File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Three-dimensional Printing of Silver Microarchitectures Using Newtonian Nanoparticle Inks

TitleThree-dimensional Printing of Silver Microarchitectures Using Newtonian Nanoparticle Inks
Authors
Keywords3D printing
3D-printed electronics
meniscus-guided printing
Newtonian fluid ink
silver microarchitecture
Issue Date2017
Citation
ACS Applied Materials & Interfaces, 2017, v. 9, p. 18918-18924 How to Cite?
AbstractAlthough three-dimensional (3D) printing has recently emerged as a technology to potentially bring about the next industrial revolution, the limited selection of usable materials restricts its use to simple prototyping. In particular, metallic 3D printing with submicrometer spatial resolution is essential for the realization of 3D-printed electronics. Herein, a meniscus-guided 3D printing method that exploits a low-viscosity (∼7 mPa·s) silver nanoparticle (AgNP) ink meniscus with Newtonian fluid characteristics (which is compatible with conventional inkjet printers) to fabricate 3D silver microarchitectures is reported. Poly(acrylic acid)-capped AgNP ink that exhibits a continuous ink flow through a confined nozzle without aggregation is designed in this study. Guiding the ink meniscus with controlled direction and speed enables both vertical pulling and layer-by-layer processing, resulting in the creation of 3D microobjects with designed shapes other than those for simple wiring. Various highly conductive (>104 S·cm–1) 3D metallic patterns are demonstrated for applications in electronic devices. This research is expected to widen the range of materials that can be employed in 3D printing technology, with the aim of moving 3D printing beyond prototyping and into real manufacturing platforms for future electronics.
Persistent Identifierhttp://hdl.handle.net/10722/243121
ISSN
2020 Impact Factor: 9.229
2015 SCImago Journal Rankings: 2.381
ISI Accession Number ID

 

DC FieldValueLanguage
dc.contributor.authorLee, S-
dc.contributor.authorKim, JH-
dc.contributor.authorWajahat, M-
dc.contributor.authorJeong, H-
dc.contributor.authorChang, WS-
dc.contributor.authorCho, SH-
dc.contributor.authorKim, J-
dc.contributor.authorSeol, SK-
dc.date.accessioned2017-08-25T02:50:18Z-
dc.date.available2017-08-25T02:50:18Z-
dc.date.issued2017-
dc.identifier.citationACS Applied Materials & Interfaces, 2017, v. 9, p. 18918-18924-
dc.identifier.issn1944-8244-
dc.identifier.urihttp://hdl.handle.net/10722/243121-
dc.description.abstractAlthough three-dimensional (3D) printing has recently emerged as a technology to potentially bring about the next industrial revolution, the limited selection of usable materials restricts its use to simple prototyping. In particular, metallic 3D printing with submicrometer spatial resolution is essential for the realization of 3D-printed electronics. Herein, a meniscus-guided 3D printing method that exploits a low-viscosity (∼7 mPa·s) silver nanoparticle (AgNP) ink meniscus with Newtonian fluid characteristics (which is compatible with conventional inkjet printers) to fabricate 3D silver microarchitectures is reported. Poly(acrylic acid)-capped AgNP ink that exhibits a continuous ink flow through a confined nozzle without aggregation is designed in this study. Guiding the ink meniscus with controlled direction and speed enables both vertical pulling and layer-by-layer processing, resulting in the creation of 3D microobjects with designed shapes other than those for simple wiring. Various highly conductive (>104 S·cm–1) 3D metallic patterns are demonstrated for applications in electronic devices. This research is expected to widen the range of materials that can be employed in 3D printing technology, with the aim of moving 3D printing beyond prototyping and into real manufacturing platforms for future electronics.-
dc.languageeng-
dc.relation.ispartofACS Applied Materials & Interfaces-
dc.subject3D printing-
dc.subject3D-printed electronics-
dc.subjectmeniscus-guided printing-
dc.subjectNewtonian fluid ink-
dc.subjectsilver microarchitecture-
dc.titleThree-dimensional Printing of Silver Microarchitectures Using Newtonian Nanoparticle Inks-
dc.typeArticle-
dc.identifier.emailKim, J: jtkim@hku.hk-
dc.identifier.authorityKim, J=rp02152-
dc.identifier.doi10.1021/acsami.7b02581-
dc.identifier.scopuseid_2-s2.0-85020268050-
dc.identifier.hkuros273782-
dc.identifier.volume9-
dc.identifier.spage18918-
dc.identifier.epage18924-
dc.identifier.eissn1944-8252-
dc.identifier.isiWOS:000403136400059-
dc.identifier.issnl1944-8244-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats