File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Innovations in bonding to zirconia-based materials. Part II: Focusing on chemical interactions

TitleInnovations in bonding to zirconia-based materials. Part II: Focusing on chemical interactions
Authors
KeywordsDental cements
Microtensile bond strength
Primers
Silanes
Zirconia
Issue Date2009
PublisherElsevier Inc. The Journal's web site is located at http://www.elsevier.com/locate/dental
Citation
Dental Materials, 2009, v. 25 n. 8, p. 989-993 How to Cite?
AbstractObjectives: The zirconia-resin bond strength was enhanced using novel engineered zirconia primers in combination with selective infiltration etching as a surface pre-treatment. The aim of this study was to evaluate the effect of artificial aging on the chemical stability of the established bond and to understand the activation mechanism of the used primers. Methods: Selective infiltration etched zirconia discs (Procera; NobelBiocare) were coated with one of four novel engineered zirconia primers containing reactive monomers and were bonded to resin-composite discs (Panavia F2.0). Fourier transform infrared spectroscopy (FT-IR) was carried out to examine the chemical activation of zirconia primers from mixing time and up to 60 min. The bilayered specimens were cut into microbars (1 mm2 in cross-section area) and zirconia-resin microtensile bond strength (MTBS) was evaluated immediately and after 90 days of water storage at 37 °C. Scanning electron microscopy (SEM) was used to analyze the fracture surface. Results: There was a significant drop in MTBS values after 90 days of water storage for all tested zirconia primers from ca. 28-41 MPa to ca. 15-18 MPa after completion of artificial aging. SEM revealed increase in percentage of interfacial failure after water storage. FTIR spectra suggested adequate activation of the experimental zirconia primers within 1 h of mixing time. Significance: The novel engineered zirconia primers produced initially high bond strength values which were significantly reduced after water storage. Long-term bond stability requires developing more stable primers. © 2009 Academy of Dental Materials.
Persistent Identifierhttp://hdl.handle.net/10722/154572
ISSN
2023 Impact Factor: 4.6
2023 SCImago Journal Rankings: 1.186
ISI Accession Number ID
References

 

DC FieldValueLanguage
dc.contributor.authorAboushelib, MNen_US
dc.contributor.authorMirmohamadi, Hen_US
dc.contributor.authorMatinlinna, JPen_US
dc.contributor.authorKukk, Een_US
dc.contributor.authorOunsi, HFen_US
dc.contributor.authorSalameh, Zen_US
dc.date.accessioned2012-08-08T08:26:14Z-
dc.date.available2012-08-08T08:26:14Z-
dc.date.issued2009en_US
dc.identifier.citationDental Materials, 2009, v. 25 n. 8, p. 989-993en_US
dc.identifier.issn0109-5641en_US
dc.identifier.urihttp://hdl.handle.net/10722/154572-
dc.description.abstractObjectives: The zirconia-resin bond strength was enhanced using novel engineered zirconia primers in combination with selective infiltration etching as a surface pre-treatment. The aim of this study was to evaluate the effect of artificial aging on the chemical stability of the established bond and to understand the activation mechanism of the used primers. Methods: Selective infiltration etched zirconia discs (Procera; NobelBiocare) were coated with one of four novel engineered zirconia primers containing reactive monomers and were bonded to resin-composite discs (Panavia F2.0). Fourier transform infrared spectroscopy (FT-IR) was carried out to examine the chemical activation of zirconia primers from mixing time and up to 60 min. The bilayered specimens were cut into microbars (1 mm2 in cross-section area) and zirconia-resin microtensile bond strength (MTBS) was evaluated immediately and after 90 days of water storage at 37 °C. Scanning electron microscopy (SEM) was used to analyze the fracture surface. Results: There was a significant drop in MTBS values after 90 days of water storage for all tested zirconia primers from ca. 28-41 MPa to ca. 15-18 MPa after completion of artificial aging. SEM revealed increase in percentage of interfacial failure after water storage. FTIR spectra suggested adequate activation of the experimental zirconia primers within 1 h of mixing time. Significance: The novel engineered zirconia primers produced initially high bond strength values which were significantly reduced after water storage. Long-term bond stability requires developing more stable primers. © 2009 Academy of Dental Materials.en_US
dc.languageengen_US
dc.publisherElsevier Inc. The Journal's web site is located at http://www.elsevier.com/locate/dentalen_US
dc.relation.ispartofDental Materialsen_US
dc.rightsDental Materials. Copyright © Elsevier Inc.-
dc.subjectDental cements-
dc.subjectMicrotensile bond strength-
dc.subjectPrimers-
dc.subjectSilanes-
dc.subjectZirconia-
dc.subject.meshChemical Processesen_US
dc.subject.meshDental Bonding - Methodsen_US
dc.subject.meshDental Etching - Methodsen_US
dc.subject.meshDental Porcelain - Chemistryen_US
dc.subject.meshDental Stress Analysisen_US
dc.subject.meshHydrolysisen_US
dc.subject.meshResin Cements - Chemistryen_US
dc.subject.meshSilanes - Chemistryen_US
dc.subject.meshTensile Strengthen_US
dc.subject.meshTime Factorsen_US
dc.subject.meshZirconium - Chemistryen_US
dc.titleInnovations in bonding to zirconia-based materials. Part II: Focusing on chemical interactionsen_US
dc.typeArticleen_US
dc.identifier.emailMatinlinna, JP:jpmat@hku.hken_US
dc.identifier.authorityMatinlinna, JP=rp00052en_US
dc.description.naturelink_to_subscribed_fulltexten_US
dc.identifier.doi10.1016/j.dental.2009.02.011en_US
dc.identifier.pmid19324404-
dc.identifier.scopuseid_2-s2.0-67649353000en_US
dc.identifier.hkuros161341-
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-67649353000&selection=ref&src=s&origin=recordpageen_US
dc.identifier.volume25en_US
dc.identifier.issue8en_US
dc.identifier.spage989en_US
dc.identifier.epage993en_US
dc.identifier.eissn1879-0097-
dc.identifier.isiWOS:000268421000008-
dc.publisher.placeUnited Statesen_US
dc.identifier.scopusauthoridAboushelib, MN=9248454200en_US
dc.identifier.scopusauthoridMirmohamadi, H=26326919400en_US
dc.identifier.scopusauthoridMatinlinna, JP=6602419428en_US
dc.identifier.scopusauthoridKukk, E=18836275500en_US
dc.identifier.scopusauthoridOunsi, HF=9267589900en_US
dc.identifier.scopusauthoridSalameh, Z=16043747600en_US
dc.identifier.citeulike5495736-
dc.identifier.issnl0109-5641-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats