Mitigating Ionospheric Artifacts in Coseismic Interferogram Based on Offset Field Derived from ALOS-PALSAR Data

Abstract

© 2016 IEEE. Ionospheric total electron content (TEC) disturbances can seriously influence the signal of low-frequency spaceborne synthetic aperture radar (SAR) systems, e.g., Advanced Land Observation Satellite (ALOS)-phased array-type L-band synthetic aperture radar (PALSAR). With regard to coseismic studies using interferometric synthetic aperture radar (InSAR), it is vital to mitigate the ionospheric artifacts in the contaminated coseismic interferogram. In this paper, we propose a new method for the integral constant calculation, and we then aim to improve the estimation of the ionospheric phase screen (IPS). The proposed method is based on both azimuth and range displacement field maps. At present, the azimuth displacement field can be generated by an offset-tracking procedure or multiple-aperture InSAR (MAI), but the range displacement field can only be estimated by an offset-tracking procedure. We applied ALOS-PALSAR data that were acquired before and after the 2008 Wenchuan earthquake and the 2010 Darfield earthquake to test the proposed method. This case study further showed that ionospheric azimuth streaks were clearly visible in the azimuth displacement field maps of these two cases, one of which was generated using the MAI algorithm and the other using an offset-tracking algorithm. The results confirmed that the long-wavelength ionospheric artifacts in the non-coseismic regions could be corrected by the use of the proposed method. The line-of-sight (LOS) displacement corrections of these two cases, Wenchuan and Darfield, were in the range of -35.9 to 21.0 cm and -6.6 to 10.0 cm along the LOS direction, respectively.