File Download
Supplementary

Book: Proceedings of the International Conference on Manufacturing Automation, April 28-30, 1997, Hong Kong

TitleProceedings of the International Conference on Manufacturing Automation, April 28-30, 1997, Hong Kong
Authors
Other Contributors
Issue Date1997
Publisher[Dept. of Mechanical Engineering, University of Hong Kong]
DescriptionIncludes bibliographical references and index.
Organized by the Dept. of Mechanical Engineering, University of Hong Kong.
SubjectConferences held in Hong Kong -- Manufacturing processes
Manufactures -- Automation.
Manufacturing processes -- Automation.
Mechanical engineering -- Congresses.
Production engineering -- Congresses.
Persistent Identifierhttp://hdl.handle.net/10722/54881
ISBN

 

DC FieldValueLanguage
dc.contributor.authorGibson, I.en_HK
dc.contributor.authorTan, S. T.en_HK
dc.contributor.authorWong, T. N.en_HK
dc.contributor.otherUniversity of Hong Kong. Dept. of Mechanical Engineering.en_HK
dc.date.accessioned2009-07-03T04:09:04Z-
dc.date.available2009-07-03T04:09:04Z-
dc.date.issued1997en_HK
dc.identifier.isbn9628513818en_HK
dc.identifier.isbn9628513826en_HK
dc.identifier.isbn9628513834en_HK
dc.identifier.otherocm51376713en_HK
dc.identifier.urihttp://hdl.handle.net/10722/54881-
dc.descriptionIncludes bibliographical references and index.en_HK
dc.descriptionOrganized by the Dept. of Mechanical Engineering, University of Hong Kong.en_HK
dc.description.tableofcontentsForeword Tan, S.T. Tan, S.T. Ien_HK
dc.description.tableofcontentsv.2 Author/session/page index IIen_HK
dc.description.tableofcontentsv.1 Worldwide trends in rapid prototyping Wohlers, Terry T. Wohlers, Terry T. 1en_HK
dc.description.tableofcontentsv.1 Responsiveness of machining environments Gindy, N.N. Gindy, N.N. Saad, S.M. Saad, S.M. 9en_HK
dc.description.tableofcontentsv.1 The 21st century manufacturing automation and the social impact Kunii, Tosiyasu L. Kunii, Tosiyasu L. 21en_HK
dc.description.tableofcontentsv.1 The current state of affairs in dimensional tolerancing: 1997a Voelcker, Herbert B. Voelcker, Herbert B. 30en_HK
dc.description.tableofcontentsv.1 Application of a collaborative CAD on interactive remote coediting Kao, Y.C. Kao, Y.C. Lin, Grier C.I. Lin, Grier C.I. 44en_HK
dc.description.tableofcontentsv.1 Intelligent packing design on assembly model Huang, G.P. Huang, G.P. Zhou, J. Zhou, J. Yu, Q. Yu, Q. Wang, C.H. Wang, C.H. Yuan, M.L. Yuan, M.L. 50en_HK
dc.description.tableofcontentsv.1 Computer aided engineering system for cylindrical gearing Li, Rungfang Li, Rungfang Lin, Tengjiao Lin, Tengjiao Lin, Chao Lin, Chao Tang, Qian Tang, Qian Chen, Bingkui Chen, Bingkui 56en_HK
dc.description.tableofcontentsv.1 Parametric geometry modelling based on an extended hypergraphy Meng, Xiangxu Meng. Xiangxu Li, Xueqing Li, Xueqing Gongbin Gongbin Wang, Jiaye Wang, Jiaye Liu, Shenquan Liu, Shenquan 60en_HK
dc.description.tableofcontentsv.1 Isometric transformation between 2D and 3D surfaces Wu, Z. Wu, Z. Yuen, M.M.F. Yuen, M.M.F. 66en_HK
dc.description.tableofcontentsv.2 An application of spline surface interpolation on blending/polishing system for turbine blade Wang, Jia-ye Wang, Jia-ye Lee, Eng-wah Lee, Eng-wah Shi, Cheng-fu Shi, Cheng-fu Liu, Pei-ling Liu, Pei-ling 1114en_HK
dc.description.tableofcontentsv.2 Intelligent synthesis of multiagent manufacturing systems Szczerbicki, Edward Szczerbicki, Edward 1119en_HK
dc.description.tableofcontentsv.2 Intelligent decision support system for equipment diagnosis and maintenan4ce management Tu, Yiliu Tu, Yiliu Zhang, Jun Zhang, Jun Yeung, Eddie H.H. Yeung, Eddie H.H. 1125en_HK
dc.description.tableofcontentsv.2 Application of neural-network for effecting a knowledgeable manufacturing system in reaming Mathews, P.G. Mathews, P.G. Shunmugam, M.S. Shunmugam, M.S. 1131en_HK
dc.description.tableofcontentsv.2 Object oriented simulation of relay ladder logic Ferreira, J.A. Ferreira, J.A. Azevedo, J.L. Azevedo, J.L. Estima De Oliveira, J.P. Estima De Oliveira, J.P. 1137en_HK
dc.description.tableofcontentsv.2 Designing automated reasoners with efficient algorithms Guan, J.W. Guan, J.W. Bell, D.A. Bell, D.A. 1143en_HK
dc.description.tableofcontentsv.2 A distributed algorithm for the simulation of temperature distribution in metal cutting Lai, C.H. Lai, C.H. Law, S. Law, S. 1149en_HK
dc.description.tableofcontentsv.2 Fuzzy self organizing control for contouring performance improvement of CNC machine tools Cheng, J. John Cheng, J. John Kong, Tom Kong, Tom Yang, Daniel C.H. Yang, Daniel C.H. 1155en_HK
dc.description.tableofcontentsv.2 Swept volume approach as an integral part of 5-axis NC machining CAD/CAM systems Wang, L.P. Wang, L.P. Leu, M.C. Leu, M.C. Blackmore, D. Blackmore, D. 1161en_HK
dc.description.tableofcontentsv.1 Early stage rapid feedback design system based on rapid prototype technology Lu, Qingping Lu, Qingping Li, Bao Li, Bao Wang, Jianguo Wang, Jianguo Zhu, Jun Zhu, Jun Yan, Yongnian Yan, Yongnian 122en_HK
dc.description.tableofcontentsv.2 Artificial neural networks for performance estimation in wood turning Karri, V. Karri, V. 618en_HK
dc.description.tableofcontentsv.2 Kinematics analysis of general 5-axis NC milling machines and its application to NC machining Wang, L.P. Wang, L.P. Leu, M.C. Leu, M.C. Blackmore, D. Blackmore, D. 1167en_HK
dc.description.tableofcontentsv.2 Computer aided assembly planning and process modelling Gao, J.X. Gao, J.X. Ip, A. Ip, A. 1173en_HK
dc.description.tableofcontentsv.2 A clustering algorithm for automated inspection Ajmal, A. Ajmal, A. Zhang, S.G. Zhang, S.G. 1179en_HK
dc.description.tableofcontentsv.2 A toolpath and cutting depth algorithm for rough machining Hu, Y.N. Hu, Y.N. Tse, W.C. Tse, W.C. Chen, Y.H. Chen, Y.H. 1185en_HK
dc.description.tableofcontentsv.2 A product family approach to assembly process planning for electronics products Fan, L.S. Fan, L.S. Liu, C.K. Liu, C.K. 1191en_HK
dc.description.tableofcontentsv.2 Neural network CAPP system modeling Chen, Bingkui Chen, Bingkui Wang, Dehua Wang, Dehua Lin, Tangjiao Lin, Tengjiao 1197en_HK
dc.description.tableofcontentsv.2 An optimal expected-time algorithm for voronoi diagram of disjoint polygonal objects Wang, Jia-ye Wang, Jia-ye Wang, Wenping Wang, Wenping Liu, Ding-yuin Liu, Ding-yuin 1201en_HK
dc.description.tableofcontentsv.2 The benefits of coherent exploitation in CSG rendering algorithm Kurdthongmee, W. Kurdthongmee, W. 1207en_HK
dc.description.tableofcontentsv.2 Smooth surface interpolation of irregular meshes Wang, Xuefu Wang, Xuefu Cheng, Fuhua(Frank) Cheng, Fuhua(Frank) 1213en_HK
dc.description.tableofcontentsv.2 New curves and surfaces comparing favourably with bezier curves and surfaces in computer-aided geometry design Cao, J.D. Cao, J.D. 1219en_HK
dc.description.tableofcontentsv.2 Multi-modelling: a help to rapid product development Gardan, Yvon Gardan, Yvon 623en_HK
dc.description.tableofcontentsv.1 An on-line calibration methodology for robot relative positioning inaccuracy Lu, Tien-fu Lu, Tien-fu Lin, Grier C.I. Lin, Grier C.I. 128en_HK
dc.description.tableofcontentsv.1 Force control using virtual trajectory generation Fielding, T. Fielding, T. Mills, J.K. Mills, J.K. 134en_HK
dc.description.tableofcontentsv.1 Payload alignment control using task moment feedback for multi-robot assembly operation Laliberte, M. Laliberte, M. Mills, J.K. Mills, J.K. 140en_HK
dc.description.tableofcontentsv.1 Shape glass cutting direct drive robot Chen, Hui- tang Chen, Hui-tang Jiang, Ping Jiang, Ping Wang, Yue- juan Wang, Yue-juan 146en_HK
dc.description.tableofcontentsv.1 Step based semantic product model Luo, Yan Luo, Yan Zhou, Xinjian Zhou, Xinjian Mo, Ming Mo, Ming 152en_HK
dc.description.tableofcontentsv.1 Assembly modeling of product information based on self-organization Tan, Jianrong Tan, Jianrong Wei, Xiuting Wei, Xiuting Huang, Chao Huang, Chao 158en_HK
dc.description.tableofcontentsv.1 A universal geometric interface implemented with structured language Xu, Shixin Xu, Shixin Cai, Hegao Cai, Hegao Wang, Yongjie Wang, Yongjie 164en_HK
dc.description.tableofcontentsv.1 Build integrated CAD/CAM system based on software reverse engineering Lu, Yiping Lu, Yiping Lin, Jianping Lin, Jianping 170en_HK
dc.description.tableofcontentsv.1 Design and development of material management system in CIMs of iron & steel complex Tang, Zhiwen Tang, Zhiwen Wang, Dingwei Wang, Dingwei 176en_HK
dc.description.tableofcontentsv.1 Monitoring behavioral evolution for manual assembly system using object petri nets in CIM environment Wu, F. Wu, F. Liu, W.H. Liu, W.H. Xiao, T.Y. Xiao, T.Y. 182en_HK
dc.description.tableofcontentsv.2 On development a flexible fixture for planar objects Lin, G.C.I. Lin, G.C.I. Du, H. Du, H. 629en_HK
dc.description.tableofcontentsv.1 A taxonomy for interactive and blackboard based CAPP Van Zeir, G. Van Zeir, G. Kruth, J.P. Kruth, J.P. Detand, J. Detand, J. 188en_HK
dc.description.tableofcontentsv.1 Smart drilling - a fuzzy decision system for planning drilling operations Ma, Mattew Jia Ma, Mattew Jia Du, R. Du, R. 196en_HK
dc.description.tableofcontentsv.1 Tolerancing, tool adjustment and machining parameter selection problems in multi-pass turning operation Liang, M. Liang, M. Zuo, M. Zuo, M. Yeap, T. Yeap, T. 202en_HK
dc.description.tableofcontentsv.1 Three-valued calculi in the problem of conversion from CSG to boundary models Gorelik, A.G. Gorelik, A.G. 208en_HK
dc.description.tableofcontentsv.1 ... refinement of data for rapid prototyping Walton, D.J. Walton, D.J. Yeung, M. Yeung, M. 214en_HK
dc.description.tableofcontentsv.1 The boolean operation of polygon with holes based on edge recognition Wu, Yunxing Wu, Yunxing Du, Mike Du, Mike Liu, Shiping Liu, Shiping 220en_HK
dc.description.tableofcontentsv.1 Implication of design for inspection Wang, L. Wang, L. Lin, G.C.I. Lin, G.C.I. 225en_HK
dc.description.tableofcontentsv.1 A neural network approach to parametric design Chen, Y.H. Chen, Y.H. 231en_HK
dc.description.tableofcontentsv.1 Element method for 2-D shape transformation Hui, K.C. Hui, K.C. Li, Y.D. Li, Y.D. 237en_HK
dc.description.tableofcontentsv.1 Interacting with a virtually elastic object Hui, K.C. Hui, K.C. Ma, M.C. Ma, M.C. 243en_HK
dc.description.tableofcontentsv.2 Automated correction of shape errors in manufacturing processes Van Den Berg, Bert Van Den Berg, Bert 635en_HK
dc.description.tableofcontentsv.1 2D boundary recovery based on medial axis transform Hu, Yujin Hu, Yujin Yuen, M.M.F. Yuen, M.M.F. Zhou, Ji Zhou, Ji 249en_HK
dc.description.tableofcontentsv.1 System of cost control and analysis decision support under CIMS circumstance Xu, Baodong Xu, Baodong Gao, Bin Gao, Bin Chang, Jiazhong Chang, Jiazhong Xu, Bo Xu, Bo 255en_HK
dc.description.tableofcontentsv.1 Product data management system Xue, Hongyuan Xue, Hongyuan Zhou, Ji Zhou, Ji Zhong, Yifang Zhong, Yifang 260en_HK
dc.description.tableofcontentsv.1 Prototyping tool for flexible manufacturing systems Dalila, Boudebous Dalila, Boudebous 266en_HK
dc.description.tableofcontentsv.1 Reference models as an approach for the construction of flexible production planning and control systems Danglmaier, W. Dangelmaier, W. Kuhn, A. Kuhn, A. Langemann, T. Langemann, T. 272en_HK
dc.description.tableofcontentsv.1 A task-centred methodology to support an integrated and open computer aided manufacturing systems design environment Wu, B. Wu, B. Hull, R.S. Hull, R.S. 278en_HK
dc.description.tableofcontentsv.1 Study of rapid intelligent tooling system based on RPM technology Du, Zhaohui Du, Zhaohui Zhang, Renji Zhang, Renji Yan, Yongnian Yan, Yongnian 284en_HK
dc.description.tableofcontentsv.1 The application of hot melt adhesive to laminated object manufacuturing Zhang, Xianglin Zhang, Xianglin Huang, Jin Huang, Jin Li, Yan Li, Yan Huang, Shuhuai Huang, Shuhuai 290en_HK
dc.description.tableofcontentsv.1 Internal company use of rapid prototyping and 3D- digitizing in the engineering design process Birke, C. Birke, C. Beyer, C. Beyer, C. Grote, K.H. Grote, K.H. 294en_HK
dc.description.tableofcontentsv.1 A computation efficient slicing algorithm for rapid prototyping Choi, S.H. Choi, S.H. 300en_HK
dc.description.tableofcontentsv.2 A study on an integrated CNC system for tool grinding Zhou, Yanhong Zhou, Yanhong Li, Jian Li, Jian Wang, Chenpei Wang, Chenpei Zhou, Ji Zhou, Ji 641en_HK
dc.description.tableofcontentsv.1 Rapid product development using a RP-centered interactive design process Wu, Hsien-jung Wu, Hsien-jung 306en_HK
dc.description.tableofcontentsv.1 A path planning algorithm for robot manipulators in FMS environment Ma, Yulin Ma, Yulin Wang, Wei Wang, Wei Fu, Yili Fu, Yili 311en_HK
dc.description.tableofcontentsv.1 Model and sensor based control of industrial robots Madsen, Ole Madsen, Ole Holm, Hans Holm, Hans 317en_HK
dc.description.tableofcontentsv.1 A formal method to specify at an abstract level robotics-based manufacturing systems Condom, J.M. Condom, J.M. Ouriachi, K. Ouriachi, K. 323en_HK
dc.description.tableofcontentsv.1 A sophisticated assembly planning system for flexible robot-based manufacturing Mosemann, H. Mosemann, H. Rohrdanz, F. Rohrdanz, F. Wahl, F.M. Wahl, F.M. 329en_HK
dc.description.tableofcontentsv.1 State space modelleing of a class of discrete event systems for robotic manufacturing control Holm, Hans Holm, Hans 335en_HK
dc.description.tableofcontentsv.1 Function and behaviour description in intelligent mechanical CAD system Li, C.L. Li, C.L. Tan, S.T. Tan, S.T. Chan, K.W. Chan, K.W. 341en_HK
dc.description.tableofcontentsv.1 Dimension-driven parameterized design of free form shapes Yu, Kai-ming Yu, Kai-ming Zhu, Wei-ming Zhu, Wei-ming 347en_HK
dc.description.tableofcontentsv.1 Petri net aided tolerancing for prismatic components Eshwaraiah, P. Eshwaraiah, P. Sarat Babu, A.L. Sarat Babu, A.L. Ravi Raju, K. Ravi Raju, K. Tewari, N.K. Tewari, N.K. 353en_HK
dc.description.tableofcontentsv.1 Automatic mesh generation for simplification of finite element analysis Fukuda, Junko Fukuda, Junko 360en_HK
dc.description.tableofcontentsv.2 A general implementable approach to distributed problem solving system Wei, Baogang Wei, Baogang Qin, Zheng Qin, Zheng Kang, Jichang Kang, Jichang He, Huacan He, Huacan 647en_HK
dc.description.tableofcontentsv.1 Design at a distance Medland, A.J. Medland, A.J. 366en_HK
dc.description.tableofcontentsv.1 A tolerance model with surface irregularity consideration Lui, C.K. Lui, C.K. Sze, W.S. Sze, W.S. Tan, S.T. Tan, S.T. 374en_HK
dc.description.tableofcontentsv.1 On the assemblability of a product Hsu, Hung-yao Hsu, Hung-yao Lin, Grier C.I. Lin, Grier C.I. 383en_HK
dc.description.tableofcontentsv.1 Software prototyping and object-oriented specification as a methodology for customer-oriented development of software systems - an example from the automative industry Mertins, K. Mertins, K. Albrecht, R. Albrecht, R. Beck, S. Beck, S. Bahna, O. Bahna, O. La Pierre, B. La Pierre, B. 389en_HK
dc.description.tableofcontentsv.1 Improvement of the planning quality in highly networked processing industry production by means of simulation and cooperative local control stations Pirron, J. Pirron, J. Arnold, J. Arnold, J. Reisch, O. Reisch, O. 395en_HK
dc.description.tableofcontentsv.1 An Alternative concept to MAPII for mass customization based on the object-oriented paradigm Rautenstrauch, Claus Rautenstrauch, Claus 401en_HK
dc.description.tableofcontentsv.1 Simulation for evaluation of scheduling rules in flexible manufacturing systems Chan, F.T.S. Chan, F.T.S. Ip, R.W.L. Ip, R.W.L. 407en_HK
dc.description.tableofcontentsv.1 Shop-floor scheduling and data capturing system for Autonomous Manufacturing Island Lam, F.W. Lam, F.W. Ma, Y.J. Ma, Y.J. Lee, W.B. Lee, W.B. Zhang, S. Zhang, S. 414en_HK
dc.description.tableofcontentsv.1 Rapid prototyping of golf clubs Jones, R. Jones, R. Mitchell, S.R. Mitchell, S.R. 420en_HK
dc.description.tableofcontentsv.1 An approach on decision support for selection of process chains of the tool and die making industry under special consideration of rapid prototyping technologies Durr, H. Durr, H. Kaschka, U. Kaschka, U. 426en_HK
dc.description.tableofcontentsv.2 A new approach to software development in concurrent engineering Yan, Jianxin Yan, Jianxin Mai, Chungfan Mai, Changfan Ming, Tang Ming, Tang 652en_HK
dc.description.tableofcontentsv.1 Feature based optimization of part orientation for rapid prototyping Ng, Micky W.M. Ng, Micky W.M. Tan, S.T. Tan, S.T. 434en_HK
dc.description.tableofcontentsv.1 Rapid prototyping using robot welding - process description Ribeiro, Fernando Ribeiro, Fernando Norrish, John Norrish, John 443en_HK
dc.description.tableofcontentsv.1 An extended slicing method for rapid prototyping Lee, Kwan H. Lee, Kwan H. Yoo, Il-sang Yoo, Il-sang 449en_HK
dc.description.tableofcontentsv.1 Rapid prototyping on a large scale Gibson, I. Gibson, I. Mensing, G. Mensing, G. 455en_HK
dc.description.tableofcontentsv.1 Research of feature conversion and representation of product process information model Gao, Jian Gao, Jian Zheng, Detao Zheng, Detao Zhang, Ping Zhang, Ping Zhu, Guowang Zhu, Guowang Sun, Jian Sun, Jian 461en_HK
dc.description.tableofcontentsv.1 Research on customer-oriented CAPP system modeling technique of prismatic parts based on feature Gao, Juhong Gao, Juhong Xu, Yanshen Xu, Yanshen 467en_HK
dc.description.tableofcontentsv.1 The structure of feature layers and its application in CAD/CAM integration Guo, Qun Guo, Qun Zhong, Yifang Zhong, Yifang Wan, Li Wan, Li Zhou, Ji Zhou, Ji 474en_HK
dc.description.tableofcontentsv.1 3D objects feature match based on relational graph Wang, Xinhua Wang, Xinhua Huo, Chuanhue Huo, Chuanhue Li, Yuguang Li, Yuguang Li, Deren Li, Deren Huang, Peizhi Huang, Peizhi 480en_HK
dc.description.tableofcontentsv.1 The feature modelling for a sculptured object Au, C.K. Au, C.K. Yuen, M.M.F. Yuen, M.M.F. 486en_HK
dc.description.tableofcontentsv.1 A method for recognizing feature interactions Zhang, C. Zhang, Z. Chan, K.W. Chan, K.W. Chen, Y.H. Chen, Y.H. 492en_HK
dc.description.tableofcontentsv.2 Towards a virtual design environment: a shared semantic product model Gui, Jin-kang Gui, Jin-kang Yla- Mononen, Timo Yla-Mononen, Timo Jokinen, Harri Jokinen, Harri 659en_HK
dc.description.tableofcontentsv.1 Standardization of base design sequences of heat- exchanger for power plant Yamaguchi, Hideyuki Yamaguchi, Hideyuki Zhang, Zhihua Zhang, Zhihua Nagasawa, Isao Nagasawa, Isao Umeda, Masanobu Umeda, Masanobu 504en_HK
dc.description.tableofcontentsv.1 Implementation of design for assembly: assebly- centric modeling and digital mock-up system Jung, Yoong- ho Jung, Yoong-ho 510en_HK
dc.description.tableofcontentsv.1 Integrated CAM design and manufacturing system Tang, L. Tang, L. 517en_HK
dc.description.tableofcontentsv.1 Tolerance design and analysis using the tolerance regions Chen, Jyun-ming Chen, Jyun-ming Chen, Chi-hui Chen, Chi-hui 523en_HK
dc.description.tableofcontentsv.1 An approach to automate the bending sequence of progressive dies Chan, C.C. Chan, C.C. Lai, C.H. Lai, C.H. 529en_HK
dc.description.tableofcontentsv.1 Simulation approach in planning and design of manufacturing cells - a case study Chan, F.T.S. Chan, F.T.S. Ip, R.W.L. Ip, R.W.L. 535en_HK
dc.description.tableofcontentsv.1 The application of genetic algorithm in the planning of FMS system Keung, K.W. Keung, K.W. Ip, W.H. Ip, W.H. Li, Y. Li, Y. Wang, D.W. Wang, D.W. 542en_HK
dc.description.tableofcontentsv.1 An FMS process planning system based on coloured petri nets Wong, T.N. Wong, T.N. Ng, K.H. Ng, K.H. Kwok, M.C.K. Kwok, M.C.K. 548en_HK
dc.description.tableofcontentsv.1 Dynamic mixed dispatching of FMS Krishna Kishore, A. Krishna Kishore, A. Ramesh Babu, N. Ramesh Babu, N. 554en_HK
dc.description.tableofcontentsv.1 Develop silicone steel sheet cutting patterns with filled-in blanks Cui, Yaodong Cui, Yaodong Zhu, Lian Zhu, Lian Jin, Aiming Jin, Aiming Cao, Ming Cao, Ming 560en_HK
dc.description.tableofcontentsv.2 Solutions to fundamental problems in B-spline curve design Qin, Kaihuai Qin, Kaihuai Guan, Youjiang Guan, Youjiang Wang, W. Wang, W. 665en_HK
dc.description.tableofcontentsv.1 An integrated system of CAPP and job shop scheduling Deng, Chao Deng, Chao Li, Peigen Li, Peigen Luo, Bin Luo, Bin 565en_HK
dc.description.tableofcontentsv.1 Study on NC automatically programming for cartridge valve blocks Lin, Xie Lin, Xie 571en_HK
dc.description.tableofcontentsv.1 Generation of alternative process plans by net model Kang, Min-hyoung Kang, Min-hyoung Park, Ji-hyung Park, Ji-hyung Park, Myon-woong Park, Myon-woong 577en_HK
dc.description.tableofcontentsv.1 Tools for assembly in a virtual environment Dewar, R.G. Dewar, R.G. Ritchie, J.M. Ritchie, J.M. Carpenter, I.D. Carpenter, I.D. Simmons, J.E.L. Simmons, J.E.L. 583en_HK
dc.description.tableofcontentsv.1 Exact recognition of compound feature by feature adjacency matrix elimination Yu, Yong Yu, Yong Zhang, Tie-chang Zhang, Tie-chang 588en_HK
dc.description.tableofcontentsv.1 Towards adaptable product development Gardan, Y. Gardan, Y. Jung, J.P. Jung, J.P. Lanuel, Y. Lanuel, Y. Leinen, S. Leinen, S. Martin, B. Martin, B. Minich, C. Minich, C. Perrin, E. Perrin, E. Poinsignon, C. Poinsgnon, C. Stemart, I. Stemart, I. 594en_HK
dc.description.tableofcontentsv.1 Automatic selection of die structure based on product features of deep-drawn components Sing, W.M. Sing, W.M. Rao, K.P. Rao, K.P. 600en_HK
dc.description.tableofcontentsv.1 Identification of grain growth in wood machining using artificial neural networks Karri, V. Karri, V. 606en_HK
dc.description.tableofcontentsv.1 Author/Session/Page index IIen_HK
dc.description.tableofcontentsv.2 Identifying and explaining infeasible assembly operations Abrantes, Maria Joao Abrantes, Maria Joao Hill, Simon D. Hill, Simon D. 612en_HK
dc.description.tableofcontentsv.2 Neural network method to reconstruct the freeform surfaces Wang, Kai Wang, Kai Zhang, Caiming Zhang, Caiming 672en_HK
dc.description.tableofcontentsv.1 Aspects of the design of a multiprocessor system for a flexible manufacturing system Abachi, H. Abachi, H. Ibrahim, R. Ibrahim, R. 72en_HK
dc.description.tableofcontentsv.2 Surface patches for filling arbitrary topological networks Zhang, Wenzu Zhang, Wenzu Wang, Fengyin Wang, Fengyin Wu, Bo Wu, Bo Yang, Shuzi Yang, Shuzi 680en_HK
dc.description.tableofcontentsv.2 Constraint-based planar free form shape Lam, T.W. Lam, T.W. Yu, K.M. Yu, K.M. Yip, Y.C. Yip, Y.C. 685en_HK
dc.description.tableofcontentsv.2 A design support system for basic design of power plant heat-exchanger Zhang, Zhihua Zhang, Zhihua Yamaguchi, Hideyuki Yamaguchi, Hideyuki Nagasawa, Isao Nagasawa, Isao Umeda, Masanobu Umeda, Masanobu 691en_HK
dc.description.tableofcontentsv.2 Modelling the human body for ergonomic CAD Case, K. Case, K. Porter, J.M. Porter, J.M. Xiao, D. Xiao, D. Acar, B.S. Acar, B.S. 697en_HK
dc.description.tableofcontentsv.2 A simulation model for IC engine turbocharger- exhaust manifold design Yang, Jingbin Yang, Jingbin Campbell, Thomas Campbell, Thomas 703en_HK
dc.description.tableofcontentsv.2 Computer-aided mechanism design for constrained function generation in a robotic automation cell Liang, Zhongming(Wilson) Liang, Zhongming(Wilson) 709en_HK
dc.description.tableofcontentsv.2 A new CNC system with sculptured surface interpolation capability Zhou, Yanhong Zhou, Yanhong Zhan, Yong Zhan, Yong Zhou, Ji Zhou, Ji 715en_HK
dc.description.tableofcontentsv.2 Selection of optimal milling parameters by genetic algorithm Lau, T.L. Lau, T.L. Yang, Qinghao Yang, Qinghao 721en_HK
dc.description.tableofcontentsv.2 CAM sofeware for ultra-precision aspheric surface using tri-arc interpolation Yang, M.Y. Yang, M.Y. Lee, T.M. Lee, T.M. 727en_HK
dc.description.tableofcontentsv.2 Cutter location data (CLdata) generation for flat tool in multi-axis milling operations Awan, Khalil Aslam Awan, Khalil Aslam 733en_HK
dc.description.tableofcontentsv.1 Integration of machines and software packages to achieve computer integrated manufacutring Lau, Henry Lau, Henry Chan, Felix, T.S. Chan, Felix, T.S. Ip, Ralph W.L. Ip, Ralph W.L. 77en_HK
dc.description.tableofcontentsv.2 Pocket machining NC program verification based on plane partitioning Daho, O. Ben Ahmed Daho, O. Ben Ahmed Poiraudeau, J.F. Poiraudeau, J.F. Bazzi, M. Bazzi, M. 743en_HK
dc.description.tableofcontentsv.2 Influence of tool preparation scheduling onto the performance of machining centres Petuelli, G. Petuelli, G. Mueller, U. Mueller, U. 749en_HK
dc.description.tableofcontentsv.2 Neighborhood concept for efficient nesting of flat patterns Cheng, S.K. Cheng, S.K. Rao, K.P. Rao, K.P. 755en_HK
dc.description.tableofcontentsv.2 Study on flexible automatic inspection system Wang, Y.Z. Wang, Y.Z. Chen, Y.H. Chen, Y.H. 761en_HK
dc.description.tableofcontentsv.2 An object oriented methodology for operation & machine selection of feature based process planning system Reddy, S.V. Bhaskara Reddy, S.V. Bhaskara Krishna, N. Bala Kirshna, N. Bala Shunmugam, M.S. Shunmugam, M.S. Narendran, T.T. Narendran, T.T. 767en_HK
dc.description.tableofcontentsv.2 Decision-making system for process planning using a constraint programming approach Galantucci, L.M. Galantucci, L.M. Spina, R. Spina, R. Tricarico, L. Tricarico, L. 773en_HK
dc.description.tableofcontentsv.2 Automatic feature recognition from solid models Wong, T.N. Wong, T.N. Lam, S.M. Lam, S.M. 779en_HK
dc.description.tableofcontentsv.2 Multi-view feature modelling for manufacturing applications Wong, T.N. Wong, T.N. Leung, C.B. Leung, C.B. 785en_HK
dc.description.tableofcontentsv.2 Backward growing-based geometric reasoning for manufacturing feature recognition Yang, Zhi-xin Yang, Zhi-xin Joneja, Ajay Joneja, Ajay Zhou, Ji Zhou, Ji 791en_HK
dc.description.tableofcontentsv.2 Feature recognition for NC part programming Tuttle, R. Tuttle, R. Little, G. Little, G. Clark, D.E.R. Clark, D.E.R. Corney, J. Corney, J. 797en_HK
dc.description.tableofcontentsv.1 An efficient approach to manufacturing communications in a CIM environment Ding, Xinquan Ding, Xinquan Gu, Guanqun Gu, Guanqun Wu, Jieyi Wu, Jieyi 83en_HK
dc.description.tableofcontentsv.2 Assembly line balancing using modified genetic algorithm Guo, Y. Guo, Y. Chan, K.C. Chan, K.C. 803en_HK
dc.description.tableofcontentsv.2 Agents and multiagent manufacturing systems: modelling support Szczerbicki, Edward Szczerbicki, Edward 809en_HK
dc.description.tableofcontentsv.2 The research on intelligent platform ISPD for industrial simulation process drawing Jia, Y.Y. Jia, Y.Y. Leng, Y.N. Leng, Y.N. 815en_HK
dc.description.tableofcontentsv.2 Research on a fuzzy control method based on expert system for the cavity of saline production Liu, Dong Liu, Dong Yin, Guofu Yin, Guofu Chen, Jiuqiang Chen, Jiuqiang Hu, Xiaobing Hu, Xiaobing 821en_HK
dc.description.tableofcontentsv.2 The role of knowledge rich machine controllers within flexible manufacturing Gindy, N.N. Gindy, N.N. Pickett, N.J. Pickett, N.J. Owen, S. Owen, S. 826en_HK
dc.description.tableofcontentsv.2 Automatic machine setting for injection molding process Tan, K.H. Tan, K.H. Yuen, M.M.F. Yuen, M.M.F. 832en_HK
dc.description.tableofcontentsv.2 Development of an intelligent enterprise information system Ng, Johnny K.C. Ng, Johnny K.C. Ip, W.H. Ip, W.H. 838en_HK
dc.description.tableofcontentsv.2 A simulation based oscillatory sequencing algorithm for layout planning of FMS Subrahmanyam, V.H.R. Subrahmanyam, V.H.R. Babu, N. Ramesh Babu, N. Ramesh 845en_HK
dc.description.tableofcontentsv.2 Constraint support for engineering databases Lau, Ka-lok Lau, Ka-lok Goh, Angela Goh, Angela 851en_HK
dc.description.tableofcontentsv.2 Development of a CAD/CAM system for progressive dies: the system technological wheel die structure design Wang, Joshua F. Wang, Joshua F. Shi, C. Shi, C. Xiao, X. Xiao, X. Li, J. Li, J. 857en_HK
dc.description.tableofcontentsv.1 CAPP systems in CIM and traditional production environment Huang, N.K. Huang, N.K. Cui, N. Cui, N. Zhang, Z.M. Zhang, Z.M. Xu, J.X. Xu, J.X. Fan, Q.J. Fan, Q.J. 89en_HK
dc.description.tableofcontentsv.2 Optimization ideologies and approaches in CIMs development and implementation Xiong, M.H. Xiong, M.H. Han, Z.Y. Han, Z.Y. Zhong, Y.F. Zhong, Y.F. Zhou, J. Zhou, J. 863en_HK
dc.description.tableofcontentsv.2 Manufacturing and product development in the USA, in particular in the Los Angles basin and the strategic training and implementation of high manufacturing technology Grote, Karl H. Grote, Karl H. Walo, Michael L. Walo, Michael L. Miller, Jeffrey L. Miller, Jeffrey L. 868en_HK
dc.description.tableofcontentsv.2 The key for rapid prototyping technology: new material development Wang, Y.G. Wang, Y.G. Lim, Leslie K.C. Lim, Leslie K.C. 874en_HK
dc.description.tableofcontentsv.2 File format requirements for the rapid prototyping technologies of tomorrow Bohn, Jan Helge Bohn, Jan Helge 878en_HK
dc.description.tableofcontentsv.2 Impact of rapid prototyping on product development Noorani, R. Noorani, R. Gerencher, P. Gerencher, P. Mendelson, M. Mendelson, M. Es-Said, O. Es-Said, O. Dormann, S. Dormann, S. Fritz, B. Fritz, B. 884en_HK
dc.description.tableofcontentsv.2 Direct slicing for rapid prototyping Huang, Qiming Huang, Qiming Wang, Yungan Wang, Yungan 890en_HK
dc.description.tableofcontentsv.2 Parameter tuning and optimization for SLA rapid prototyping manufacturing processes Zhou, Jack G. Zhou, Jack G. Herscovici, Daniel Herscovici, Daniel Chen, Calvin C. Chen, Calvin C. 894en_HK
dc.description.tableofcontentsv.2 An automatic reverse engineering approach for rapid prototyping manufacturing Lin, G.C.I. Lin, G.C.I. Chen, L.C. Chen, L.C. 903en_HK
dc.description.tableofcontentsv.2 Reverse engineering based on multi axis difitized data Schoene, Chr. Schoene, Chr. Hoffmann, J. Hoffmann, J. 909en_HK
dc.description.tableofcontentsv.2 Range-image machining (RIM) - a tool for the production of high accuracy radiotherapy masks Ip, Ralph W.L. Ip, Ralph W.L. Chan, Felix T.S. Chan, Felix T.S. 915en_HK
dc.description.tableofcontentsv.1 A preliminary study of a fuzzy clustering and assignment problem-based cell formation algorithm Susanto, S. Susanto, S. Kennedy, R.D. Kennedy, R.D. Price, J.W.H. Price, J.W.H. 95en_HK
dc.description.tableofcontentsv.2 Reverse engineering: from discrete point data to 3D CAD model Tsang, N.K. Tsang, N.K. Chan, K.W. Chan, K.W. Tan, S.T. Tan, S.T. 921en_HK
dc.description.tableofcontentsv.2 Construction of sculptured surfaces from CMM measurement data Chen, F.L. Chen, F.L. Chiang, Y.M. Chiang, Y.M. 928en_HK
dc.description.tableofcontentsv.2 An assistant model in C.A.D. systems based on interactive planning Bellalem, Lotfi Bellalem, Lotfi Gardan, Yvon Gardan, Yvon Zakari, Abdelouahed Zakari, Abdelouahed 934en_HK
dc.description.tableofcontentsv.2 Building a homogeneous design assistant from heterogeneous experts: results from the IMCOD project Bernardi, Ansgar Bernardi, Ansgar Bachmann, Bernd Bachmann, Bernd Schoeller, Anna-Maria Scheller, Anna- Maria 941en_HK
dc.description.tableofcontentsv.2 A knowledge-based system for fault diagnosisi in plastic injection moulding Luong, L.H.S. Luong, L.H.S. Chan, F.T.S. Chan, F.T.S. Ip, R.W.L. Ip, R.W.L. 947en_HK
dc.description.tableofcontentsv.2 Fuzzy genetic algorithms for operation sequencing Wong, T.N. Wong, T.N. Chan, L.C.F. Chan, L.C.F. 953en_HK
dc.description.tableofcontentsv.2 Algorithm modelling of a job-shop type turning cell Zhang, P. Zhang, P. Bell, R. Bell, R. 959en_HK
dc.description.tableofcontentsv.2 The structure and implementation of a task-centred manufacturing information system for small-to-medium-sized engineering companies Wu, Bin Wu, Bin Ellis, Ray Ellis, Ray 965en_HK
dc.description.tableofcontentsv.2 Managing integrated manufacturing through real-time monitoring and TQM Tseng, Henry C. Tseng, Henry C. Ip, W.H. Ip, W.H. 971en_HK
dc.description.tableofcontentsv.2 The definition of a manufacturing strategy analysis /manufacturing systems design interface Hull, R.S. Hull, R.S. Wu, B. Wu, B. 978en_HK
dc.description.tableofcontentsv.1 How to improve the accuracy of prototype built by the laminated object manufacturing system Liu, Bin Liu, Bin Xiao, Yuejia Xiao, Yuejia Han, Ming Han, Ming Huang, Shuhuai Hauang, Shuhuai 105en_HK
dc.description.tableofcontentsv.2 Object-oriented modelling and development of flexible manufacturing cells Chu, L.K. Chu, L.K. Chiu, C.K.F. Chiu, C.K.F. 984en_HK
dc.description.tableofcontentsv.2 Proposition of an approach for a physio-economic product evaluation, starting at the design phase in a concurrent engineering context Raviart, D. Raviart, D. Senechal, O. Senechal, O. Tahon, C. Tahon, C. 990en_HK
dc.description.tableofcontentsv.2 Systematical approach for the product design Triouleyre, Jean Triouleyre, Jean 996en_HK
dc.description.tableofcontentsv.2 Framework technology for tool integration in integrated product development Bender, K. Bender, K. Bindbeutel, K. Bindbeutel, K. Glander, M. Blander, M. Karcher, A. Karcher, A. 1001en_HK
dc.description.tableofcontentsv.2 Integration of design software for concurrent engineering Zhen, Ke-zhang Chen, Ke-zhang 1007en_HK
dc.description.tableofcontentsv.2 Product development process simulation in concurrent engineering Zhang, Keshu Zhang, Keshu Tan, Xiaochun Tan, Xiaochun Chen, Jiadong Chen, Jiadong 1015en_HK
dc.description.tableofcontentsv.2 Surface modelling from CT-images Ma, Weiyin Ma, Weiyin Swaelens, Bart Swaelens, Bart Vancraen, Wilfried Vancraen, Wilfried 1021en_HK
dc.description.tableofcontentsv.2 A laser probe development for 3D surface measurement Tang, Xiaoqi Tang, Xiaoqi Wang, Pingjiang Wang, Pingjiang Chen, Jihong Chen, Jihong Zhou, Ji Zhou, Ji Cai, Lilong Cai, Lilong 1027en_HK
dc.description.tableofcontentsv.2 An integration approach of CMM with CAD/CAM systems Naqasha, R.R. Naqasha, R.R. Al-Kindi, G.A. Al-Kindi, G.A. Kadhim, M.J. Kadhim, M.J. 1033en_HK
dc.description.tableofcontentsv.2 A new fast algorithm for engineering drawing vecterization Liu, C.Y. Liu, C.Y. Chen, Y.H. Chen, Y.H. Liu, X.M. Liu, X.M. Liu, J.R. Liu, J.R. Li, H.T. Li, H.T. 1039en_HK
dc.description.tableofcontentsv.1 Study on multifunctional rapid prototyping manufacutring (M-RPMS) systems Yan, Yongnian Yan, Yongnian Zeng, Guang Zeng, Guang Zhang, Wei Zhang, Wei Guo, Haibin Guo, Haibin Wu, Liangwei Wu, Liangwei Zhang, Renji Zhang, Renji 111en_HK
dc.description.tableofcontentsv.2 A gouging-free and collision-free toolpath generation algorithm a robotic cutting system Tse, W.C. Tse, W.C. Hu, Y.N. Hu, Y.N. Chen, Y.H. Chen, Y.H. 1045en_HK
dc.description.tableofcontentsv.2 Analysis of robot work by modelling the unit motion of robots Kwon, K.S. Kwon, K.S. Kim, J.S. Kim, J.S. 1051en_HK
dc.description.tableofcontentsv.2 Motion planning and collision avoidance with complex geometry Cameron, Stephen Cameron, Stephen Qin, Caigong Qin, Caigong 1057en_HK
dc.description.tableofcontentsv.2 Design/manufacture CNC milling machine with open structure in control system Wu, M.J. Wu, M.J. Shaw, M.H. Shaw, M.H. Lee, C.W. Lee, C.W. Wang, C.C. Wang, C.C. 1063en_HK
dc.description.tableofcontentsv.2 Investigation on machined surface temperature in turning Chu, T.H. Chu, T.H. Wallbank, J. Wallbank, J. 1069en_HK
dc.description.tableofcontentsv.2 Forecasting and control of the component accuracy in turning with advanced algorithms Cheng, K. Cheng, K. Kirkwood, D. Kirkwood, D. Chen, X.H. Chen, X.H. 1075en_HK
dc.description.tableofcontentsv.2 Analysis of relationship among design methods Chen, Ke-zhang Chen, Ke-zhang 1079en_HK
dc.description.tableofcontentsv.2 Features as autonomous agents: an alternative paradigm for concurrent engineering Jacquel, D. Jacquel, D. Salmon, J.C. Salmon, J.C. Mill, F.G. Mill, F.G. 1087en_HK
dc.description.tableofcontentsv.2 Key enabling technology for concurrent engineering Kuttner, Brian C. Kuttner, Brian C. 1093en_HK
dc.description.tableofcontentsv.2 Computer-aided parting line generation for free- form solid models Wong, T. Wong, T. Tan, S.T. Tan, S.T. Sze, W.S. Sze, W.S. 1097en_HK
dc.description.tableofcontentsv.1 Design of SLS (Selective Laser Sintering) in M-RPMS (Multi-fuctional Rapid Prototype Manufacturing System) Zhang, Renji Zhang, Renji Sui, Guanghua Sui, Guanghua Guo, Haibin Guo, Haibin Yan, Yongnian Yan, Yongnian 117en_HK
dc.description.tableofcontentsv.2 Modelling cloth deformation Zhao, Y.F. Zhao, Y.F. Tan, S.T. Tan, S.T. Wong, T.N. Wong, T.N. Chen, W.J. Chen, W.J. 1106en_HK
dc.format.extent2 v : ill. 25 cm.en_HK
dc.format.mimetypeapplication/pdfen_HK
dc.languageengen_HK
dc.publisher[Dept. of Mechanical Engineering, University of Hong Kong]en_HK
dc.rightsCreative Commons: Attribution 3.0 Hong Kong License-
dc.subject.ddc670.427 I61 p97en_HK
dc.subject.lcshConferences held in Hong Kong -- Manufacturing processesen_HK
dc.subject.lcshManufactures -- Automation.en_HK
dc.subject.lcshManufacturing processes -- Automation.en_HK
dc.subject.lcshMechanical engineering -- Congresses.en_HK
dc.subject.lcshProduction engineering -- Congresses.en_HK
dc.titleProceedings of the International Conference on Manufacturing Automation, April 28-30, 1997, Hong Kongen_HK
dc.typeBooken_HK
dc.identifier.hkulb1807848en_HK
dc.description.naturepublished_or_final_versionen_HK

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats