File Download
  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Effect of the hole transport layer on the performance of sky-blue Dion-Jacobson perovskite light-emitting diodes

TitleEffect of the hole transport layer on the performance of sky-blue Dion-Jacobson perovskite light-emitting diodes
Authors
Issue Date26-Oct-2023
PublisherRoyal Society of Chemistry
Citation
Journal of Materials Chemistry C Materials for optical and electronic devices, 2023, v. 11, n. 41, p. 14207-14216 How to Cite?
AbstractWe investigated the performance of sky-blue quasi-2D Dion-Jacobson perovskite light-emitting diodes as a function of perovskite composition and device architecture. Perovskite composition optimization is needed in order to optimize the film structure to achieve a compromise between efficient funneling and a consequent red shift of the emission, achieving emission in the blue spectral range. Composition optimization was achieved by adjusting the ratio of spacer cations methylenediammonium (MDA) and decanediammonium (DDA) and 3D perovskite CsPbBr3, to achieve films with optimal composition for sky-blue emission. In addition to the perovskite composition, the choice of the hole transport layer (HTL) had a significant effect on device efficiency. Significant enhancement in the efficiency from 1.8% (control device with a self-assembled monolayer HTL) to 4.1% (optimized HTL structure) is achieved by inserting diphenyl-4-triphenylsilylphenyl phosphine oxide (TSPO1) between the HTL layers and the perovskite. This results in an improved balance of electron and hole injection, as well as passivation of defects in the perovskite, which is responsible for the observed improvements in device performance.Increased efficiency of sky-blue LEDs based on Dion-Jacobson perovskite emitters is achieved through the optimization of the hole transport layer-perovskite interface.
Persistent Identifierhttp://hdl.handle.net/10722/336563
ISSN
2023 Impact Factor: 5.7
2023 SCImago Journal Rankings: 1.358
ISI Accession Number ID

 

DC FieldValueLanguage
dc.contributor.authorSun, WT-
dc.contributor.authorHe, YL-
dc.contributor.authorAli, MU-
dc.contributor.authorLiu, QY-
dc.contributor.authorMo, HB-
dc.contributor.authorWang, SJ-
dc.contributor.authorNg, AMC-
dc.contributor.authorDjurisic, AB-
dc.date.accessioned2024-02-16T10:31:41Z-
dc.date.available2024-02-16T10:31:41Z-
dc.date.issued2023-10-26-
dc.identifier.citationJournal of Materials Chemistry C Materials for optical and electronic devices, 2023, v. 11, n. 41, p. 14207-14216-
dc.identifier.issn2050-7526-
dc.identifier.urihttp://hdl.handle.net/10722/336563-
dc.description.abstractWe investigated the performance of sky-blue quasi-2D Dion-Jacobson perovskite light-emitting diodes as a function of perovskite composition and device architecture. Perovskite composition optimization is needed in order to optimize the film structure to achieve a compromise between efficient funneling and a consequent red shift of the emission, achieving emission in the blue spectral range. Composition optimization was achieved by adjusting the ratio of spacer cations methylenediammonium (MDA) and decanediammonium (DDA) and 3D perovskite CsPbBr3, to achieve films with optimal composition for sky-blue emission. In addition to the perovskite composition, the choice of the hole transport layer (HTL) had a significant effect on device efficiency. Significant enhancement in the efficiency from 1.8% (control device with a self-assembled monolayer HTL) to 4.1% (optimized HTL structure) is achieved by inserting diphenyl-4-triphenylsilylphenyl phosphine oxide (TSPO1) between the HTL layers and the perovskite. This results in an improved balance of electron and hole injection, as well as passivation of defects in the perovskite, which is responsible for the observed improvements in device performance.Increased efficiency of sky-blue LEDs based on Dion-Jacobson perovskite emitters is achieved through the optimization of the hole transport layer-perovskite interface.-
dc.languageeng-
dc.publisherRoyal Society of Chemistry-
dc.relation.ispartofJournal of Materials Chemistry C Materials for optical and electronic devices-
dc.titleEffect of the hole transport layer on the performance of sky-blue Dion-Jacobson perovskite light-emitting diodes-
dc.typeArticle-
dc.identifier.doi10.1039/d3tc02546b-
dc.identifier.scopuseid_2-s2.0-85174547151-
dc.identifier.volume11-
dc.identifier.issue41-
dc.identifier.spage14207-
dc.identifier.epage14216-
dc.identifier.eissn2050-7534-
dc.identifier.isiWOS:001086786700001-
dc.publisher.placeCAMBRIDGE-
dc.identifier.issnl2050-7526-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats