File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Investigation of using micro shear stress sensor array to detect boundary-layer separation point

TitleInvestigation of using micro shear stress sensor array to detect boundary-layer separation point
Authors
KeywordsMicroelectromechanical system
Sensor array
Signal processing
Shear stress
Separation point
Issue Date2006
Citation
Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica, 2006, v. 27, n. 1, p. 142-146 How to Cite?
AbstractAt the boundary layer's separation point, the mean shear stress drops to small value while its fluctuation increases dramatically. This paper present two methods, mean change and root mean square (RMS), to calculate and disposal the voltage output signal. Based on these methods, the ID microelectromechanical system (MEMS) based micro-shear-stress sensor array can be used to detect the location of the separation point. Through combining of two methods and analyzing the simulation data result, the position of the separation point can be detected accurately.
Persistent Identifierhttp://hdl.handle.net/10722/265769
ISSN
2023 SCImago Journal Rankings: 0.397

 

DC FieldValueLanguage
dc.contributor.authorLiu, Kui-
dc.contributor.authorYuan, Wei Zheng-
dc.contributor.authorDeng, Jin Jun-
dc.contributor.authorMa, Bing He-
dc.contributor.authorJiang, Cheng Yu-
dc.date.accessioned2018-12-03T01:21:38Z-
dc.date.available2018-12-03T01:21:38Z-
dc.date.issued2006-
dc.identifier.citationHangkong Xuebao/Acta Aeronautica et Astronautica Sinica, 2006, v. 27, n. 1, p. 142-146-
dc.identifier.issn1000-6893-
dc.identifier.urihttp://hdl.handle.net/10722/265769-
dc.description.abstractAt the boundary layer's separation point, the mean shear stress drops to small value while its fluctuation increases dramatically. This paper present two methods, mean change and root mean square (RMS), to calculate and disposal the voltage output signal. Based on these methods, the ID microelectromechanical system (MEMS) based micro-shear-stress sensor array can be used to detect the location of the separation point. Through combining of two methods and analyzing the simulation data result, the position of the separation point can be detected accurately.-
dc.languageeng-
dc.relation.ispartofHangkong Xuebao/Acta Aeronautica et Astronautica Sinica-
dc.subjectMicroelectromechanical system-
dc.subjectSensor array-
dc.subjectSignal processing-
dc.subjectShear stress-
dc.subjectSeparation point-
dc.titleInvestigation of using micro shear stress sensor array to detect boundary-layer separation point-
dc.typeArticle-
dc.description.naturelink_to_subscribed_fulltext-
dc.identifier.scopuseid_2-s2.0-33646144666-
dc.identifier.volume27-
dc.identifier.issue1-
dc.identifier.spage142-
dc.identifier.epage146-
dc.identifier.issnl1000-6893-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats