File Download
  Links for fulltext
     (May Require Subscription)
Supplementary

Conference Paper: A CAD modeling system for the components made of multi heterogeneous materials

TitleA CAD modeling system for the components made of multi heterogeneous materials
Authors
KeywordsMetrology and standardization
Issue Date2003
PublisherIEEE.
Citation
IEEE International Conference on Emerging Technologies and Factory Automation Proceedings, Lisbon, Portugal, 16-19 September 2003, v. 1, p. 559-565 How to Cite?
AbstractThe heterogeneous materials have been used for satisfying the requirements for special functions of components in various fields. To design and manufacture the components made of multi heterogeneous materials, the computer models for representing them need first to be built so that further analysis, optimization and manufacturing can be implemented based on the models. Since current modeling techniques can capture only the geometric information, a new modeling method has been developed to build the model that can include all the material information along with geometry information. Based on this method, this paper develops a system for modeling the components made of multi heterogeneous materials. With the system, users can apply the functions of current CAD graphic software to build CAD models for their heterogeneous components designed and display both material and geometric information for any cross section of the components they select. As an example for applying the system, the modeling for a special pipe is illustrated.
Persistent Identifierhttp://hdl.handle.net/10722/46675

 

DC FieldValueLanguage
dc.contributor.authorZhu, Fen_HK
dc.contributor.authorChen, KZen_HK
dc.date.accessioned2007-10-30T06:55:38Z-
dc.date.available2007-10-30T06:55:38Z-
dc.date.issued2003en_HK
dc.identifier.citationIEEE International Conference on Emerging Technologies and Factory Automation Proceedings, Lisbon, Portugal, 16-19 September 2003, v. 1, p. 559-565en_HK
dc.identifier.urihttp://hdl.handle.net/10722/46675-
dc.description.abstractThe heterogeneous materials have been used for satisfying the requirements for special functions of components in various fields. To design and manufacture the components made of multi heterogeneous materials, the computer models for representing them need first to be built so that further analysis, optimization and manufacturing can be implemented based on the models. Since current modeling techniques can capture only the geometric information, a new modeling method has been developed to build the model that can include all the material information along with geometry information. Based on this method, this paper develops a system for modeling the components made of multi heterogeneous materials. With the system, users can apply the functions of current CAD graphic software to build CAD models for their heterogeneous components designed and display both material and geometric information for any cross section of the components they select. As an example for applying the system, the modeling for a special pipe is illustrated.en_HK
dc.format.extent428878 bytes-
dc.format.extent1819 bytes-
dc.format.mimetypeapplication/pdf-
dc.format.mimetypetext/plain-
dc.languageengen_HK
dc.publisherIEEE.en_HK
dc.rightsCreative Commons: Attribution 3.0 Hong Kong License-
dc.rights©2003 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.en_HK
dc.subjectMetrology and standardizationen_HK
dc.titleA CAD modeling system for the components made of multi heterogeneous materialsen_HK
dc.typeConference_Paperen_HK
dc.description.naturepublished_or_final_versionen_HK
dc.identifier.doi10.1109/ETFA.2003.1247756en_HK
dc.identifier.hkuros88918-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats