File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Sorption and solubility of luting cements in different solutions

TitleSorption and solubility of luting cements in different solutions
Authors
Meşe, ABurrow, MFTyas, MJ
KeywordsChemicals And Cas Registry Numbers
Issue Date2008
Citation
Dental Materials Journal, 2008, v. 27 n. 5, p. 702-709 How to Cite?
DOI: http://dx.doi.org/10.4012/dmj.27.702
AbstractThis study examined the solubility, sorption, and dimensional change of eight luting cements in two different solutions: 50% ethanol:water and distilled water. Ten disk specimens were prepared of each material following the manufacturers' instructions, and then ground with silicone carbide paper. Sorption and solubility were calculated by weighing the specimens before and after immersion and desiccation. Data were analyzed by two-way ANOVA, Tukey's HSD and Fisher's PLSD tests. GC Fuji Plus and RelyX Luting2 showed the highest values of sorption and solubility both in water and ethanol:water. The percentage changes in volume for Maxcem, Nexus 2, Panavia F, RelyX Veneer, and VariolinkII were considerably smaller than for GC Fuji Plus, RelyX Luting2, and seT in both water and ethanol:water and after desiccation. Stability occurred within 2 weeks for all the eight materials when in water, while GC Fuji Plus, Maxcem, Panavia F and seT took 3 to 4 weeks to stabilize in ethanol:water.
Persistent Identifierhttp://hdl.handle.net/10722/90714
ISSN
0287-4547
2023 Impact Factor: 1.9
2023 SCImago Journal Rankings: 0.589
ISI Accession Number ID
WOS:000261139700009
References
References in Scopus

 

DC FieldValueLanguage
dc.contributor.authorMeşe, Aen_HK
dc.contributor.authorBurrow, MFen_HK
dc.contributor.authorTyas, MJen_HK
dc.date.accessioned2010-09-17T10:07:12Z-
dc.date.available2010-09-17T10:07:12Z-
dc.date.issued2008en_HK
dc.identifier.citationDental Materials Journal, 2008, v. 27 n. 5, p. 702-709en_HK
dc.identifier.issn0287-4547en_HK
dc.identifier.urihttp://hdl.handle.net/10722/90714-
dc.description.abstractThis study examined the solubility, sorption, and dimensional change of eight luting cements in two different solutions: 50% ethanol:water and distilled water. Ten disk specimens were prepared of each material following the manufacturers' instructions, and then ground with silicone carbide paper. Sorption and solubility were calculated by weighing the specimens before and after immersion and desiccation. Data were analyzed by two-way ANOVA, Tukey's HSD and Fisher's PLSD tests. GC Fuji Plus and RelyX Luting2 showed the highest values of sorption and solubility both in water and ethanol:water. The percentage changes in volume for Maxcem, Nexus 2, Panavia F, RelyX Veneer, and VariolinkII were considerably smaller than for GC Fuji Plus, RelyX Luting2, and seT in both water and ethanol:water and after desiccation. Stability occurred within 2 weeks for all the eight materials when in water, while GC Fuji Plus, Maxcem, Panavia F and seT took 3 to 4 weeks to stabilize in ethanol:water.en_HK
dc.languageengen_HK
dc.relation.ispartofDental Materials Journalen_HK
dc.subjectChemicals And Cas Registry Numbersen_HK
dc.subject.meshAbsorptionen_HK
dc.subject.meshAdsorptionen_HK
dc.subject.meshCarbon Compounds, Inorganic - chemistryen_HK
dc.subject.meshComposite Resins - chemistryen_HK
dc.subject.meshDental Cements - chemistryen_HK
dc.subject.meshDental Materials - chemistryen_HK
dc.subject.meshDesiccationen_HK
dc.subject.meshEthanol - chemistryen_HK
dc.subject.meshGlass - chemistryen_HK
dc.subject.meshGlass Ionomer Cements - chemistryen_HK
dc.subject.meshHumansen_HK
dc.subject.meshImmersionen_HK
dc.subject.meshMaterials Testingen_HK
dc.subject.meshResin Cements - chemistryen_HK
dc.subject.meshSilicon Compounds - chemistryen_HK
dc.subject.meshSilicon Dioxide - chemistryen_HK
dc.subject.meshSolubilityen_HK
dc.subject.meshSolvents - chemistryen_HK
dc.subject.meshSurface Propertiesen_HK
dc.subject.meshTime Factorsen_HK
dc.subject.meshWater - chemistryen_HK
dc.titleSorption and solubility of luting cements in different solutionsen_HK
dc.typeArticleen_HK
dc.identifier.emailBurrow, MF:mfburr58@hku.hken_HK
dc.identifier.authorityBurrow, MF=rp01306en_HK
dc.description.naturelink_to_subscribed_fulltext-
dc.identifier.doi10.4012/dmj.27.702en_HK
dc.identifier.pmid18972787-
dc.identifier.scopuseid_2-s2.0-54349121773en_HK
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-54349121773&selection=ref&src=s&origin=recordpageen_HK
dc.identifier.volume27en_HK
dc.identifier.issue5en_HK
dc.identifier.spage702en_HK
dc.identifier.epage709en_HK
dc.identifier.isiWOS:000261139700009-
dc.publisher.placeJapanen_HK
dc.identifier.scopusauthoridMeşe, A=35083931700en_HK
dc.identifier.scopusauthoridBurrow, MF=7005876730en_HK
dc.identifier.scopusauthoridTyas, MJ=35316181100en_HK
dc.identifier.issnl0287-4547-

Export via OAI-PMH Interface in XML Formats

OR

Export to Other Non-XML Formats