File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Elastic/plastic buckling of a composite flat plate subjected to uniform edge compression

TitleElastic/plastic buckling of a composite flat plate subjected to uniform edge compression
Authors
Issue Date2000
PublisherPergamon. The Journal's web site is located at http://www.elsevier.com/locate/tws
Citation
Thin-Walled Structures, 2000, v. 38 n. 3, p. 247-265 How to Cite?
AbstractA theoretical approach, based on the plastic theory, has been developed for studying the elastic/plastic buckling behavior of a simply supported rectangular anisotropic plate subjected to edge compression. The said approach was employed to determine the critical buckling stresses of three different types of fiber reinforced composite plates, namely, carbon epoxy, glass epoxy and boron aluminum plates. Since the proposed approach is for a preliminary prediction of critical buckling loads of composite plates, the results obtained are deemed acceptable compared with those obtained by other authors experimentally.
Persistent Identifierhttp://hdl.handle.net/10722/156559
ISSN
2015 Impact Factor: 2.063
2015 SCImago Journal Rankings: 1.647
ISI Accession Number ID
References

 

DC FieldValueLanguage
dc.contributor.authorSoh, AKen_US
dc.contributor.authorBian, LCen_US
dc.contributor.authorChakrabarty, Jen_US
dc.date.accessioned2012-08-08T08:42:58Z-
dc.date.available2012-08-08T08:42:58Z-
dc.date.issued2000en_US
dc.identifier.citationThin-Walled Structures, 2000, v. 38 n. 3, p. 247-265en_US
dc.identifier.issn0263-8231en_US
dc.identifier.urihttp://hdl.handle.net/10722/156559-
dc.description.abstractA theoretical approach, based on the plastic theory, has been developed for studying the elastic/plastic buckling behavior of a simply supported rectangular anisotropic plate subjected to edge compression. The said approach was employed to determine the critical buckling stresses of three different types of fiber reinforced composite plates, namely, carbon epoxy, glass epoxy and boron aluminum plates. Since the proposed approach is for a preliminary prediction of critical buckling loads of composite plates, the results obtained are deemed acceptable compared with those obtained by other authors experimentally.en_US
dc.languageengen_US
dc.publisherPergamon. The Journal's web site is located at http://www.elsevier.com/locate/twsen_US
dc.relation.ispartofThin-Walled Structuresen_US
dc.titleElastic/plastic buckling of a composite flat plate subjected to uniform edge compressionen_US
dc.typeArticleen_US
dc.identifier.emailSoh, AK: aksoh@hkucc.hku.hken_US
dc.identifier.authoritySoh, AK=rp00170en_US
dc.description.naturelink_to_subscribed_fulltexten_US
dc.identifier.doi10.1016/S0263-8231(00)00038-0en_US
dc.identifier.scopuseid_2-s2.0-0034313261en_US
dc.identifier.hkuros59172-
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-0034313261&selection=ref&src=s&origin=recordpageen_US
dc.identifier.volume38en_US
dc.identifier.issue3en_US
dc.identifier.spage247en_US
dc.identifier.epage265en_US
dc.identifier.isiWOS:000166664700003-
dc.publisher.placeUnited Kingdomen_US
dc.identifier.scopusauthoridSoh, AK=7006795203en_US
dc.identifier.scopusauthoridBian, LC=7004333725en_US
dc.identifier.scopusauthoridChakrabarty, J=6701695885en_US

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats