File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: The effect of surface characteristics of polymeric materials on the strength of bonded joints

TitleThe effect of surface characteristics of polymeric materials on the strength of bonded joints
Authors
KeywordsAdhesive Joints
Critical Surface Tension
Joint Strength
Polymers
Surface Roughness
Issue Date1996
PublisherVSP. The Journal's web site is located at http://www.brill.nl/m_catalogue_sub6_id9737.htm
Citation
Journal Of Adhesion Science And Technology, 1996, v. 10 n. 4, p. 361-372 How to Cite?
AbstractThe degree of roughness and the linear direction of the abrasion process operated over the adherend surface are two important design factors for the adhesive joint. Thus, in the first part of this study, the surface roughness was varied by means of different grades of abrasive paper and its effect on the joint strength was studied. An investigation involving changing the linear direction with respect to the loading direction was also carried out. These experiments were done to determine the effectiveness of the abrasion process for the pretreatment of the adherend. A significant increase in joint strength was found for the abrasion treatment. However, it was shown that different linear directions did not have any significant effect on the joint strength. In the second part of this study, thermodynamic analysis of the bonding of dissimilar polymeric materials using different adhesives in terms of their surface tension, critical surface tension, and joint strength was carried out. The aim of the study was to determine the thermodynamic criteria for maximum joint strength in bonding dissimilar materials. The results showed that the joint strength was dictated by the adherend with the lower critical surface tension. Maximum joint strength for bonding dissimilar materials is attained when the surface tension of the adhesive used is close to that of the adherend with the lower critical surface tension.
Persistent Identifierhttp://hdl.handle.net/10722/155809
ISSN
2015 Impact Factor: 0.863
2015 SCImago Journal Rankings: 0.357
References

 

DC FieldValueLanguage
dc.contributor.authorNiem, PIFen_US
dc.contributor.authorLau, TLen_US
dc.contributor.authorKwan, KMen_US
dc.date.accessioned2012-08-08T08:37:51Z-
dc.date.available2012-08-08T08:37:51Z-
dc.date.issued1996en_US
dc.identifier.citationJournal Of Adhesion Science And Technology, 1996, v. 10 n. 4, p. 361-372en_US
dc.identifier.issn0169-4243en_US
dc.identifier.urihttp://hdl.handle.net/10722/155809-
dc.description.abstractThe degree of roughness and the linear direction of the abrasion process operated over the adherend surface are two important design factors for the adhesive joint. Thus, in the first part of this study, the surface roughness was varied by means of different grades of abrasive paper and its effect on the joint strength was studied. An investigation involving changing the linear direction with respect to the loading direction was also carried out. These experiments were done to determine the effectiveness of the abrasion process for the pretreatment of the adherend. A significant increase in joint strength was found for the abrasion treatment. However, it was shown that different linear directions did not have any significant effect on the joint strength. In the second part of this study, thermodynamic analysis of the bonding of dissimilar polymeric materials using different adhesives in terms of their surface tension, critical surface tension, and joint strength was carried out. The aim of the study was to determine the thermodynamic criteria for maximum joint strength in bonding dissimilar materials. The results showed that the joint strength was dictated by the adherend with the lower critical surface tension. Maximum joint strength for bonding dissimilar materials is attained when the surface tension of the adhesive used is close to that of the adherend with the lower critical surface tension.en_US
dc.languageengen_US
dc.publisherVSP. The Journal's web site is located at http://www.brill.nl/m_catalogue_sub6_id9737.htmen_US
dc.relation.ispartofJournal of Adhesion Science and Technologyen_US
dc.subjectAdhesive Jointsen_US
dc.subjectCritical Surface Tensionen_US
dc.subjectJoint Strengthen_US
dc.subjectPolymersen_US
dc.subjectSurface Roughnessen_US
dc.titleThe effect of surface characteristics of polymeric materials on the strength of bonded jointsen_US
dc.typeArticleen_US
dc.identifier.emailLau, TL:tllau@hkucc.hku.hken_US
dc.identifier.authorityLau, TL=rp00138en_US
dc.description.naturelink_to_subscribed_fulltexten_US
dc.identifier.scopuseid_2-s2.0-0029718226en_US
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-0029718226&selection=ref&src=s&origin=recordpageen_US
dc.identifier.volume10en_US
dc.identifier.issue4en_US
dc.identifier.spage361en_US
dc.identifier.epage372en_US
dc.publisher.placeNetherlandsen_US
dc.identifier.scopusauthoridNiem, PIF=6507654913en_US
dc.identifier.scopusauthoridLau, TL=7102222436en_US
dc.identifier.scopusauthoridKwan, KM=36937078500en_US

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats