Motion Control of a Robot Arm Using Joint Torque Sensors

Abstract

This paper presents a motion control algorithm of a robot arm using joint torque sensors, which calculates part of the control input using measured torques at joints. First, we derive a dynamic model of each joint with a torque sensor, which gives the inverse dynamics of the arm as recursive Newton-Euler equations consisting of only forward path computation. Then, using this model, we design a control law by means of the computed torque method. The resultant control law is robust against parameter variations caused by loading and unloading operations and uncertainties in mass properties of links because the measured torques include information on them. The control law is experimentally applied to a second joint of a direct-drive arm with two degrees of freedom, and the experimental results illustrate the effectiveness of the proposed control algorithm. © 1990 IEEE