File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Conference Paper: Sensor planning with kinematics constraint for dimensional inspection of sheet metal parts

TitleSensor planning with kinematics constraint for dimensional inspection of sheet metal parts
Authors
Issue Date2001
Citation
IEEE International Conference on Intelligent Robots and Systems, 2001, v. 3, p. 1720-1725 How to Cite?
AbstractSensor planning is critical in many inspection systems. In typical part dimensional inspection systems, eye-in-hand robots are usually adopted. One practical problem that needs to be addressed is that the viewpoints, or correspondingly, the robot hand-tip positions and orientations, should be within the robot's reachability space. Furthermore, it is desirable that the robot can reach these viewpoints "comfortably". In this sense the robot kinematics constraint should be considered in sensor planning. In this paper, a new approach is developed to integrate the kinematics constraint into sensor planning. This approach models the problem as an integer programming problem. With this approach, the computation burden of the robot placement problem can be avoided. Experiment and simulation results demonstrate the effectiveness of our approach.
Persistent Identifierhttp://hdl.handle.net/10722/212739

 

DC FieldValueLanguage
dc.contributor.authorSheng, Weihua-
dc.contributor.authorXi, Ning-
dc.contributor.authorSong, Mumin-
dc.contributor.authorChen, Yifan-
dc.date.accessioned2015-07-28T04:04:51Z-
dc.date.available2015-07-28T04:04:51Z-
dc.date.issued2001-
dc.identifier.citationIEEE International Conference on Intelligent Robots and Systems, 2001, v. 3, p. 1720-1725-
dc.identifier.urihttp://hdl.handle.net/10722/212739-
dc.description.abstractSensor planning is critical in many inspection systems. In typical part dimensional inspection systems, eye-in-hand robots are usually adopted. One practical problem that needs to be addressed is that the viewpoints, or correspondingly, the robot hand-tip positions and orientations, should be within the robot's reachability space. Furthermore, it is desirable that the robot can reach these viewpoints "comfortably". In this sense the robot kinematics constraint should be considered in sensor planning. In this paper, a new approach is developed to integrate the kinematics constraint into sensor planning. This approach models the problem as an integer programming problem. With this approach, the computation burden of the robot placement problem can be avoided. Experiment and simulation results demonstrate the effectiveness of our approach.-
dc.languageeng-
dc.relation.ispartofIEEE International Conference on Intelligent Robots and Systems-
dc.titleSensor planning with kinematics constraint for dimensional inspection of sheet metal parts-
dc.typeConference_Paper-
dc.description.natureLink_to_subscribed_fulltext-
dc.identifier.scopuseid_2-s2.0-0035559878-
dc.identifier.volume3-
dc.identifier.spage1720-
dc.identifier.epage1725-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats