File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Conference Paper: Laser beam multi-position alignment approach for an automated industrial robot calibration

TitleLaser beam multi-position alignment approach for an automated industrial robot calibration
Authors
Issue Date2014
Citation
4th Annual IEEE International Conference on Cyber Technology in Automation, Control and Intelligent Systems, IEEE-CYBER 2014, 2014, p. 359-364 How to Cite?
Abstract© 2014 IEEE. Robot calibration is widely used in the manufacture industry to enhance the accuracy of industrial robots. There are many reliable calibration systems in the market that are able to calibrate industrial robots. Those systems, however, are far from being a user friendly calibration tool; they are time consuming, very expensive, and usually requires too much human interaction. This paper proposes an innovative calibration approach for industrial robots able to overcome the problems that the current calibration systems are still facing. The proposed approach uses a control system capable of guiding the robot's tool center point to an accurate multi-position alignment. Using the data of several positions, we are able to calculate the joint offsets using calibration algorithms. Throughout this paper the overall calibration system is presented and discussed. Finally, preliminary experimental results demonstrated the feasibility of the overall calibration system including device hardware, software and calibration algorithms.
Persistent Identifierhttp://hdl.handle.net/10722/213437

 

DC FieldValueLanguage
dc.contributor.authorNieves, Erick-
dc.contributor.authorXi, Ning-
dc.contributor.authorLi, Xiongzi-
dc.contributor.authorMartinez, Carlos-
dc.contributor.authorZhang, George-
dc.date.accessioned2015-07-28T04:07:16Z-
dc.date.available2015-07-28T04:07:16Z-
dc.date.issued2014-
dc.identifier.citation4th Annual IEEE International Conference on Cyber Technology in Automation, Control and Intelligent Systems, IEEE-CYBER 2014, 2014, p. 359-364-
dc.identifier.urihttp://hdl.handle.net/10722/213437-
dc.description.abstract© 2014 IEEE. Robot calibration is widely used in the manufacture industry to enhance the accuracy of industrial robots. There are many reliable calibration systems in the market that are able to calibrate industrial robots. Those systems, however, are far from being a user friendly calibration tool; they are time consuming, very expensive, and usually requires too much human interaction. This paper proposes an innovative calibration approach for industrial robots able to overcome the problems that the current calibration systems are still facing. The proposed approach uses a control system capable of guiding the robot's tool center point to an accurate multi-position alignment. Using the data of several positions, we are able to calculate the joint offsets using calibration algorithms. Throughout this paper the overall calibration system is presented and discussed. Finally, preliminary experimental results demonstrated the feasibility of the overall calibration system including device hardware, software and calibration algorithms.-
dc.languageeng-
dc.relation.ispartof4th Annual IEEE International Conference on Cyber Technology in Automation, Control and Intelligent Systems, IEEE-CYBER 2014-
dc.titleLaser beam multi-position alignment approach for an automated industrial robot calibration-
dc.typeConference_Paper-
dc.description.natureLink_to_subscribed_fulltext-
dc.identifier.doi10.1109/CYBER.2014.6917490-
dc.identifier.scopuseid_2-s2.0-84910628239-
dc.identifier.spage359-
dc.identifier.epage364-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats