Mechanical alloying and electronic simulations of (MgH<inf>2</inf>+M) systems (M=Al, Ti, Fe, Ni, Cu and Nb) for hydrogen storage

Abstract

Mg-based alloys are promising candidates for hydrogen storage applications. Here, mechanical alloying (MA) was used to process powder mixtures of MgH2with 8 mol% M (M=Al, Ti, Fe, Ni, Cu and Nb) in order to modify hydrogen storage properties of the Mg hydride. Electronic simulations of the systems were carried out to clarify the mechanisms of the alloy effects. X-ray diffraction (XRD) of the milled samples revealed the formation of new phases: a bcc solid solution phase for the (MgH2+Nb) mixture; TiH2phase for the (MgH2+Ti); and MgCu2phase for the (MgH2+Cu). For all the mixtures, a high-pressure phase, γ-MgH2, was also identified after mechanical alloying. Further qualitative and quantitative phase analyses were carried out using the Rietveld method. Scanning electron microscopy (SEM) of the milled powder clearly showed substantial particle size reduction after milling. Dehydrogenation at 300°C under vacuum shows that the (MgH2+Ni) mixture gives the highest level of hydrogen desorption and the most rapid kinetics, followed by MgH2with Al, Fe, Nb, Ti and Cu. Theoretical predictions show that the (MgH2+Cu) system is the most unstable, followed by (MgH2+Ni), (MgH2+Fe), (MgH2+Al), (MgH2+Nb), (MgH2+Ti). The predicted alloying effects on the stability of MgH2generally agree with the experimentally observed change in the hydrogen desorption capacity. The differences were discussed in the text. © 2003 International Association for Hydrogen Energy. Published by Elsevier Ltd. All rights reserved.