File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Enhancement in the electromagnetic shielding properties of doped M0.01Fe2.99O4 magnetite nanoparticles (M = Mn2+, Ni2+, Cu2+, Zn2+)

TitleEnhancement in the electromagnetic shielding properties of doped M0.01Fe2.99O4 magnetite nanoparticles (M = Mn2+, Ni2+, Cu2+, Zn2+)
Authors
KeywordsAbsorbers
Co-precipitation
Electromagnetic properties
Ferrites
Nanoparticles
Issue Date15-Oct-2023
PublisherElsevier
Citation
Journal of Alloys and Compounds, 2023, v. 960, p. 1-11 How to Cite?
Abstract

Fe3O4 nanoparticles (NPs) are one of the most investigated materials in the field of microwave absorbers. To further optimize the electromagnetic interference (EMI) shielding effectiveness, doped M0 .01Fe2.99O4 (M = Mn, Ni, Cu, Zn) NPs were synthesized through co-precipitation method. All samples were subjected to X-ray diffraction analysis to determine their crystal structure. Transmission electron microscopy, energy dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy were performed to confirm the morphologies, distribution of elements, and valence of iron in the prepared nanoparticles, respectively. The dielectric and magnetic characteristics displayed a considerable improvement for the doped Fe3O4 samples, except Zn0.01Fe2.99O4 where the obtained values were found to be comparable to those of pure Fe3O4. These variations are described in terms of the homogeneously distributed microstructure, mixed spinel cationic distribution in the doped samples, and Fe+/Fe 2 3ratios at the octahedral interstitial + sites. Moreover, the EMI shielding efficiency was measured in the X-band frequency range (8.2 - 12.4 GHz) using a wave guide approach. The total shielding effectiveness of Cu0.01Fe2.99O4 and Ni0.01Fe2.99O4 samples was found to be much higher than that of pure Fe3O4 with absorption being the dominant mechanism. This is most likely owing to their high dielectric permittivity, enhanced conductivity, and high magnetic permeability, which results in improved impedance matching and stronger microwave absorption. This suggests that these doped nanoparticles may be utilized as efficient electromagnetic absorbers.


Persistent Identifierhttp://hdl.handle.net/10722/337996
ISSN
2023 Impact Factor: 5.8
2023 SCImago Journal Rankings: 1.103
ISI Accession Number ID

 

DC FieldValueLanguage
dc.contributor.authorRehman, AU-
dc.contributor.authorAtif, M-
dc.contributor.authorBaqi, S-
dc.contributor.authorUl-Hamid, A-
dc.contributor.authorRehman, UU-
dc.contributor.authorKhalid, W-
dc.contributor.authorAli, Z-
dc.contributor.authorLing, FCC-
dc.contributor.authorNadeem, M-
dc.date.accessioned2024-03-11T10:25:29Z-
dc.date.available2024-03-11T10:25:29Z-
dc.date.issued2023-10-15-
dc.identifier.citationJournal of Alloys and Compounds, 2023, v. 960, p. 1-11-
dc.identifier.issn0925-8388-
dc.identifier.urihttp://hdl.handle.net/10722/337996-
dc.description.abstract<p>Fe3O4 nanoparticles (NPs) are one of the most investigated materials in the field of microwave absorbers. To further optimize the electromagnetic interference (EMI) shielding effectiveness, doped M0 .01Fe2.99O4 (M = Mn, Ni, Cu, Zn) NPs were synthesized through co-precipitation method. All samples were subjected to X-ray diffraction analysis to determine their crystal structure. Transmission electron microscopy, energy dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy were performed to confirm the morphologies, distribution of elements, and valence of iron in the prepared nanoparticles, respectively. The dielectric and magnetic characteristics displayed a considerable improvement for the doped Fe3O4 samples, except Zn0.01Fe2.99O4 where the obtained values were found to be comparable to those of pure Fe3O4. These variations are described in terms of the homogeneously distributed microstructure, mixed spinel cationic distribution in the doped samples, and Fe+/Fe 2 3ratios at the octahedral interstitial + sites. Moreover, the EMI shielding efficiency was measured in the X-band frequency range (8.2 - 12.4 GHz) using a wave guide approach. The total shielding effectiveness of Cu0.01Fe2.99O4 and Ni0.01Fe2.99O4 samples was found to be much higher than that of pure Fe3O4 with absorption being the dominant mechanism. This is most likely owing to their high dielectric permittivity, enhanced conductivity, and high magnetic permeability, which results in improved impedance matching and stronger microwave absorption. This suggests that these doped nanoparticles may be utilized as efficient electromagnetic absorbers.</p>-
dc.languageeng-
dc.publisherElsevier-
dc.relation.ispartofJournal of Alloys and Compounds-
dc.subjectAbsorbers-
dc.subjectCo-precipitation-
dc.subjectElectromagnetic properties-
dc.subjectFerrites-
dc.subjectNanoparticles-
dc.titleEnhancement in the electromagnetic shielding properties of doped M0.01Fe2.99O4 magnetite nanoparticles (M = Mn2+, Ni2+, Cu2+, Zn2+)-
dc.typeArticle-
dc.identifier.doi10.1016/j.jallcom.2023.171051-
dc.identifier.scopuseid_2-s2.0-85162990900-
dc.identifier.volume960-
dc.identifier.spage1-
dc.identifier.epage11-
dc.identifier.eissn1873-4669-
dc.identifier.isiWOS:001055745200001-
dc.publisher.placeLAUSANNE-
dc.identifier.issnl0925-8388-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats