File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Adhesion force of polymeric three-dimensional microstructures fabricated by microstereolithography

TitleAdhesion force of polymeric three-dimensional microstructures fabricated by microstereolithography
Authors
Issue Date2002
Citation
Applied Physics Letters, 2002, v. 81, n. 21, p. 3963-3965 How to Cite?
AbstractMicrostereolithography was used to fabricate the adhesion force of polymeric three-dimensional microstructures. The capillary force of the solvent caused the deformation and adhesion of the fabricated beams during the evaporative releasing. The fabrication and releasing of the test structures with parallel beams was done from the liquid resin via evaporation. The adhesion force between two 1,6-hexanediol diacrylate (HDDA) polymeric parallel beams was found by measuring the relationship between the adhesion length and the geometry of the beams and was γ=72±5 mN/m.
Persistent Identifierhttp://hdl.handle.net/10722/256873
ISSN
2015 Impact Factor: 3.142
2015 SCImago Journal Rankings: 1.105

 

DC FieldValueLanguage
dc.contributor.authorWu, Dongmin-
dc.contributor.authorFang, Nicholas-
dc.contributor.authorSun, Cheng-
dc.contributor.authorZhang, Xiang-
dc.date.accessioned2018-07-24T08:58:10Z-
dc.date.available2018-07-24T08:58:10Z-
dc.date.issued2002-
dc.identifier.citationApplied Physics Letters, 2002, v. 81, n. 21, p. 3963-3965-
dc.identifier.issn0003-6951-
dc.identifier.urihttp://hdl.handle.net/10722/256873-
dc.description.abstractMicrostereolithography was used to fabricate the adhesion force of polymeric three-dimensional microstructures. The capillary force of the solvent caused the deformation and adhesion of the fabricated beams during the evaporative releasing. The fabrication and releasing of the test structures with parallel beams was done from the liquid resin via evaporation. The adhesion force between two 1,6-hexanediol diacrylate (HDDA) polymeric parallel beams was found by measuring the relationship between the adhesion length and the geometry of the beams and was γ=72±5 mN/m.-
dc.languageeng-
dc.relation.ispartofApplied Physics Letters-
dc.titleAdhesion force of polymeric three-dimensional microstructures fabricated by microstereolithography-
dc.typeArticle-
dc.description.natureLink_to_subscribed_fulltext-
dc.identifier.doi10.1063/1.1522825-
dc.identifier.scopuseid_2-s2.0-0037132257-
dc.identifier.volume81-
dc.identifier.issue21-
dc.identifier.spage3963-
dc.identifier.epage3965-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats