File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Fly ash-slag interaction during alkaline activation: Influence of activators on phase assemblage and microstructure formation

TitleFly ash-slag interaction during alkaline activation: Influence of activators on phase assemblage and microstructure formation
Authors
KeywordsFly ash-slag blends
Alkali-activated binder
Geopolymer
Alkali-aluminosilicate-hydrate
Calcium-alumina-silicate-hydrate
Issue Date2016
Citation
Construction and Building Materials, 2016, v. 122, p. 594-606 How to Cite?
Abstract© 2016 Elsevier Ltd In this work, the influence of activator on the interaction mechanisms between slag and low-calcium fly ash (FA-F) during alkaline activation was investigated. In particular, the evolution of phase assemblage and microstructure of alkali-activated binary slag and FA-F paste was monitored by means of X-ray diffraction with Rietveld analysis, scanning electron microscopy, and energy-dispersive spectroscopy (SEM/EDS). The results show that the nature of amorphous gels and type of crystalline phases formed are dependent on sample age, initial slag to FA-F ratio, and activator type and dosage. The interaction between FA-F and slag during alkaline activation or geopolymerization is primary demonstrated as: (1) modified nanostructure (e.g. crystallology and lattice parameters) and chemical composition of precipitates, (2) depressing or triggering the formation of some crystalline phases, and (3) spatial heterogeneity of composition in microstructure. The activator is chemically incorporated into interactions between slag and FA-F, and likely affects the dissolution and reaction kinetics.
Persistent Identifierhttp://hdl.handle.net/10722/251635
ISSN
2023 Impact Factor: 7.4
2023 SCImago Journal Rankings: 1.999
ISI Accession Number ID

 

DC FieldValueLanguage
dc.contributor.authorYe, Hailong-
dc.contributor.authorRadlińska, Aleksandra-
dc.date.accessioned2018-03-08T05:00:32Z-
dc.date.available2018-03-08T05:00:32Z-
dc.date.issued2016-
dc.identifier.citationConstruction and Building Materials, 2016, v. 122, p. 594-606-
dc.identifier.issn0950-0618-
dc.identifier.urihttp://hdl.handle.net/10722/251635-
dc.description.abstract© 2016 Elsevier Ltd In this work, the influence of activator on the interaction mechanisms between slag and low-calcium fly ash (FA-F) during alkaline activation was investigated. In particular, the evolution of phase assemblage and microstructure of alkali-activated binary slag and FA-F paste was monitored by means of X-ray diffraction with Rietveld analysis, scanning electron microscopy, and energy-dispersive spectroscopy (SEM/EDS). The results show that the nature of amorphous gels and type of crystalline phases formed are dependent on sample age, initial slag to FA-F ratio, and activator type and dosage. The interaction between FA-F and slag during alkaline activation or geopolymerization is primary demonstrated as: (1) modified nanostructure (e.g. crystallology and lattice parameters) and chemical composition of precipitates, (2) depressing or triggering the formation of some crystalline phases, and (3) spatial heterogeneity of composition in microstructure. The activator is chemically incorporated into interactions between slag and FA-F, and likely affects the dissolution and reaction kinetics.-
dc.languageeng-
dc.relation.ispartofConstruction and Building Materials-
dc.subjectFly ash-slag blends-
dc.subjectAlkali-activated binder-
dc.subjectGeopolymer-
dc.subjectAlkali-aluminosilicate-hydrate-
dc.subjectCalcium-alumina-silicate-hydrate-
dc.titleFly ash-slag interaction during alkaline activation: Influence of activators on phase assemblage and microstructure formation-
dc.typeArticle-
dc.description.naturelink_to_subscribed_fulltext-
dc.identifier.doi10.1016/j.conbuildmat.2016.06.099-
dc.identifier.scopuseid_2-s2.0-84989880979-
dc.identifier.volume122-
dc.identifier.spage594-
dc.identifier.epage606-
dc.identifier.isiWOS:000382340600060-
dc.identifier.issnl0950-0618-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats