File Download
  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Evaporation and wetting behavior of silver-graphene hybrid nanofluid droplet on its porous residue surface for various mixing ratios

TitleEvaporation and wetting behavior of silver-graphene hybrid nanofluid droplet on its porous residue surface for various mixing ratios
Authors
KeywordsDroplet evaporation
Wetting
Hybrid nanofluid
Porous residue
Droplet spreading
Issue Date2020
PublisherPergamon. The Journal's web site is located at http://www.elsevier.com/locate/ijhmt
Citation
International Journal of Heat and Mass Transfer, 2020, v. 153, article no. 119618 How to Cite?
AbstractDroplet evaporation offers high heat rejection rates and is widely used in the form of spray cooling or dropwise cooling of various heat dissipating devices. However, due to the limiting heat flux removal capacity of conventional fluids, such as water, these cannot be used in thermal management of high heat flux devices. In this research, the evaporation of silver (Ag)-graphene (GNP) hybrid nanofluid droplet and its residue effects on the evaporation of following Ag-GNP hybrid nanofluid droplet, due to its synergistic thermal properties, is experimentally investigated for various mixing ratios, from MR-1 (0.1(Ag):0.9(GNP)) to MR-5 (0.9(Ag):0.1(GNP)), and different residue sizes. A theoretical model is also proposed for hybrid nanofluid droplet evaporation and semi-empirical relations are developed to estimate the hybrid nanofluid droplet spreading over its residue surface. The results show a substantial increase in the droplet evaporation rate with increasing residue size and decreasing mixing ratio. MR-1 hybrid nanofluid droplet gives the highest evaporation rate (up to 370%) on its highly wetted residue surface, while the evaporation rate significantly drops moving from MR-2 to MR-5 hybrid nanofluid droplets on their partially wetted residue surfaces. Moreover, the evaporation rate substantially increases (up to 240%) with increasing residue size for MR-1 hybrid nanofluid droplet resting on its residue surface, however, the effect of residue size on droplet evaporation rate considerably diminishes moving from MR-2 to MR-5 hybrid nanofluid droplets resting on their respective residues.
Persistent Identifierhttp://hdl.handle.net/10722/286225
ISSN
2023 Impact Factor: 5.0
2023 SCImago Journal Rankings: 1.224
ISI Accession Number ID

 

DC FieldValueLanguage
dc.contributor.authorSiddiqui, FR-
dc.contributor.authorTso, CY-
dc.contributor.authorFu, SC-
dc.contributor.authorQiu, HH-
dc.contributor.authorChao, CYH-
dc.date.accessioned2020-08-31T07:00:55Z-
dc.date.available2020-08-31T07:00:55Z-
dc.date.issued2020-
dc.identifier.citationInternational Journal of Heat and Mass Transfer, 2020, v. 153, article no. 119618-
dc.identifier.issn0017-9310-
dc.identifier.urihttp://hdl.handle.net/10722/286225-
dc.description.abstractDroplet evaporation offers high heat rejection rates and is widely used in the form of spray cooling or dropwise cooling of various heat dissipating devices. However, due to the limiting heat flux removal capacity of conventional fluids, such as water, these cannot be used in thermal management of high heat flux devices. In this research, the evaporation of silver (Ag)-graphene (GNP) hybrid nanofluid droplet and its residue effects on the evaporation of following Ag-GNP hybrid nanofluid droplet, due to its synergistic thermal properties, is experimentally investigated for various mixing ratios, from MR-1 (0.1(Ag):0.9(GNP)) to MR-5 (0.9(Ag):0.1(GNP)), and different residue sizes. A theoretical model is also proposed for hybrid nanofluid droplet evaporation and semi-empirical relations are developed to estimate the hybrid nanofluid droplet spreading over its residue surface. The results show a substantial increase in the droplet evaporation rate with increasing residue size and decreasing mixing ratio. MR-1 hybrid nanofluid droplet gives the highest evaporation rate (up to 370%) on its highly wetted residue surface, while the evaporation rate significantly drops moving from MR-2 to MR-5 hybrid nanofluid droplets on their partially wetted residue surfaces. Moreover, the evaporation rate substantially increases (up to 240%) with increasing residue size for MR-1 hybrid nanofluid droplet resting on its residue surface, however, the effect of residue size on droplet evaporation rate considerably diminishes moving from MR-2 to MR-5 hybrid nanofluid droplets resting on their respective residues.-
dc.languageeng-
dc.publisherPergamon. The Journal's web site is located at http://www.elsevier.com/locate/ijhmt-
dc.relation.ispartofInternational Journal of Heat and Mass Transfer-
dc.rightsThis work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License-
dc.subjectDroplet evaporation-
dc.subjectWetting-
dc.subjectHybrid nanofluid-
dc.subjectPorous residue-
dc.subjectDroplet spreading-
dc.titleEvaporation and wetting behavior of silver-graphene hybrid nanofluid droplet on its porous residue surface for various mixing ratios-
dc.typeArticle-
dc.identifier.emailFu, SC: scfu@hku.hk-
dc.identifier.emailChao, CYH: cyhchao@hku.hk-
dc.identifier.authorityFu, SC=rp02549-
dc.identifier.authorityChao, CYH=rp02396-
dc.description.naturepostprint-
dc.identifier.doi10.1016/j.ijheatmasstransfer.2020.119618-
dc.identifier.scopuseid_2-s2.0-85081281537-
dc.identifier.hkuros313325-
dc.identifier.volume153-
dc.identifier.spagearticle no. 119618-
dc.identifier.epagearticle no. 119618-
dc.identifier.isiWOS:000530718200051-
dc.publisher.placeUnited Kingdom-
dc.identifier.issnl0017-9310-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats