File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: A new 4-node quadrilateral FE model with variable electrical degrees of freedom for the analysis of piezoelectric laminated composite plates

TitleA new 4-node quadrilateral FE model with variable electrical degrees of freedom for the analysis of piezoelectric laminated composite plates
Authors
KeywordsCTMQE
Finite element
First-order shear deformation theory
Laminated composite plate
Layerwise theory
Partial hybrid enhanced procedure
Piezoelectric
Issue Date2002
PublisherElsevier Ltd. The Journal's web site is located at http://www.elsevier.com/locate/compstruct
Citation
Composite Structures, 2002, v. 58 n. 4, p. 583-599 How to Cite?
AbstractA new 4-node quadrilateral finite element is developed for the analysis of laminated composite plates containing distributed piezoelectric layers (surface bonded or embedded). The mechanical part of the element formulation is based on the first-order shear deformation theory. The formulation is established by generalizing that of the high performance Mindlin plate element ARS-Q12, which was derived based on the DKQ element formulation and Timoshenko's beam theory. The layerwise linear theory is applied to deal with electric potential. Therefore, the number of electrical DOF is a variable depending on the number of plate sub-layers. Thus, there is no need to make any special assumptions with regards to the through-thickness variation of the electric potential, which is the true situation. Furthermore, a new "partial hybrid"-enhanced procedure is presented to improve the stresses solutions, especially for the calculation of transverse shear stresses. The proposed element, denoted as CTMQE, is free of shear locking and it exhibits excellent capability in the analysis of thin to moderately thick piezoelectric laminated composite plates. © 2002 Elsevier Science Ltd. All rights reserved.
Persistent Identifierhttp://hdl.handle.net/10722/75955
ISSN
2015 Impact Factor: 3.853
2015 SCImago Journal Rankings: 2.408
ISI Accession Number ID
References

 

DC FieldValueLanguage
dc.contributor.authorCen, Sen_HK
dc.contributor.authorSoh, AKen_HK
dc.contributor.authorLong, YQen_HK
dc.contributor.authorYao, ZHen_HK
dc.date.accessioned2010-09-06T07:16:11Z-
dc.date.available2010-09-06T07:16:11Z-
dc.date.issued2002en_HK
dc.identifier.citationComposite Structures, 2002, v. 58 n. 4, p. 583-599en_HK
dc.identifier.issn0263-8223en_HK
dc.identifier.urihttp://hdl.handle.net/10722/75955-
dc.description.abstractA new 4-node quadrilateral finite element is developed for the analysis of laminated composite plates containing distributed piezoelectric layers (surface bonded or embedded). The mechanical part of the element formulation is based on the first-order shear deformation theory. The formulation is established by generalizing that of the high performance Mindlin plate element ARS-Q12, which was derived based on the DKQ element formulation and Timoshenko's beam theory. The layerwise linear theory is applied to deal with electric potential. Therefore, the number of electrical DOF is a variable depending on the number of plate sub-layers. Thus, there is no need to make any special assumptions with regards to the through-thickness variation of the electric potential, which is the true situation. Furthermore, a new "partial hybrid"-enhanced procedure is presented to improve the stresses solutions, especially for the calculation of transverse shear stresses. The proposed element, denoted as CTMQE, is free of shear locking and it exhibits excellent capability in the analysis of thin to moderately thick piezoelectric laminated composite plates. © 2002 Elsevier Science Ltd. All rights reserved.en_HK
dc.languageengen_HK
dc.publisherElsevier Ltd. The Journal's web site is located at http://www.elsevier.com/locate/compstructen_HK
dc.relation.ispartofComposite Structuresen_HK
dc.rightsComposite Structures. Copyright © Elsevier Ltd.en_HK
dc.subjectCTMQEen_HK
dc.subjectFinite elementen_HK
dc.subjectFirst-order shear deformation theoryen_HK
dc.subjectLaminated composite plateen_HK
dc.subjectLayerwise theoryen_HK
dc.subjectPartial hybrid enhanced procedureen_HK
dc.subjectPiezoelectricen_HK
dc.titleA new 4-node quadrilateral FE model with variable electrical degrees of freedom for the analysis of piezoelectric laminated composite platesen_HK
dc.typeArticleen_HK
dc.identifier.openurlhttp://library.hku.hk:4550/resserv?sid=HKU:IR&issn=0263-8223&volume=58&issue=4&spage=583&epage=599&date=2002&atitle=A+new+4-node+quadrilateral+FE+model+with+variable+electrical+degrees+of+freedom+for+the+analysis+of+piezoelectric+laminated+composite+platesen_HK
dc.identifier.emailSoh, AK:aksoh@hkucc.hku.hken_HK
dc.identifier.authoritySoh, AK=rp00170en_HK
dc.description.naturelink_to_subscribed_fulltext-
dc.identifier.doi10.1016/S0263-8223(02)00167-8en_HK
dc.identifier.scopuseid_2-s2.0-0036896277en_HK
dc.identifier.hkuros78583en_HK
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-0036896277&selection=ref&src=s&origin=recordpageen_HK
dc.identifier.volume58en_HK
dc.identifier.issue4en_HK
dc.identifier.spage583en_HK
dc.identifier.epage599en_HK
dc.identifier.isiWOS:000179253300018-
dc.publisher.placeUnited Kingdomen_HK
dc.identifier.scopusauthoridCen, S=7004447496en_HK
dc.identifier.scopusauthoridSoh, AK=7006795203en_HK
dc.identifier.scopusauthoridLong, YQ=7203042914en_HK
dc.identifier.scopusauthoridYao, ZH=7401468036en_HK

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats