File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Conference Paper: Development of an automatic optical measurement system for automotive part surface inspection

TitleDevelopment of an automatic optical measurement system for automotive part surface inspection
Authors
Issue Date2005
Citation
IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM, 2005, v. 2, p. 1557-1562 How to Cite?
AbstractThis paper introduces an automated 3D optical measurement system. In industrial inspection, Coordinate Measurement Machines (CMMs) provide accurate measurement but are very time consuming because only one point can be acquired each time. An area sensor based robotic 3D measurement system can acquire an automotive part's surface patch-by-patch, which reduces the inspection time significantly. This paper describes a pixel-to-pixel sensor calibration scheme and a bounding box based sensor planning method which are developed for the automatic optical measurement system of large and complex surfaces. Experiment results are presented and discussed. © 2005 IEEE.
Persistent Identifierhttp://hdl.handle.net/10722/212833

 

DC FieldValueLanguage
dc.contributor.authorShi, Quan-
dc.contributor.authorXi, Ning-
dc.contributor.authorChen, Yifan-
dc.date.accessioned2015-07-28T04:05:09Z-
dc.date.available2015-07-28T04:05:09Z-
dc.date.issued2005-
dc.identifier.citationIEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM, 2005, v. 2, p. 1557-1562-
dc.identifier.urihttp://hdl.handle.net/10722/212833-
dc.description.abstractThis paper introduces an automated 3D optical measurement system. In industrial inspection, Coordinate Measurement Machines (CMMs) provide accurate measurement but are very time consuming because only one point can be acquired each time. An area sensor based robotic 3D measurement system can acquire an automotive part's surface patch-by-patch, which reduces the inspection time significantly. This paper describes a pixel-to-pixel sensor calibration scheme and a bounding box based sensor planning method which are developed for the automatic optical measurement system of large and complex surfaces. Experiment results are presented and discussed. © 2005 IEEE.-
dc.languageeng-
dc.relation.ispartofIEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM-
dc.titleDevelopment of an automatic optical measurement system for automotive part surface inspection-
dc.typeConference_Paper-
dc.description.natureLink_to_subscribed_fulltext-
dc.identifier.scopuseid_2-s2.0-27644471533-
dc.identifier.volume2-
dc.identifier.spage1557-
dc.identifier.epage1562-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats