File Download
  Links for fulltext
     (May Require Subscription)
Supplementary

Conference Paper: Influence of the device architecture to the ITO surface treatment effects on organic solar cell performance

TitleInfluence of the device architecture to the ITO surface treatment effects on organic solar cell performance
Authors
KeywordsCopper phthalocyanine
ITO treatments
Organic solar cells
Issue Date2004
PublisherS P I E - International Society for Optical Engineering. The Journal's web site is located at http://spie.org/x1848.xml
Citation
Proceedings Of Spie - The International Society For Optical Engineering, 2004, v. 5215, p. 153-160 How to Cite?
AbstractIn this work, we investigate the influence of different indium tin oxide (ITO) surface treatments on the performance of organic solar cells with different device architectures. Two layer cells with different layer hierarchy (ITO/copper phthalocyanine (CuPc)/fullereve (C60/Al and ITO/C 60/CuPc/Cu) and three layer cells with mixed layer inserted between CuPc and C60 were fabricated. We found that in all cases the short circuit current was the parameter which was most significantly affected by ITO surface treatment. However, the performance of the cells with C60 layer in contact with ITO was markedly less sensitive to the ITO surface treatments compared to the cells with CuPc in contact with ITO. The cells with C60 layer in contact with ITO also exhibited higher efficiency compared to the cells with CuPc in contact with ITO. We also fabricated two layer cells with structures ITO/CuPc/perylene tetracarboxylic acid diimide (PTCDI)/Al and ITO/PTCDI/CuPc/Cu. In this case, we also obtain higher efficiency and lower sensitivity to ITO properties when "n type" material is in contact with ITO. The best obtained AMI power conversion efficiency was 0.4% for ITO/PTCDI/CuPc/Cu cell and ITO/C60/CuPc:C60/CuPc/Cu cells.
Persistent Identifierhttp://hdl.handle.net/10722/45701
ISSN
References

 

DC FieldValueLanguage
dc.contributor.authorKwong, CYen_HK
dc.contributor.authorDjurišić, ABen_HK
dc.contributor.authorChui, PCen_HK
dc.contributor.authorChan, WKen_HK
dc.date.accessioned2007-10-30T06:33:04Z-
dc.date.available2007-10-30T06:33:04Z-
dc.date.issued2004en_HK
dc.identifier.citationProceedings Of Spie - The International Society For Optical Engineering, 2004, v. 5215, p. 153-160en_HK
dc.identifier.issn0277-786Xen_HK
dc.identifier.urihttp://hdl.handle.net/10722/45701-
dc.description.abstractIn this work, we investigate the influence of different indium tin oxide (ITO) surface treatments on the performance of organic solar cells with different device architectures. Two layer cells with different layer hierarchy (ITO/copper phthalocyanine (CuPc)/fullereve (C60/Al and ITO/C 60/CuPc/Cu) and three layer cells with mixed layer inserted between CuPc and C60 were fabricated. We found that in all cases the short circuit current was the parameter which was most significantly affected by ITO surface treatment. However, the performance of the cells with C60 layer in contact with ITO was markedly less sensitive to the ITO surface treatments compared to the cells with CuPc in contact with ITO. The cells with C60 layer in contact with ITO also exhibited higher efficiency compared to the cells with CuPc in contact with ITO. We also fabricated two layer cells with structures ITO/CuPc/perylene tetracarboxylic acid diimide (PTCDI)/Al and ITO/PTCDI/CuPc/Cu. In this case, we also obtain higher efficiency and lower sensitivity to ITO properties when "n type" material is in contact with ITO. The best obtained AMI power conversion efficiency was 0.4% for ITO/PTCDI/CuPc/Cu cell and ITO/C60/CuPc:C60/CuPc/Cu cells.en_HK
dc.format.extent545641 bytes-
dc.format.extent30720 bytes-
dc.format.extent3553 bytes-
dc.format.extent2715 bytes-
dc.format.extent4681 bytes-
dc.format.mimetypeapplication/pdf-
dc.format.mimetypeapplication/msword-
dc.format.mimetypetext/plain-
dc.format.mimetypetext/plain-
dc.format.mimetypetext/plain-
dc.languageengen_HK
dc.publisherS P I E - International Society for Optical Engineering. The Journal's web site is located at http://spie.org/x1848.xmlen_HK
dc.relation.ispartofProceedings of SPIE - The International Society for Optical Engineeringen_HK
dc.rightsCreative Commons: Attribution 3.0 Hong Kong License-
dc.rightsS P I E - the International Society for Optical Proceedings. Copyright © S P I E - International Society for Optical Engineering.en_HK
dc.rightsCopyright 2004 Society of Photo-Optical Instrumentation Engineers. This paper was published in Organic photovoltaics IV, San Diego, California, USA, 7-8 August 2003, v. 5215, p. 153-160 and is made available as an electronic reprint with permission of SPIE. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper are prohibited.en_HK
dc.subjectCopper phthalocyanineen_HK
dc.subjectITO treatmentsen_HK
dc.subjectOrganic solar cellsen_HK
dc.titleInfluence of the device architecture to the ITO surface treatment effects on organic solar cell performanceen_HK
dc.typeConference_Paperen_HK
dc.identifier.openurlhttp://library.hku.hk:4550/resserv?sid=HKU:IR&issn=0277-786X&volume=5215&spage=153&epage=160&date=2004&atitle=Influence+of+the+device+architecture+to+the+ITO+surface+treatment+effects+on+organic+solar+cell+performanceen_HK
dc.identifier.emailDjurišić, AB: dalek@hku.hken_HK
dc.identifier.emailChui, PC: pcchui@hkucc.hku.hken_HK
dc.identifier.emailChan, WK: waichan@hku.hken_HK
dc.identifier.authorityDjurišić, AB=rp00690en_HK
dc.identifier.authorityChui, PC=rp00114en_HK
dc.identifier.authorityChan, WK=rp00667en_HK
dc.description.naturepublished_or_final_versionen_HK
dc.identifier.doi10.1117/12.502907en_HK
dc.identifier.scopuseid_2-s2.0-1942537873en_HK
dc.identifier.hkuros90357-
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-1942537873&selection=ref&src=s&origin=recordpageen_HK
dc.identifier.volume5215en_HK
dc.identifier.spage153en_HK
dc.identifier.epage160en_HK
dc.publisher.placeUnited Statesen_HK
dc.identifier.scopusauthoridKwong, CY=35917741900en_HK
dc.identifier.scopusauthoridDjurišić, AB=7004904830en_HK
dc.identifier.scopusauthoridChui, PC=13309913400en_HK
dc.identifier.scopusauthoridChan, WK=13310083000en_HK

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats