File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Diameter- and metallicity-selective enrichment of single- walled carbon nanotubes using polymethacrylates with pendant aromatic functional groups

TitleDiameter- and metallicity-selective enrichment of single- walled carbon nanotubes using polymethacrylates with pendant aromatic functional groups
Authors
KeywordsMetallicity
Transistors
Semiconductors
Single-walled carbon nanotubes
Issue Date2010
Citation
Small, 2010, v. 6, n. 12, p. 1311-1320 How to Cite?
AbstractCurrent methods for the synthesis of single-walled nanotubes (SWNTs) produce mixtures of semiconducting (sem-) and metallic (met-) nanotubes. Most approaches to the chemical separation of sem-/met-SWNTs are based on small neutral molecules or conjugated aromatic polymers, which characteristically have low separation/dispersion efficiencies or present difficulties in the postseparation removal of the polymer so that the resulting field-effect transistors (FETs) have poor performance. In this Full Paper, the use of three polymethacrylates with different pendant aromatic functional groups to separate cobalt-molybdenum catalyst (CoMoCAT) SWNTs according to their metallicity and diameters is reported. UV/Vis/NIR spectroscopy indicates that poly(methyl-methacrylate-co-fluoresceino- acrylate) (PMMAFA) and poly(9-anthracenylmethyl-methacrylate) (PAMMA) preferentially disperse semiconducting SWNTs while poly- (2-naphthylmethacrylate) (PNMA) preferentially disperses metallic SWNTs, all in dimethylforamide (DMF). Photoluminescence excitation (PLE) spectroscopy indicates that all three polymers preferentially disperse smaller-diameter SWNTs, particularly those of (6,5) chirality, in DMF. When chloroform is used instead of DMF, the larger-diameter SWNTs (8,4) and (7,6) are instead selected by PNMA. The solvent effects suggest that diameter selectivity and change of polymer conformation is probably responsible. Change of the polymer fluorescence upon interaction with SWNTs indicates that metallicity selectivity presumably results from the photon-induced dipole-dipole interaction between polymeric chromophore and SWNTs. Thin-film FET devices using semiconductor-enriched solution with PMMAFA have been successfully fabricated and the device performance confirms the sem-SWNTs enrichment with a highly reproducible on/off ratio of about 103. © 2010 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
Persistent Identifierhttp://hdl.handle.net/10722/298497
ISSN
2023 Impact Factor: 13.0
2023 SCImago Journal Rankings: 3.348
ISI Accession Number ID

 

DC FieldValueLanguage
dc.contributor.authorPan, Xiaoyong-
dc.contributor.authorLi, Lain Jong-
dc.contributor.authorChan-Park, Mary B.-
dc.date.accessioned2021-04-08T03:08:37Z-
dc.date.available2021-04-08T03:08:37Z-
dc.date.issued2010-
dc.identifier.citationSmall, 2010, v. 6, n. 12, p. 1311-1320-
dc.identifier.issn1613-6810-
dc.identifier.urihttp://hdl.handle.net/10722/298497-
dc.description.abstractCurrent methods for the synthesis of single-walled nanotubes (SWNTs) produce mixtures of semiconducting (sem-) and metallic (met-) nanotubes. Most approaches to the chemical separation of sem-/met-SWNTs are based on small neutral molecules or conjugated aromatic polymers, which characteristically have low separation/dispersion efficiencies or present difficulties in the postseparation removal of the polymer so that the resulting field-effect transistors (FETs) have poor performance. In this Full Paper, the use of three polymethacrylates with different pendant aromatic functional groups to separate cobalt-molybdenum catalyst (CoMoCAT) SWNTs according to their metallicity and diameters is reported. UV/Vis/NIR spectroscopy indicates that poly(methyl-methacrylate-co-fluoresceino- acrylate) (PMMAFA) and poly(9-anthracenylmethyl-methacrylate) (PAMMA) preferentially disperse semiconducting SWNTs while poly- (2-naphthylmethacrylate) (PNMA) preferentially disperses metallic SWNTs, all in dimethylforamide (DMF). Photoluminescence excitation (PLE) spectroscopy indicates that all three polymers preferentially disperse smaller-diameter SWNTs, particularly those of (6,5) chirality, in DMF. When chloroform is used instead of DMF, the larger-diameter SWNTs (8,4) and (7,6) are instead selected by PNMA. The solvent effects suggest that diameter selectivity and change of polymer conformation is probably responsible. Change of the polymer fluorescence upon interaction with SWNTs indicates that metallicity selectivity presumably results from the photon-induced dipole-dipole interaction between polymeric chromophore and SWNTs. Thin-film FET devices using semiconductor-enriched solution with PMMAFA have been successfully fabricated and the device performance confirms the sem-SWNTs enrichment with a highly reproducible on/off ratio of about 103. © 2010 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.-
dc.languageeng-
dc.relation.ispartofSmall-
dc.subjectMetallicity-
dc.subjectTransistors-
dc.subjectSemiconductors-
dc.subjectSingle-walled carbon nanotubes-
dc.titleDiameter- and metallicity-selective enrichment of single- walled carbon nanotubes using polymethacrylates with pendant aromatic functional groups-
dc.typeArticle-
dc.description.naturelink_to_subscribed_fulltext-
dc.identifier.doi10.1002/smll.200902415-
dc.identifier.pmid20486222-
dc.identifier.scopuseid_2-s2.0-77953427774-
dc.identifier.volume6-
dc.identifier.issue12-
dc.identifier.spage1311-
dc.identifier.epage1320-
dc.identifier.eissn1613-6829-
dc.identifier.isiWOS:000279699400010-
dc.identifier.issnl1613-6810-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats