File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: The influence of storage solution on dentin bond durability of resin cement

TitleThe influence of storage solution on dentin bond durability of resin cement
Authors
KeywordsChemicals And Cas Registry Numbers
Issue Date2000
PublisherElsevier Inc. The Journal's web site is located at http://www.elsevier.com/locate/dental
Citation
Dental Materials, 2000, v. 16 n. 1, p. 1-6 How to Cite?
AbstractObjectives: This study was conducted to determine the influence of storage solution on the bond durability of three resin cements to bovine dentin over the period of 1 year. Methods: Ten bovine dentin specimens were tested for shear bond strength with each material (Panavia21, Kuraray Co.; BISTITE, Tokuyama Co; MASA Bond, Sun Medical Co.) and storage mode, listed below. Four storage environments were studied as follows: water changed every day for 1 year; water unchanged for 1 year; Phosphate Buffered Saline (PBS) changed every week over 1 year; PBS unchanged for 1 year. Ten teeth were also tested for each material at 1 day as a control. The mode of failure was classified after fracture of the bonds by SEM observation. The means of the bond strengths were compared statistically by two-way ANOVA and Fisher's PLSD test (p < 0.05). Results for the mode of fracture were analyzed using the Mann-Whitney U test. Results: Although there was no statistical difference in the mean bond strengths between the water and PBS storage solutions (p > 0.05) in all cements, the results for the shear bond strengths in the changed storage solution groups were significantly lower than those where the storage solution remained unchanged (p < 0.05). There were statistical differences between the 1 day results and the changed water groups among all cements (p < 0.05). Significance: The storage condition influenced the long-term durability of dentin bonding with resin cements. ©2000 Academy of Dental Materials. Published by Elsevier Science Ltd. All rights reserved.
Persistent Identifierhttp://hdl.handle.net/10722/90604
ISSN
2015 Impact Factor: 3.931
2015 SCImago Journal Rankings: 1.339
ISI Accession Number ID
References

 

DC FieldValueLanguage
dc.contributor.authorKitasako, Yen_HK
dc.contributor.authorBurrow, MFen_HK
dc.contributor.authorNikaido, Ten_HK
dc.contributor.authorTagami, Jen_HK
dc.date.accessioned2010-09-17T10:05:33Z-
dc.date.available2010-09-17T10:05:33Z-
dc.date.issued2000en_HK
dc.identifier.citationDental Materials, 2000, v. 16 n. 1, p. 1-6en_HK
dc.identifier.issn0109-5641en_HK
dc.identifier.urihttp://hdl.handle.net/10722/90604-
dc.description.abstractObjectives: This study was conducted to determine the influence of storage solution on the bond durability of three resin cements to bovine dentin over the period of 1 year. Methods: Ten bovine dentin specimens were tested for shear bond strength with each material (Panavia21, Kuraray Co.; BISTITE, Tokuyama Co; MASA Bond, Sun Medical Co.) and storage mode, listed below. Four storage environments were studied as follows: water changed every day for 1 year; water unchanged for 1 year; Phosphate Buffered Saline (PBS) changed every week over 1 year; PBS unchanged for 1 year. Ten teeth were also tested for each material at 1 day as a control. The mode of failure was classified after fracture of the bonds by SEM observation. The means of the bond strengths were compared statistically by two-way ANOVA and Fisher's PLSD test (p < 0.05). Results for the mode of fracture were analyzed using the Mann-Whitney U test. Results: Although there was no statistical difference in the mean bond strengths between the water and PBS storage solutions (p > 0.05) in all cements, the results for the shear bond strengths in the changed storage solution groups were significantly lower than those where the storage solution remained unchanged (p < 0.05). There were statistical differences between the 1 day results and the changed water groups among all cements (p < 0.05). Significance: The storage condition influenced the long-term durability of dentin bonding with resin cements. ©2000 Academy of Dental Materials. Published by Elsevier Science Ltd. All rights reserved.en_HK
dc.languageengen_HK
dc.publisherElsevier Inc. The Journal's web site is located at http://www.elsevier.com/locate/dentalen_HK
dc.relation.ispartofDental Materialsen_HK
dc.subjectChemicals And Cas Registry Numbersen_HK
dc.subject.meshAdhesivenessen_HK
dc.subject.meshAnalysis of Varianceen_HK
dc.subject.meshAnimalsen_HK
dc.subject.meshCattleen_HK
dc.subject.meshDental Bondingen_HK
dc.subject.meshDentin-Bonding Agents - chemistryen_HK
dc.subject.meshDrug Storageen_HK
dc.subject.meshMaterials Testingen_HK
dc.subject.meshMicroscopy, Electron, Scanningen_HK
dc.subject.meshResin Cements - chemistryen_HK
dc.subject.meshSodium Chlorideen_HK
dc.subject.meshSolutions - chemistryen_HK
dc.subject.meshStatistics, Nonparametricen_HK
dc.subject.meshTensile Strengthen_HK
dc.subject.meshWateren_HK
dc.titleThe influence of storage solution on dentin bond durability of resin cementen_HK
dc.typeArticleen_HK
dc.identifier.emailBurrow, MF:mfburr58@hku.hken_HK
dc.identifier.authorityBurrow, MF=rp01306en_HK
dc.description.naturelink_to_subscribed_fulltext-
dc.identifier.pmid11203517-
dc.identifier.scopuseid_2-s2.0-0033754376en_HK
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-0033754376&selection=ref&src=s&origin=recordpageen_HK
dc.identifier.volume16en_HK
dc.identifier.issue1en_HK
dc.identifier.spage1en_HK
dc.identifier.epage6en_HK
dc.identifier.isiWOS:000085263000002-
dc.publisher.placeUnited Statesen_HK
dc.identifier.scopusauthoridKitasako, Y=7003435929en_HK
dc.identifier.scopusauthoridBurrow, MF=7005876730en_HK
dc.identifier.scopusauthoridNikaido, T=7102059723en_HK
dc.identifier.scopusauthoridTagami, J=7005967527en_HK

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats