Propagation of conductive crack along interface of piezoelectric/piezomagnetic bimaterials

Abstract

This paper investigates the fracture characteristics of a Yoffe conductive crack moving along the interface of piezoelectric (PE)/piezomagnetic (PM) bimaterials. By assuming that the tangential electric- and magnetic-fields along the crack surface are zero and that the speed of the moving crack is lower than the minimum shear wave speed of the bimaterial system, the considered problem can be transformed into a Riemann-Hilbert boundary value problem of vector form. Then, the singularity parameters are exactly solved for different speed regions. In contrast to the anti-plane moving crack model including impermeable and permeable crack-face assumptions along the interface of magnetoelectroelastic (MEE) bimaterials studied before, which shows inverse square-root singularity, three novel kinds of singularities are found as the speed of the moving crack is varied for the present PE/PM interface model, which can be defined as delta(1,2) = - 1/2 +/- i epsilon (Case 1), delta(1,2) = - 1 +/- i epsilon (Case 2) and delta(1,2) = - 1/2 +/- kappa (Case 3), and the third parameter delta(3) = - 1/2 always holds true for all three cases. Two bimaterial combinations, i.e., BaTiO3/CoFe2O4 and BaTiO3/Terfenol-D, are numerically examined. Different from the piezoelectric case, Case 3 does not appear for BaTiO3/CoFe2O4 bimaterial combination. Above all, the singularity parameters significantly depend on the speed of the moving crack and the material properties of bimaterial systems.