File Download
  Links for fulltext
     (May Require Subscription)
  • Find via Find It@HKUL
Supplementary

Article: Behavior modeling for the spraying device in the layered manufacturing process for the components made of a multiphase perfect material

TitleBehavior modeling for the spraying device in the layered manufacturing process for the components made of a multiphase perfect material
Authors
KeywordsBehavior modeling
Spraying device
Layer manufacturing
Issue Date2006
PublisherCentral University of Technology, Free State. The Journal's web site is located at http://www.cut.ac.za/jngs/
Citation
Journal for New Generation Science, 2006, v. 4 n. 1, p. 8-20 How to Cite?
AbstractA component, which has a perfect combination of different materials (probably including homogeneous materials and three different types of heterogeneous materials) in its different portions for a specific application, is considered as the component made of a multiphase perfect material. To fabricate such components, a hybrid layered manufacturing process has been developed. In order to accurately spray different materials with their required volume fractions for every pixel during fabrication, it is important to investigate its spraying operation. This paper establishes the behavior model of the spraying device and proves its validity using digital simulations.
Persistent Identifierhttp://hdl.handle.net/10722/75881
ISSN

 

DC FieldValueLanguage
dc.contributor.authorChen, KZ-
dc.contributor.authorWang, F-
dc.contributor.authorFeng, XY-
dc.contributor.authorFeng, XA-
dc.date.accessioned2010-09-06T07:15:29Z-
dc.date.available2010-09-06T07:15:29Z-
dc.date.issued2006-
dc.identifier.citationJournal for New Generation Science, 2006, v. 4 n. 1, p. 8-20-
dc.identifier.issn1684-4998-
dc.identifier.urihttp://hdl.handle.net/10722/75881-
dc.description.abstractA component, which has a perfect combination of different materials (probably including homogeneous materials and three different types of heterogeneous materials) in its different portions for a specific application, is considered as the component made of a multiphase perfect material. To fabricate such components, a hybrid layered manufacturing process has been developed. In order to accurately spray different materials with their required volume fractions for every pixel during fabrication, it is important to investigate its spraying operation. This paper establishes the behavior model of the spraying device and proves its validity using digital simulations.-
dc.languageeng-
dc.publisherCentral University of Technology, Free State. The Journal's web site is located at http://www.cut.ac.za/jngs/-
dc.relation.ispartofJournal for New Generation Science-
dc.rightsCreative Commons: Attribution 3.0 Hong Kong License-
dc.subjectBehavior modeling-
dc.subjectSpraying device-
dc.subjectLayer manufacturing-
dc.titleBehavior modeling for the spraying device in the layered manufacturing process for the components made of a multiphase perfect material-
dc.typeArticle-
dc.identifier.emailChen, KZ: kzchen@hkucc.hku.hk-
dc.identifier.authorityChen, KZ=rp00097-
dc.description.naturepublished_or_final_version-
dc.identifier.hkuros131650-
dc.identifier.volume4-
dc.identifier.issue1-
dc.identifier.spage8-
dc.identifier.epage20-
dc.publisher.placeSouth Africa-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats