File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Wireless control of load current sharing information for parallel-connected DC/DC power converters

TitleWireless control of load current sharing information for parallel-connected DC/DC power converters
Authors
Lai, YMTan, SCTsang, YM
Issue Date2009
Citation
Iet Power Electronics, 2009, v. 2 n. 1, p. 14-21 How to Cite?
DOI: http://dx.doi.org/10.1049/iet-pel:20070311
AbstractAn alternative means of communicating the load-sharing information among parallel-connected converters through the se of a wireless digital communication technique is presented. The idea is experimentally tested using two buck converters parallel-connected under the Master/Slave current-sharing (CS) configuration. The results show current distribution property of the converter system under the proposed wireless control scheme are similar to those obtained from a fixed-wire CS controller. © The Institution of Engineering and Technology.
Persistent Identifierhttp://hdl.handle.net/10722/148912
ISSN
1755-4535
2021 Impact Factor: 2.112
2020 SCImago Journal Rankings: 0.637
ISI Accession Number ID
WOS:000276384700002
References
References in Scopus

 

DC FieldValueLanguage
dc.contributor.authorLai, YMen_HK
dc.contributor.authorTan, SCen_HK
dc.contributor.authorTsang, YMen_HK
dc.date.accessioned2012-06-20T06:16:17Z-
dc.date.available2012-06-20T06:16:17Z-
dc.date.issued2009en_HK
dc.identifier.citationIet Power Electronics, 2009, v. 2 n. 1, p. 14-21en_HK
dc.identifier.issn1755-4535en_HK
dc.identifier.urihttp://hdl.handle.net/10722/148912-
dc.description.abstractAn alternative means of communicating the load-sharing information among parallel-connected converters through the se of a wireless digital communication technique is presented. The idea is experimentally tested using two buck converters parallel-connected under the Master/Slave current-sharing (CS) configuration. The results show current distribution property of the converter system under the proposed wireless control scheme are similar to those obtained from a fixed-wire CS controller. © The Institution of Engineering and Technology.en_HK
dc.languageengen_US
dc.relation.ispartofIET Power Electronicsen_HK
dc.titleWireless control of load current sharing information for parallel-connected DC/DC power convertersen_HK
dc.typeArticleen_HK
dc.identifier.emailTan, SC:sctan@hku.hken_HK
dc.identifier.authorityTan, SC=rp01606en_HK
dc.description.naturelink_to_subscribed_fulltexten_US
dc.identifier.doi10.1049/iet-pel:20070311en_HK
dc.identifier.scopuseid_2-s2.0-78651587576en_HK
dc.identifier.hkuros228391-
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-78651587576&selection=ref&src=s&origin=recordpageen_HK
dc.identifier.volume2en_HK
dc.identifier.issue1en_HK
dc.identifier.spage14en_HK
dc.identifier.epage21en_HK
dc.identifier.isiWOS:000276384700002-
dc.identifier.scopusauthoridLai, YM=7401512093en_HK
dc.identifier.scopusauthoridTan, SC=26642772000en_HK
dc.identifier.scopusauthoridTsang, YM=7007101159en_HK
dc.identifier.issnl1755-4535-

Export via OAI-PMH Interface in XML Formats

OR

Export to Other Non-XML Formats