File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Modeling of plasma spraying process to manufacture hybrid materials

TitleModeling of plasma spraying process to manufacture hybrid materials
Authors
KeywordsBehavior simulation
Hybrid layered manufacturing
Multiphase perfect material
Plasma spraying
Virtual manufacturing
Virtual prototyping
Issue Date2007
PublisherElsevier Ltd. The Journal's web site is located at http://www.elsevier.com/locate/cad
Citation
Cad Computer Aided Design, 2007, v. 39 n. 12, p. 1120-1133 How to Cite?
AbstractA component, which has an optimized combination of different materials in its different portions for a specific application, is considered as the component made of a multiphase perfect material. To fabricate such components, a hybrid layered manufacturing process was proposed and applies spraying, engraving, and refinishing technologies, among which the spraying step is the key technology for generating a coating of hybrid materials with their required volume fractions in every unit volume. To manufacture such a coating, it is important to study the spraying characteristics. This paper intends to establish the behavior model of plasma spraying, to implement the virtual manufacturing according to the behavior model, to analyze the volume fraction error of material constituents and to optimize the related technological parameters to eliminate the volume fraction error, thus providing the reliable basis for future real manufacturing. © 2007 Elsevier Ltd. All rights reserved.
Persistent Identifierhttp://hdl.handle.net/10722/76115
ISSN
2015 Impact Factor: 2.149
2015 SCImago Journal Rankings: 1.078
ISI Accession Number ID
References

 

DC FieldValueLanguage
dc.contributor.authorWang, Fen_HK
dc.contributor.authorChen, KZen_HK
dc.contributor.authorFeng, XAen_HK
dc.date.accessioned2010-09-06T07:17:47Z-
dc.date.available2010-09-06T07:17:47Z-
dc.date.issued2007en_HK
dc.identifier.citationCad Computer Aided Design, 2007, v. 39 n. 12, p. 1120-1133en_HK
dc.identifier.issn0010-4485en_HK
dc.identifier.urihttp://hdl.handle.net/10722/76115-
dc.description.abstractA component, which has an optimized combination of different materials in its different portions for a specific application, is considered as the component made of a multiphase perfect material. To fabricate such components, a hybrid layered manufacturing process was proposed and applies spraying, engraving, and refinishing technologies, among which the spraying step is the key technology for generating a coating of hybrid materials with their required volume fractions in every unit volume. To manufacture such a coating, it is important to study the spraying characteristics. This paper intends to establish the behavior model of plasma spraying, to implement the virtual manufacturing according to the behavior model, to analyze the volume fraction error of material constituents and to optimize the related technological parameters to eliminate the volume fraction error, thus providing the reliable basis for future real manufacturing. © 2007 Elsevier Ltd. All rights reserved.en_HK
dc.languageengen_HK
dc.publisherElsevier Ltd. The Journal's web site is located at http://www.elsevier.com/locate/caden_HK
dc.relation.ispartofCAD Computer Aided Designen_HK
dc.subjectBehavior simulationen_HK
dc.subjectHybrid layered manufacturingen_HK
dc.subjectMultiphase perfect materialen_HK
dc.subjectPlasma sprayingen_HK
dc.subjectVirtual manufacturingen_HK
dc.subjectVirtual prototypingen_HK
dc.titleModeling of plasma spraying process to manufacture hybrid materialsen_HK
dc.typeArticleen_HK
dc.identifier.openurlhttp://library.hku.hk:4550/resserv?sid=HKU:IR&issn=0010-4485&volume=39&spage=1120&epage=1133&date=2007&atitle=Modeling+of+plasma+spraying+process+to+manufacture+hybrid+materialsen_HK
dc.identifier.emailChen, KZ: kzchen188@gmail.comen_HK
dc.identifier.authorityChen, KZ=rp00097en_HK
dc.description.naturelink_to_subscribed_fulltext-
dc.identifier.doi10.1016/j.cad.2007.09.002en_HK
dc.identifier.scopuseid_2-s2.0-36448970901en_HK
dc.identifier.hkuros147755en_HK
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-36448970901&selection=ref&src=s&origin=recordpageen_HK
dc.identifier.volume39en_HK
dc.identifier.issue12en_HK
dc.identifier.spage1120en_HK
dc.identifier.epage1133en_HK
dc.identifier.isiWOS:000251953700008-
dc.publisher.placeUnited Kingdomen_HK
dc.identifier.scopusauthoridWang, F=7501312906en_HK
dc.identifier.scopusauthoridChen, KZ=7410237952en_HK
dc.identifier.scopusauthoridFeng, XA=7403047129en_HK

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats