Design approach and its optimization for bolted steel plate strengthened RC beams considering the effect of connection bolt slip

Abstract

<p>The use of bolted steel plates (BSP) has been found to be an effective method for increasing the flexural capacity of reinforced concrete (RC) beams. However, slip in bolt connections is an inevitable occurrence that affects the mechanical behavior of the BSP beam. While prior studies have thoroughly examined the effects of bolt connection slip on the flexural capacity of BSP beams, assuming unlimited slip, experimental results revealed that bolt connection failure takes place when slip surpasses a specific threshold. The current design methodology does not accommodate this finding. To address this issue, a simplified design method for practical applications is proposed. Comprehensive parameter studies were conducted on the enhanced moment capacity ratio and maximum bolt slip, involving a total of 13,824 and 276,480 calculations, respectively. It is found that several parameters (e.g., the aspect ratio of RC beam, the tensile longitudinal reinforcement ratio, the height of steel plate) affect the two above-mentioned indexes. Equations were then developed to determine the enhanced moment capacity ratio and maximum slip. It is noteworthy that the recommended effective yield slip (0.55 mm) is obtained based on adhesive anchor, which should be checked when other types of anchors would be used. Relying on these equations, an <a href="https://www.sciencedirect.com/topics/engineering/optimised-design" title="Learn more about optimized design from ScienceDirect's AI-generated Topic Pages">optimized design</a> approach for BSP beams is introduced that avoids complex iterative processes. The effectiveness of the optimized design methodology is substantiated through a practical example.<br></p>