File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Shape recovery from turntable sequence using rim reconstruction

TitleShape recovery from turntable sequence using rim reconstruction
Authors
KeywordsCircular motion
Rim reconstruction
Silhouette
Surface extraction
Issue Date2008
PublisherElsevier BV. The Journal's web site is located at http://www.elsevier.com/locate/pr
Citation
Pattern Recognition, 2008, v. 41 n. 11, p. 3295-3301 How to Cite?
AbstractThis paper makes use of both feature points and silhouettes to deliver fast 3D shape recovery. The algorithm exploits object silhouettes in two views to establish a 3D rim curve, which is defined with respect to the two frontier points arising from two views. The images of this 3D rim curve in the two views are matched using cross-correlation technique. A 3D planar rim curve is then reconstructed using point-based reconstruction method. A set of 3D rim curves enclosing the object can be obtained from an image sequence captured under circular motion. Silhouettes are further utilized to check for mismatched rim points. The proposed method solves the problem of reconstruction of concave object surface, which is usually left unresolved in general silhouette-based reconstruction methods. In addition, the property of the reconstructed 3D rim curves allows fast surface extraction. Experimental results with real data are presented. © 2008 Elsevier Ltd. All rights reserved.
Persistent Identifierhttp://hdl.handle.net/10722/58855
ISSN
2015 Impact Factor: 3.399
2015 SCImago Journal Rankings: 2.051
ISI Accession Number ID
Funding AgencyGrant Number
Hong Kong Special Administrative Region, ChinaHKU7135/05E
CRCG of the University of Hong Kong
Funding Information:

The authors would like to thank the reviewers for constructive comments that helped to improve the paper in many respects. The work described in this paper was supported by the Research Grants Council of Hong Kong Special Administrative Region, China (Project HKU7135/05E) and CRCG of the University of Hong Kong.

References

 

DC FieldValueLanguage
dc.contributor.authorZhong, Hen_HK
dc.contributor.authorLau, WSen_HK
dc.contributor.authorSze, WFen_HK
dc.contributor.authorHung, YSen_HK
dc.date.accessioned2010-05-31T03:38:05Z-
dc.date.available2010-05-31T03:38:05Z-
dc.date.issued2008en_HK
dc.identifier.citationPattern Recognition, 2008, v. 41 n. 11, p. 3295-3301en_HK
dc.identifier.issn0031-3203en_HK
dc.identifier.urihttp://hdl.handle.net/10722/58855-
dc.description.abstractThis paper makes use of both feature points and silhouettes to deliver fast 3D shape recovery. The algorithm exploits object silhouettes in two views to establish a 3D rim curve, which is defined with respect to the two frontier points arising from two views. The images of this 3D rim curve in the two views are matched using cross-correlation technique. A 3D planar rim curve is then reconstructed using point-based reconstruction method. A set of 3D rim curves enclosing the object can be obtained from an image sequence captured under circular motion. Silhouettes are further utilized to check for mismatched rim points. The proposed method solves the problem of reconstruction of concave object surface, which is usually left unresolved in general silhouette-based reconstruction methods. In addition, the property of the reconstructed 3D rim curves allows fast surface extraction. Experimental results with real data are presented. © 2008 Elsevier Ltd. All rights reserved.en_HK
dc.languageengen_HK
dc.publisherElsevier BV. The Journal's web site is located at http://www.elsevier.com/locate/pren_HK
dc.relation.ispartofPattern Recognitionen_HK
dc.subjectCircular motionen_HK
dc.subjectRim reconstructionen_HK
dc.subjectSilhouetteen_HK
dc.subjectSurface extractionen_HK
dc.titleShape recovery from turntable sequence using rim reconstructionen_HK
dc.typeArticleen_HK
dc.identifier.openurlhttp://library.hku.hk:4550/resserv?sid=HKU:IR&issn=0031-3203&volume=41, No.11&spage=3295&epage=3301&date=2008&atitle=Shape+recovery+from+turntable+sequence+using+rim+reconstructionen_HK
dc.identifier.emailHung, YS:yshung@eee.hku.hken_HK
dc.identifier.authorityHung, YS=rp00220en_HK
dc.description.naturelink_to_subscribed_fulltext-
dc.identifier.doi10.1016/j.patcog.2008.05.017en_HK
dc.identifier.scopuseid_2-s2.0-48149115684en_HK
dc.identifier.hkuros163897en_HK
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-48149115684&selection=ref&src=s&origin=recordpageen_HK
dc.identifier.volume41en_HK
dc.identifier.issue11en_HK
dc.identifier.spage3295en_HK
dc.identifier.epage3301en_HK
dc.identifier.isiWOS:000258817800003-
dc.publisher.placeNetherlandsen_HK
dc.identifier.scopusauthoridZhong, H=16178741200en_HK
dc.identifier.scopusauthoridLau, WS=36847553500en_HK
dc.identifier.scopusauthoridSze, WF=12804326800en_HK
dc.identifier.scopusauthoridHung, YS=8091656200en_HK
dc.identifier.citeulike3393482-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats