File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Conference Paper: Reducing cube volume in recrystallized texture by controlling the finishing temperature and rolling strain in Al-5%Mg alloy

TitleReducing cube volume in recrystallized texture by controlling the finishing temperature and rolling strain in Al-5%Mg alloy
Authors
KeywordsAluminium Alloys
Cube Transition Bands
Recrystallization Texture
Shear Bands
Issue Date2003
PublisherTrans Tech Publications Ltd. The Journal's web site is located at http://www.scientific.net
Citation
Materials Science Forum, 2003, v. 426-432 n. 4, p. 3763-3768 How to Cite?
AbstractA research programme aimed at producing weak texture in a strong work hardening alloy, Al-5%Mg has been undertaken. Two strategies are reported. In the first, the effect of hot band finishing temperature is investigated. When the temperature was high enough to produce a recrystallized hot band, subsequent cold rolling and annealing at 300 °C produced a weaker texture compared with annealing at 450 °C. A second approach involved splitting the rolling process into two parts with an intermediate anneal, with both the intermediate and final annealing temperatures as variables. The best results were obtained when the intermediate annealing temperature produced a grain size of 35 μm compared with the lower temperature of grain size 10 μm, and the final annealing temperature was low.
Persistent Identifierhttp://hdl.handle.net/10722/174085
ISSN
2005 Impact Factor: 0.399
References

 

DC FieldValueLanguage
dc.contributor.authorChang, CSTen_US
dc.contributor.authorInagaki, Hen_US
dc.contributor.authorDuggan, BJen_US
dc.date.accessioned2012-11-14T06:20:47Z-
dc.date.available2012-11-14T06:20:47Z-
dc.date.issued2003en_US
dc.identifier.citationMaterials Science Forum, 2003, v. 426-432 n. 4, p. 3763-3768en_US
dc.identifier.issn0255-5476en_US
dc.identifier.urihttp://hdl.handle.net/10722/174085-
dc.description.abstractA research programme aimed at producing weak texture in a strong work hardening alloy, Al-5%Mg has been undertaken. Two strategies are reported. In the first, the effect of hot band finishing temperature is investigated. When the temperature was high enough to produce a recrystallized hot band, subsequent cold rolling and annealing at 300 °C produced a weaker texture compared with annealing at 450 °C. A second approach involved splitting the rolling process into two parts with an intermediate anneal, with both the intermediate and final annealing temperatures as variables. The best results were obtained when the intermediate annealing temperature produced a grain size of 35 μm compared with the lower temperature of grain size 10 μm, and the final annealing temperature was low.en_US
dc.languageengen_US
dc.publisherTrans Tech Publications Ltd. The Journal's web site is located at http://www.scientific.neten_US
dc.relation.ispartofMaterials Science Forumen_US
dc.subjectAluminium Alloysen_US
dc.subjectCube Transition Bandsen_US
dc.subjectRecrystallization Textureen_US
dc.subjectShear Bandsen_US
dc.titleReducing cube volume in recrystallized texture by controlling the finishing temperature and rolling strain in Al-5%Mg alloyen_US
dc.typeConference_Paperen_US
dc.identifier.emailDuggan, BJ: bjduggan@hkucc.hku.hken_US
dc.identifier.authorityDuggan, BJ=rp01686en_US
dc.description.naturelink_to_subscribed_fulltexten_US
dc.identifier.scopuseid_2-s2.0-0037661384en_US
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-0037661384&selection=ref&src=s&origin=recordpageen_US
dc.identifier.volume426-432en_US
dc.identifier.issue4en_US
dc.identifier.spage3763en_US
dc.identifier.epage3768en_US
dc.publisher.placeSwitzerlanden_US
dc.identifier.scopusauthoridChang, CST=8400474300en_US
dc.identifier.scopusauthoridInagaki, H=7202836723en_US
dc.identifier.scopusauthoridDuggan, BJ=7005772998en_US

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats