File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Tensile bond strength and curing gap formation of a dentin bonding resin.

TitleTensile bond strength and curing gap formation of a dentin bonding resin.
Authors
KeywordsChemicals And Cas Registry Numbers
Issue Date1993
Citation
Dental Materials Journal, 1993, v. 12 n. 2, p. 97-105 How to Cite?
AbstractTensile bond strength and contraction gap tests were carried out using a new dentin bonding resin in association with various dentin conditioning and priming materials in vitro. For the tensile bond test, significant differences were found between the nonconditioned and conditioned dentin, and the primed and non-primed dentin surfaces. The strongest bond was obtained using a combination of phosphoric acid conditioning and priming with HEMA in glutaraldehyde at 151.3 kgf/cm2. Gap test results showed the presence of gaps in all of the test groups, but with variation in the extent of gap formation. A not significant, inverse correlation was determined between the tensile bond strength and gap tests (R = -0.65). The new bonding resin obtained good bond strengths in all cases, but high bond strengths can only be obtained with a combination of etching and priming. Similarly, the smallest gaps were associated with the etched and primed groups.
Persistent Identifierhttp://hdl.handle.net/10722/90662
ISSN
2015 Impact Factor: 1.087
2015 SCImago Journal Rankings: 0.474

 

DC FieldValueLanguage
dc.contributor.authorBurrow, MFen_HK
dc.contributor.authorHayashida, Men_HK
dc.contributor.authorNegishi, Ten_HK
dc.contributor.authorNikaido, Ten_HK
dc.contributor.authorTagami, Jen_HK
dc.contributor.authorTakatsu, Ten_HK
dc.contributor.authorHosoda, Hen_HK
dc.date.accessioned2010-09-17T10:06:25Z-
dc.date.available2010-09-17T10:06:25Z-
dc.date.issued1993en_HK
dc.identifier.citationDental Materials Journal, 1993, v. 12 n. 2, p. 97-105en_HK
dc.identifier.issn0287-4547en_HK
dc.identifier.urihttp://hdl.handle.net/10722/90662-
dc.description.abstractTensile bond strength and contraction gap tests were carried out using a new dentin bonding resin in association with various dentin conditioning and priming materials in vitro. For the tensile bond test, significant differences were found between the nonconditioned and conditioned dentin, and the primed and non-primed dentin surfaces. The strongest bond was obtained using a combination of phosphoric acid conditioning and priming with HEMA in glutaraldehyde at 151.3 kgf/cm2. Gap test results showed the presence of gaps in all of the test groups, but with variation in the extent of gap formation. A not significant, inverse correlation was determined between the tensile bond strength and gap tests (R = -0.65). The new bonding resin obtained good bond strengths in all cases, but high bond strengths can only be obtained with a combination of etching and priming. Similarly, the smallest gaps were associated with the etched and primed groups.en_HK
dc.languageengen_HK
dc.relation.ispartofDental materials journalen_HK
dc.subjectChemicals And Cas Registry Numbersen_HK
dc.subject.meshAnimalsen_HK
dc.subject.meshCattleen_HK
dc.subject.meshDental Bondingen_HK
dc.subject.meshDental Cavity Preparationen_HK
dc.subject.meshDentin-Bonding Agents - chemistryen_HK
dc.subject.meshMaterials Testingen_HK
dc.subject.meshMethacrylates - chemistryen_HK
dc.subject.meshMicroscopy, Electron, Scanningen_HK
dc.subject.meshRegression Analysisen_HK
dc.subject.meshSurface Propertiesen_HK
dc.subject.meshTensile Strengthen_HK
dc.subject.meshTime Factorsen_HK
dc.titleTensile bond strength and curing gap formation of a dentin bonding resin.en_HK
dc.typeArticleen_HK
dc.identifier.emailBurrow, MF:mfburr58@hku.hken_HK
dc.identifier.authorityBurrow, MF=rp01306en_HK
dc.description.naturelink_to_subscribed_fulltext-
dc.identifier.pmid8004922-
dc.identifier.scopuseid_2-s2.0-0027868029en_HK
dc.identifier.volume12en_HK
dc.identifier.issue2en_HK
dc.identifier.spage97en_HK
dc.identifier.epage105en_HK
dc.publisher.placeJapanen_HK
dc.identifier.scopusauthoridBurrow, MF=7005876730en_HK
dc.identifier.scopusauthoridHayashida, M=7103406868en_HK
dc.identifier.scopusauthoridNegishi, T=36845863800en_HK
dc.identifier.scopusauthoridNikaido, T=7102059723en_HK
dc.identifier.scopusauthoridTagami, J=7005967527en_HK
dc.identifier.scopusauthoridTakatsu, T=35993686200en_HK
dc.identifier.scopusauthoridHosoda, H=7102404396en_HK

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats