File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Textures, models and experiments relating to drawable low carbon steels

TitleTextures, models and experiments relating to drawable low carbon steels
Authors
KeywordsDeformation Banding Modeling
Drawable Low Carbon Steels
{111}<Hkl> Textures
Issue Date1999
PublisherTechno-Press. The Journal's web site is located at http://technop.kaist.ac.kr/journal_mam.jsp
Citation
Metals And Materials International, 1999, v. 5 n. 6, p. 503-509 How to Cite?
AbstractThis paper reports three distinct but related projects. In the first, an attempt is made to simulate BCC rolling textures by including a conditional deformation banding criterion modeled in a Taylor/Chin framework. The model is then run backwards to find the origins of the a and γ fibers. The practical importance of this work is to produce an ideal deformation texture from which it might be possible to maximise the development of {111} and to minimise {100} during rolling, since it is well known that {111} recrystallized components are associated with the γ fibre. The second investigation is concerned with the origins of the {111} texture in a batch annealing steel. It is demonstrated that the γ fibre grains are heavily shear banded, and the nucleation of {111} grains occurs in these bands. The shear band material is a ND-rotated {111} component. Clearly, the condition leading to extreme strain localisation is determined by both the slip geometry and the solute/precipitate state. Finally an investigation into the origins of {111} in IF steels using EBSP (Electron Back-Scattering Pattern) on longitudinal sections has failed to identify any sites of strain localisation for nucleation of these grains but it is shown that grain growth strengthens {111} components.
Persistent Identifierhttp://hdl.handle.net/10722/174011
ISSN
2002 Impact Factor: 0.293
References

 

DC FieldValueLanguage
dc.contributor.authorDuggan, BJen_US
dc.contributor.authorLiu, GLen_US
dc.contributor.authorNing, Hen_US
dc.contributor.authorTse, YYen_US
dc.date.accessioned2012-11-14T06:20:16Z-
dc.date.available2012-11-14T06:20:16Z-
dc.date.issued1999en_US
dc.identifier.citationMetals And Materials International, 1999, v. 5 n. 6, p. 503-509en_US
dc.identifier.issn1225-9438en_US
dc.identifier.urihttp://hdl.handle.net/10722/174011-
dc.description.abstractThis paper reports three distinct but related projects. In the first, an attempt is made to simulate BCC rolling textures by including a conditional deformation banding criterion modeled in a Taylor/Chin framework. The model is then run backwards to find the origins of the a and γ fibers. The practical importance of this work is to produce an ideal deformation texture from which it might be possible to maximise the development of {111}<hkl> and to minimise {100}<hkl> during rolling, since it is well known that {111} recrystallized components are associated with the γ fibre. The second investigation is concerned with the origins of the {111}<hkl> texture in a batch annealing steel. It is demonstrated that the γ fibre grains are heavily shear banded, and the nucleation of {111} grains occurs in these bands. The shear band material is a ND-rotated {111} component. Clearly, the condition leading to extreme strain localisation is determined by both the slip geometry and the solute/precipitate state. Finally an investigation into the origins of {111}<hkl> in IF steels using EBSP (Electron Back-Scattering Pattern) on longitudinal sections has failed to identify any sites of strain localisation for nucleation of these grains but it is shown that grain growth strengthens {111} components.en_US
dc.languageengen_US
dc.publisherTechno-Press. The Journal's web site is located at http://technop.kaist.ac.kr/journal_mam.jspen_US
dc.relation.ispartofMetals and Materials Internationalen_US
dc.subjectDeformation Banding Modelingen_US
dc.subjectDrawable Low Carbon Steelsen_US
dc.subject{111}<Hkl> Texturesen_US
dc.titleTextures, models and experiments relating to drawable low carbon steelsen_US
dc.typeArticleen_US
dc.identifier.emailDuggan, BJ: bjduggan@hkucc.hku.hken_US
dc.identifier.authorityDuggan, BJ=rp01686en_US
dc.description.naturelink_to_subscribed_fulltexten_US
dc.identifier.scopuseid_2-s2.0-0012413196en_US
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-0012413196&selection=ref&src=s&origin=recordpageen_US
dc.identifier.volume5en_US
dc.identifier.issue6en_US
dc.identifier.spage503en_US
dc.identifier.epage509en_US
dc.publisher.placeKorea, Republic ofen_US
dc.identifier.scopusauthoridDuggan, BJ=7005772998en_US
dc.identifier.scopusauthoridLiu, GL=7501460279en_US
dc.identifier.scopusauthoridNing, H=7005349404en_US
dc.identifier.scopusauthoridTse, YY=7005116855en_US

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats