File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Fabrication of Li2TiO3 pebbles by water-based sol-gel method

TitleFabrication of Li2TiO3 pebbles by water-based sol-gel method
Authors
Wu, XWen, ZHan, JXu, XLin, B
KeywordsBreeder Material
Lithium Titanate
Pebble
Sol-Gel
Issue Date2008
PublisherElsevier BV. The Journal's web site is located at http://www.elsevier.com/locate/fusengdes
Citation
Fusion Engineering and Design, 2008, v. 83 n. 1, p. 112-116 How to Cite?
DOI: http://dx.doi.org/10.1016/j.fusengdes.2007.09.005
AbstractFabrication of Li2TiO3 pebbles by wet process received great attention for their convenience to realize mass production and good performances. Li2TiO3 pebbles with about 1.4 mm in diameter were prepared by a water-based sol-gel method using Ti(C4H9O)4 and LiNO3 as raw materials. This process is simple and has not been reported previously. Phase analysis, thermal analysis and morphological observation were carried out with the pebbles. The experimental results showed that a large amount of pores were presented on the surface of the pebbles and the density of the pebbles was sensitive to the sintering temperature. The pebbles sintered at 1200 °C for 10 h reached a density of ∼68%T.D. The shape of the pebbles was favorable with an average sphericity of about 1.08. © 2007 Elsevier B.V. All rights reserved.
Persistent Identifierhttp://hdl.handle.net/10722/90947
ISSN
0920-3796
2023 Impact Factor: 1.9
2023 SCImago Journal Rankings: 0.563
ISI Accession Number ID
WOS:000253275500015
References
References in Scopus

 

DC FieldValueLanguage
dc.contributor.authorWu, Xen_HK
dc.contributor.authorWen, Zen_HK
dc.contributor.authorHan, Jen_HK
dc.contributor.authorXu, Xen_HK
dc.contributor.authorLin, Ben_HK
dc.date.accessioned2010-09-17T10:10:46Z-
dc.date.available2010-09-17T10:10:46Z-
dc.date.issued2008en_HK
dc.identifier.citationFusion Engineering and Design, 2008, v. 83 n. 1, p. 112-116en_HK
dc.identifier.issn0920-3796en_HK
dc.identifier.urihttp://hdl.handle.net/10722/90947-
dc.description.abstractFabrication of Li2TiO3 pebbles by wet process received great attention for their convenience to realize mass production and good performances. Li2TiO3 pebbles with about 1.4 mm in diameter were prepared by a water-based sol-gel method using Ti(C4H9O)4 and LiNO3 as raw materials. This process is simple and has not been reported previously. Phase analysis, thermal analysis and morphological observation were carried out with the pebbles. The experimental results showed that a large amount of pores were presented on the surface of the pebbles and the density of the pebbles was sensitive to the sintering temperature. The pebbles sintered at 1200 °C for 10 h reached a density of ∼68%T.D. The shape of the pebbles was favorable with an average sphericity of about 1.08. © 2007 Elsevier B.V. All rights reserved.en_HK
dc.languageengen_HK
dc.publisherElsevier BV. The Journal's web site is located at http://www.elsevier.com/locate/fusengdesen_HK
dc.relation.ispartofFusion Engineering and Designen_HK
dc.subjectBreeder Materialen_HK
dc.subjectLithium Titanateen_HK
dc.subjectPebbleen_HK
dc.subjectSol-Gelen_HK
dc.titleFabrication of Li2TiO3 pebbles by water-based sol-gel methoden_HK
dc.typeArticleen_HK
dc.identifier.emailLin, B:blin@hku.hken_HK
dc.description.naturelink_to_subscribed_fulltext-
dc.identifier.doi10.1016/j.fusengdes.2007.09.005en_HK
dc.identifier.scopuseid_2-s2.0-37849041590en_HK
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-37849041590&selection=ref&src=s&origin=recordpageen_HK
dc.identifier.volume83en_HK
dc.identifier.issue1en_HK
dc.identifier.spage112en_HK
dc.identifier.epage116en_HK
dc.identifier.isiWOS:000253275500015-
dc.identifier.citeulike7574868-
dc.identifier.issnl0920-3796-

Export via OAI-PMH Interface in XML Formats

OR

Export to Other Non-XML Formats