File Download
  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Fixing a fractured arthrodesed hip with rapid prototype templating and minimal invasive plate osteosynthesis

TitleFixing a fractured arthrodesed hip with rapid prototype templating and minimal invasive plate osteosynthesis
Authors
KeywordsFracture
3D printing
Plating
Minimal invasive
Hip fusion
Issue Date2015
PublisherElsevier Ltd. The Journal's web site is located at http://www.traumacasereports.com/
Citation
Trauma Case Reports, 2015, v. 1 n. 9-12, p. 79-83 How to Cite?
Abstract© 2015 The Authors.CASE: We present an elderly lady with an intertrochanteric fracture of a previously fused hip. A 3D printed model of her pelvis and femur was used for implant templating before surgery. Minimal invasive fixation was performed with a spanning reversed distal femur locking plate without the need for removal of the previous implant. Multiple long locking screws were placed in the supra-acetabular region. The patient had union in 4 months, return to function and no complication. Conclusion: The technique allowed us to optimize implant selection and insert screws safely at difficult trajectories using minimal invasive surgery.
Persistent Identifierhttp://hdl.handle.net/10722/231203
ISSN

 

DC FieldValueLanguage
dc.contributor.authorFang, CX-
dc.contributor.authorFang, B-
dc.contributor.authorWong, TM-
dc.contributor.authorLau, TW-
dc.contributor.authorPun, T-
dc.contributor.authorLeung, FKL-
dc.date.accessioned2016-09-20T05:21:25Z-
dc.date.available2016-09-20T05:21:25Z-
dc.date.issued2015-
dc.identifier.citationTrauma Case Reports, 2015, v. 1 n. 9-12, p. 79-83-
dc.identifier.issn2352-6440-
dc.identifier.urihttp://hdl.handle.net/10722/231203-
dc.description.abstract© 2015 The Authors.CASE: We present an elderly lady with an intertrochanteric fracture of a previously fused hip. A 3D printed model of her pelvis and femur was used for implant templating before surgery. Minimal invasive fixation was performed with a spanning reversed distal femur locking plate without the need for removal of the previous implant. Multiple long locking screws were placed in the supra-acetabular region. The patient had union in 4 months, return to function and no complication. Conclusion: The technique allowed us to optimize implant selection and insert screws safely at difficult trajectories using minimal invasive surgery.-
dc.languageeng-
dc.publisherElsevier Ltd. The Journal's web site is located at http://www.traumacasereports.com/-
dc.relation.ispartofTrauma Case Reports-
dc.rightsThis work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.-
dc.subjectFracture-
dc.subject3D printing-
dc.subjectPlating-
dc.subjectMinimal invasive-
dc.subjectHip fusion-
dc.titleFixing a fractured arthrodesed hip with rapid prototype templating and minimal invasive plate osteosynthesis-
dc.typeArticle-
dc.identifier.emailFang, CX: cfang@hku.hk-
dc.identifier.emailWong, TM: wongtm@hku.hk-
dc.identifier.emailLeung, FKL: klleunga@hkucc.hku.hk-
dc.identifier.authorityFang, CX=rp02016-
dc.identifier.authorityWong, TM=rp01689-
dc.identifier.authorityLeung, FKL=rp00297-
dc.description.naturepublished_or_final_version-
dc.identifier.doi10.1016/j.tcr.2015.10.005-
dc.identifier.scopuseid_2-s2.0-84958533352-
dc.identifier.hkuros264606-
dc.identifier.volume1-
dc.identifier.issue9-12-
dc.identifier.spage79-
dc.identifier.epage83-
dc.publisher.placeUnited Kingdom-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats