File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Developing a knowledge-based injection mould cost estimation system by decision tables

TitleDeveloping a knowledge-based injection mould cost estimation system by decision tables
Authors
Chin, KSWong, TN
KeywordsDecision table
Injection mould
Mould cost estimation
Issue Date1996
PublisherSpringer U K. The Journal's web site is located at http://www.springer.com/engineering/production+eng/journal/170
Citation
International Journal Of Advanced Manufacturing Technology, 1996, v. 11 n. 5, p. 353-365 How to Cite?
AbstractThis paper presents a knowledge-based costing system (DTMOLD-1) for an electrical appliance manufacturer to assist mould cost estimation at the early design stage. The system is developed in the form of decision tables. Through the use of decision tables, numerous interrelated variables and technical data in the injection mould cost estimation process are organised and presented. When the features of a plastic part are input, the DTMOLD-1 will generate an estimated cost of the injection mould required to produce the part. The rationale behind the system as well as the methodologies used in the developmental process are discussed.
Persistent Identifierhttp://hdl.handle.net/10722/74227
ISSN
0268-3768
2023 Impact Factor: 2.9
2023 SCImago Journal Rankings: 0.696
ISI Accession Number ID
WOS:A1996UN40000006
References
References in Scopus

 

DC FieldValueLanguage
dc.contributor.authorChin, KSen_HK
dc.contributor.authorWong, TNen_HK
dc.date.accessioned2010-09-06T06:59:13Z-
dc.date.available2010-09-06T06:59:13Z-
dc.date.issued1996en_HK
dc.identifier.citationInternational Journal Of Advanced Manufacturing Technology, 1996, v. 11 n. 5, p. 353-365en_HK
dc.identifier.issn0268-3768en_HK
dc.identifier.urihttp://hdl.handle.net/10722/74227-
dc.description.abstractThis paper presents a knowledge-based costing system (DTMOLD-1) for an electrical appliance manufacturer to assist mould cost estimation at the early design stage. The system is developed in the form of decision tables. Through the use of decision tables, numerous interrelated variables and technical data in the injection mould cost estimation process are organised and presented. When the features of a plastic part are input, the DTMOLD-1 will generate an estimated cost of the injection mould required to produce the part. The rationale behind the system as well as the methodologies used in the developmental process are discussed.en_HK
dc.languageengen_HK
dc.publisherSpringer U K. The Journal's web site is located at http://www.springer.com/engineering/production+eng/journal/170en_HK
dc.relation.ispartofInternational Journal of Advanced Manufacturing Technologyen_HK
dc.subjectDecision tableen_HK
dc.subjectInjection moulden_HK
dc.subjectMould cost estimationen_HK
dc.titleDeveloping a knowledge-based injection mould cost estimation system by decision tablesen_HK
dc.typeArticleen_HK
dc.identifier.openurlhttp://library.hku.hk:4550/resserv?sid=HKU:IR&issn=0268-3768&volume=11&spage=353&epage=364&date=1996&atitle=Developing+a+knowledge-based+injection+mould+cost+estimation+system+by+decision+tablesen_HK
dc.identifier.emailWong, TN: tnwong@hku.hken_HK
dc.identifier.authorityWong, TN=rp00192en_HK
dc.description.naturelink_to_subscribed_fulltext-
dc.identifier.scopuseid_2-s2.0-0029659072en_HK
dc.identifier.hkuros14482en_HK
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-0029659072&selection=ref&src=s&origin=recordpageen_HK
dc.identifier.volume11en_HK
dc.identifier.issue5en_HK
dc.identifier.spage353en_HK
dc.identifier.epage365en_HK
dc.identifier.isiWOS:A1996UN40000006-
dc.publisher.placeUnited Kingdomen_HK
dc.identifier.scopusauthoridChin, KS=7202995439en_HK
dc.identifier.scopusauthoridWong, TN=55301015400en_HK
dc.identifier.issnl0268-3768-

Export via OAI-PMH Interface in XML Formats

OR

Export to Other Non-XML Formats