File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Dielectric properties of three ceramic/epoxy composites

TitleDielectric properties of three ceramic/epoxy composites
Authors
KeywordsCeramics
Composite Materials
Dielectric Properties
Polymer
Issue Date2004
PublisherElsevier SA. The Journal's web site is located at http://www.elsevier.com/locate/matchemphys
Citation
Materials Chemistry and Physics, 2004, v. 85 n. 1, p. 201-206 How to Cite?
AbstractThree ceramic/epoxy composites were under investigation. The ceramic fillers include self-synthesized BaTiO3 and commercial BaTiO 3 and Pb(Mg1/3Nb2/3)O3. Effects of the filler ratio and testing temperature and frequency on the dielectric properties of these three composites were discussed. The self-synthesized BaTiO3/epoxy composite had the best dielectric property. Its 40%-filler composite had a dielectric constant of 44, which was higher than those of 27 and 24 for the commercial BaTiO3 and Pb(Mg 1/3Nb2/3)O3 composites, respectively. The large ceramic aggregates formed in epoxy are the reason for the self-synthesized BaTiO3/epoxy composite having a higher dielectric constant of 44. Composite dielectric constant was proportional to the volume ratio of the ceramic filler and remained constant at different test temperatures and frequencies. For the BaTiO3/epoxy composites, the fabrication process of slurry-casting or screen-printing can have an effect on their porosity. The composites with a low porosity lead to a low dielectric loss tangent. © 2004 Elsevier B.V. All rights reserved.
Persistent Identifierhttp://hdl.handle.net/10722/90833
ISSN
2015 Impact Factor: 2.101
2015 SCImago Journal Rankings: 0.733
ISI Accession Number ID
References

 

DC FieldValueLanguage
dc.contributor.authorKuo, D-Hen_HK
dc.contributor.authorChang, C-Cen_HK
dc.contributor.authorSu, T-Yen_HK
dc.contributor.authorWang, W-Ken_HK
dc.contributor.authorLin, B-Yen_HK
dc.date.accessioned2010-09-17T10:09:04Z-
dc.date.available2010-09-17T10:09:04Z-
dc.date.issued2004en_HK
dc.identifier.citationMaterials Chemistry and Physics, 2004, v. 85 n. 1, p. 201-206en_HK
dc.identifier.issn0254-0584en_HK
dc.identifier.urihttp://hdl.handle.net/10722/90833-
dc.description.abstractThree ceramic/epoxy composites were under investigation. The ceramic fillers include self-synthesized BaTiO3 and commercial BaTiO 3 and Pb(Mg1/3Nb2/3)O3. Effects of the filler ratio and testing temperature and frequency on the dielectric properties of these three composites were discussed. The self-synthesized BaTiO3/epoxy composite had the best dielectric property. Its 40%-filler composite had a dielectric constant of 44, which was higher than those of 27 and 24 for the commercial BaTiO3 and Pb(Mg 1/3Nb2/3)O3 composites, respectively. The large ceramic aggregates formed in epoxy are the reason for the self-synthesized BaTiO3/epoxy composite having a higher dielectric constant of 44. Composite dielectric constant was proportional to the volume ratio of the ceramic filler and remained constant at different test temperatures and frequencies. For the BaTiO3/epoxy composites, the fabrication process of slurry-casting or screen-printing can have an effect on their porosity. The composites with a low porosity lead to a low dielectric loss tangent. © 2004 Elsevier B.V. All rights reserved.en_HK
dc.languageengen_HK
dc.publisherElsevier SA. The Journal's web site is located at http://www.elsevier.com/locate/matchemphysen_HK
dc.relation.ispartofMaterials Chemistry and Physicsen_HK
dc.subjectCeramicsen_HK
dc.subjectComposite Materialsen_HK
dc.subjectDielectric Propertiesen_HK
dc.subjectPolymeren_HK
dc.titleDielectric properties of three ceramic/epoxy compositesen_HK
dc.typeArticleen_HK
dc.identifier.emailLin, B:blin@hku.hken_HK
dc.description.naturelink_to_subscribed_fulltext-
dc.identifier.doi10.1016/j.matchemphys.2004.01.003en_HK
dc.identifier.scopuseid_2-s2.0-1842588958en_HK
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-1842588958&selection=ref&src=s&origin=recordpageen_HK
dc.identifier.volume85en_HK
dc.identifier.issue1en_HK
dc.identifier.spage201en_HK
dc.identifier.epage206en_HK
dc.identifier.isiWOS:000221050900031-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats