File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Influence of support structure on the permeation behavior of polyetherimide-derived carbon molecular sieve composite membrane

TitleInfluence of support structure on the permeation behavior of polyetherimide-derived carbon molecular sieve composite membrane
Authors
KeywordsBottom surfaces
Carbon molecular sieve
Ceramic disks
Ceramic supports
CMS membranes
Issue Date2012
PublisherElsevier BV. The Journal's web site is located at http://www.elsevier.com/locate/memsci
Citation
Journal of Membrane Science, 2012, v. 405-406, p. 250-260 How to Cite?
AbstractPolyetherimide (PEI) was used as polymeric precursor to prepare selective carbon molecular sieve (CMS) layer supported by a porous Al 2O 3 ceramic disk. The effects of the porous structure and surface roughness of the ceramic support on the interfacial adhesion and texture of the PEI/Al 2O 3-derived composite CMS membrane were investigated by modulating the sintering temperature and holding time. When the surface roughness of the ceramic support increased, the pore size and its distribution of the selective CMS layer were found to have shifted to the larger one and its roughness increased from the top to the bottom surface. This structure resulted in high permeability and low selectivity. Our results indicate that the porous structure of the ceramic support also played an important role in dominating the pore size and its distribution of the selective CMS layer, which influences the gas separation performance. © 2012 Elsevier B.V.
Persistent Identifierhttp://hdl.handle.net/10722/159450
ISSN
2023 Impact Factor: 8.4
2023 SCImago Journal Rankings: 1.848
ISI Accession Number ID

 

DC FieldValueLanguage
dc.contributor.authorTseng, HHen_US
dc.contributor.authorShih, Ken_US
dc.contributor.authorShiu, PTen_US
dc.contributor.authorWey, MYen_US
dc.date.accessioned2012-08-16T05:49:58Z-
dc.date.available2012-08-16T05:49:58Z-
dc.date.issued2012en_US
dc.identifier.citationJournal of Membrane Science, 2012, v. 405-406, p. 250-260en_US
dc.identifier.issn0376-7388-
dc.identifier.urihttp://hdl.handle.net/10722/159450-
dc.description.abstractPolyetherimide (PEI) was used as polymeric precursor to prepare selective carbon molecular sieve (CMS) layer supported by a porous Al 2O 3 ceramic disk. The effects of the porous structure and surface roughness of the ceramic support on the interfacial adhesion and texture of the PEI/Al 2O 3-derived composite CMS membrane were investigated by modulating the sintering temperature and holding time. When the surface roughness of the ceramic support increased, the pore size and its distribution of the selective CMS layer were found to have shifted to the larger one and its roughness increased from the top to the bottom surface. This structure resulted in high permeability and low selectivity. Our results indicate that the porous structure of the ceramic support also played an important role in dominating the pore size and its distribution of the selective CMS layer, which influences the gas separation performance. © 2012 Elsevier B.V.-
dc.languageengen_US
dc.publisherElsevier BV. The Journal's web site is located at http://www.elsevier.com/locate/memsci-
dc.relation.ispartofJournal of Membrane Scienceen_US
dc.subjectBottom surfaces-
dc.subjectCarbon molecular sieve-
dc.subjectCeramic disks-
dc.subjectCeramic supports-
dc.subjectCMS membranes-
dc.titleInfluence of support structure on the permeation behavior of polyetherimide-derived carbon molecular sieve composite membraneen_US
dc.typeArticleen_US
dc.identifier.emailShih, K: kshih@hkucc.hku.hken_US
dc.identifier.emailWey, MY: mywey@dragon.nchu.edu.tw-
dc.identifier.authorityShih, K=rp00167en_US
dc.description.naturelink_to_subscribed_fulltext-
dc.identifier.doi10.1016/j.memsci.2012.03.014-
dc.identifier.scopuseid_2-s2.0-84859443481-
dc.identifier.hkuros205538en_US
dc.identifier.volume405-406en_US
dc.identifier.spage250en_US
dc.identifier.epage260en_US
dc.identifier.isiWOS:000302782000026-
dc.publisher.placeNetherlands-
dc.identifier.citeulike10546617-
dc.identifier.issnl0376-7388-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats