HIP ARTHROPLASTY-
dc.typeArticle-
dc.identifier.doi10.1302/1358-992x.2024.16.077-
dc.identifier.volume106-B-
dc.identifier.issnl1358-992X-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats