File Download
Links for fulltext
(May Require Subscription)
- Publisher Website: 10.1016/j.jcsr.2019.03.007
- Scopus: eid_2-s2.0-85062838121
- WOS: WOS:000469904300026
- Find via
Supplementary
- Citations:
- Appears in Collections:
Article: Carbon steel and stainless steel bolted connections undergoing unloading and re-loading processes
Title | Carbon steel and stainless steel bolted connections undergoing unloading and re-loading processes |
---|---|
Authors | |
Keywords | Bearing failure Bolted connection Carbon steel and stainless steel Cyclic loading Experimental investigation |
Issue Date | 2019 |
Publisher | Elsevier Ltd. The Journal's web site is located at http://www.elsevier.com/locate/jcsr |
Citation | Journal of Constructional Steel Research, 2019, v. 157, p. 337-346 How to Cite? |
Abstract | A total of 50 bolted connections of carbon steel and stainless steel subjected to monotonic loading and cyclic loading conditions were investigated. The connection specimens were fabricated from carbon steel grades 1.20 mm G500 and 1.90 mm G450, as well as cold-formed stainless steel types EN 1.4301 and EN 1.4162 with nominal thickness 1.50 mm. In the monotonic tests, the specimens were tested under a constant loading rate by the displacement control test method, while in the cyclic tests, the specimens having the same dimensions as those in the monotonic tests were subjected to loading, unloading and re-loading processes, where displacement control and load control test methods were used. The results obtained from the cyclic tests were compared with those obtained from the monotonic tests. It was found that the ultimate loads obtained from the cyclic tests were, on average, larger than those obtained from the monotonic tests for carbon steel bolted connections; this was in contrast with the compared results for stainless steel bolted connections. The elongations corresponding to the ultimate loads obtained from the cyclic tests were, on average, larger than those obtained from the monotonic tests for both carbon steel and stainless steel, which may indicate that the loading processes in the cyclic tests generally delayed the bolted connection specimens from reaching the ultimate loads. Generally, the failure modes in the cyclic tests were consistent with those in the monotonic tests for the same specimen series, where the specimens mainly failed in the connection plate bearing. |
Persistent Identifier | http://hdl.handle.net/10722/273379 |
ISSN | 2023 Impact Factor: 4.0 2023 SCImago Journal Rankings: 1.261 |
ISI Accession Number ID |
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Cai, Y | - |
dc.contributor.author | Young, B | - |
dc.date.accessioned | 2019-08-06T09:27:49Z | - |
dc.date.available | 2019-08-06T09:27:49Z | - |
dc.date.issued | 2019 | - |
dc.identifier.citation | Journal of Constructional Steel Research, 2019, v. 157, p. 337-346 | - |
dc.identifier.issn | 0143-974X | - |
dc.identifier.uri | http://hdl.handle.net/10722/273379 | - |
dc.description.abstract | A total of 50 bolted connections of carbon steel and stainless steel subjected to monotonic loading and cyclic loading conditions were investigated. The connection specimens were fabricated from carbon steel grades 1.20 mm G500 and 1.90 mm G450, as well as cold-formed stainless steel types EN 1.4301 and EN 1.4162 with nominal thickness 1.50 mm. In the monotonic tests, the specimens were tested under a constant loading rate by the displacement control test method, while in the cyclic tests, the specimens having the same dimensions as those in the monotonic tests were subjected to loading, unloading and re-loading processes, where displacement control and load control test methods were used. The results obtained from the cyclic tests were compared with those obtained from the monotonic tests. It was found that the ultimate loads obtained from the cyclic tests were, on average, larger than those obtained from the monotonic tests for carbon steel bolted connections; this was in contrast with the compared results for stainless steel bolted connections. The elongations corresponding to the ultimate loads obtained from the cyclic tests were, on average, larger than those obtained from the monotonic tests for both carbon steel and stainless steel, which may indicate that the loading processes in the cyclic tests generally delayed the bolted connection specimens from reaching the ultimate loads. Generally, the failure modes in the cyclic tests were consistent with those in the monotonic tests for the same specimen series, where the specimens mainly failed in the connection plate bearing. | - |
dc.language | eng | - |
dc.publisher | Elsevier Ltd. The Journal's web site is located at http://www.elsevier.com/locate/jcsr | - |
dc.relation.ispartof | Journal of Constructional Steel Research | - |
dc.rights | This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. | - |
dc.subject | Bearing failure | - |
dc.subject | Bolted connection | - |
dc.subject | Carbon steel and stainless steel | - |
dc.subject | Cyclic loading | - |
dc.subject | Experimental investigation | - |
dc.title | Carbon steel and stainless steel bolted connections undergoing unloading and re-loading processes | - |
dc.type | Article | - |
dc.identifier.email | Cai, Y: yccai@hku.hk | - |
dc.identifier.email | Young, B: young@hku.hk | - |
dc.identifier.authority | Young, B=rp00208 | - |
dc.description.nature | postprint | - |
dc.identifier.doi | 10.1016/j.jcsr.2019.03.007 | - |
dc.identifier.scopus | eid_2-s2.0-85062838121 | - |
dc.identifier.hkuros | 299846 | - |
dc.identifier.volume | 157 | - |
dc.identifier.spage | 337 | - |
dc.identifier.epage | 346 | - |
dc.identifier.isi | WOS:000469904300026 | - |
dc.publisher.place | United Kingdom | - |
dc.identifier.issnl | 0143-974X | - |