File Download
  Links for fulltext
     (May Require Subscription)
Supplementary

Conference Paper: RFID-enabled real-time manufacturing for automotive part and accessory suppliers

TitleRFID-enabled real-time manufacturing for automotive part and accessory suppliers
Authors
KeywordsAutomotive alliances
Automotive part and accessory manufacturers
Manufacturing execution system
Real-time manufacturing
RFID / auto id
Issue Date2010
PublisherIEEE. The Journal's web site is located at http://ieeexplore.ieee.org/xpl/conhome.jsp?punumber=1800022
Citation
The 40th International Conference on Computers and Industrial Engineering (CIE 2010), Awaji, Japan, 25-28 July 2010. In Proceedings of CIE40, 2010, p. 1-6 How to Cite?
AbstractAutomotive part and accessory manufacturers (APAMs) at the lower tiers of the automotive vertical have been following leading vehicle assemblers in adopting RFID (Radio Frequency Identification) and ubiquitous computing technologies, aiming to alleviate their advanced manufacturing systems. RFID-enabled real-time traceability and visibility facilitate the implementation of advanced strategies such as Just-In-Time (JIT) lean / responsive manufacturing and mass customization (MC). Being typically small and medium sized, however, APAMs are faced up with business and technical challenges which are summarized by the so-called "three high problems". They are high cost, high risk and high level of requirement for technical skills. Based on a series of industrial field studies, this paper establishes an innovative service-oriented business model for overcoming the "three high Problems" based on the concept of Product Service Systems (PSS) and RFID gateway technology.
Persistent Identifierhttp://hdl.handle.net/10722/135888
ISBN
References

 

DC FieldValueLanguage
dc.contributor.authorHuang, GQen_HK
dc.contributor.authorQu, Ten_HK
dc.contributor.authorZhang, Yen_HK
dc.contributor.authorYang, HDen_HK
dc.date.accessioned2011-07-27T01:50:04Z-
dc.date.available2011-07-27T01:50:04Z-
dc.date.issued2010en_HK
dc.identifier.citationThe 40th International Conference on Computers and Industrial Engineering (CIE 2010), Awaji, Japan, 25-28 July 2010. In Proceedings of CIE40, 2010, p. 1-6en_HK
dc.identifier.isbn978-1-4244-7295-6en_US
dc.identifier.urihttp://hdl.handle.net/10722/135888-
dc.description.abstractAutomotive part and accessory manufacturers (APAMs) at the lower tiers of the automotive vertical have been following leading vehicle assemblers in adopting RFID (Radio Frequency Identification) and ubiquitous computing technologies, aiming to alleviate their advanced manufacturing systems. RFID-enabled real-time traceability and visibility facilitate the implementation of advanced strategies such as Just-In-Time (JIT) lean / responsive manufacturing and mass customization (MC). Being typically small and medium sized, however, APAMs are faced up with business and technical challenges which are summarized by the so-called "three high problems". They are high cost, high risk and high level of requirement for technical skills. Based on a series of industrial field studies, this paper establishes an innovative service-oriented business model for overcoming the "three high Problems" based on the concept of Product Service Systems (PSS) and RFID gateway technology.en_HK
dc.languageengen_US
dc.publisherIEEE. The Journal's web site is located at http://ieeexplore.ieee.org/xpl/conhome.jsp?punumber=1800022-
dc.relation.ispartofProceedings of the International Conference on Computers and Industrial Engineering, CIE40 2010en_HK
dc.rightsProceedings of the International Conference on Computers and Industrial Engineering. Copyright © IEEE.-
dc.rightsCreative Commons: Attribution 3.0 Hong Kong License-
dc.rights©2010 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.-
dc.subjectAutomotive alliancesen_HK
dc.subjectAutomotive part and accessory manufacturersen_HK
dc.subjectManufacturing execution systemen_HK
dc.subjectReal-time manufacturingen_HK
dc.subjectRFID / auto iden_HK
dc.titleRFID-enabled real-time manufacturing for automotive part and accessory suppliersen_HK
dc.typeConference_Paperen_HK
dc.identifier.emailHuang, GQ:gqhuang@hkucc.hku.hken_HK
dc.identifier.emailQu, T:quting@hku.hken_HK
dc.identifier.authorityHuang, GQ=rp00118en_HK
dc.identifier.authorityQu, T=rp01500en_HK
dc.description.naturepublished_or_final_version-
dc.identifier.doi10.1109/ICCIE.2010.5668244en_HK
dc.identifier.scopuseid_2-s2.0-78651426419en_HK
dc.identifier.hkuros186252en_US
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-78651426419&selection=ref&src=s&origin=recordpageen_HK
dc.identifier.spage1en_US
dc.identifier.epage6en_US
dc.description.otherThe 40th International Conference on Computers and Industrial Engineering (CIE 2010), Awaji, Japan, 25-28 July 2010. In Proceedings of CIE40, 2010, p. 1-6-
dc.identifier.scopusauthoridHuang, GQ=7403425048en_HK
dc.identifier.scopusauthoridQu, T=35590322600en_HK
dc.identifier.scopusauthoridZhang, Y=8305738300en_HK
dc.identifier.scopusauthoridYang, HD=36916181100en_HK

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats