File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: An electronic ballast with wide dimming range, high PF, and low EMI

TitleAn electronic ballast with wide dimming range, high PF, and low EMI
Authors
KeywordsDimmable Electronic Ballasts
Electromagnetic Interference
Power Factor Correction
Issue Date2001
Citation
Ieee Transactions On Power Electronics, 2001, v. 16 n. 4, p. 465-472 How to Cite?
AbstractThe authors describe an electronic ballast design with the capability of low radiated and conducted EMI over a wide dimming range. It overcomes some limitations of traditional electronic ballasts that use frequency variation for dimming control. The proposed design allows soft switching of the ballast from full-power operation down to less than 10% power. Low-cost and low-voltage power metal oxide semiconductor field effect transmitters (MOS-FETs) can be used in the proposed dimmable electronic ballast. The design approach is described and implemented successfully in a 2 × 36 W fluorescent lamp system.
Persistent Identifierhttp://hdl.handle.net/10722/155152
ISSN
2015 Impact Factor: 4.953
2015 SCImago Journal Rankings: 3.005
ISI Accession Number ID
References

 

DC FieldValueLanguage
dc.contributor.authorRon Hui, SYen_US
dc.contributor.authorLee, LMen_US
dc.contributor.authorChung, HSHen_US
dc.contributor.authorHo, YKen_US
dc.date.accessioned2012-08-08T08:32:05Z-
dc.date.available2012-08-08T08:32:05Z-
dc.date.issued2001en_US
dc.identifier.citationIeee Transactions On Power Electronics, 2001, v. 16 n. 4, p. 465-472en_US
dc.identifier.issn0885-8993en_US
dc.identifier.urihttp://hdl.handle.net/10722/155152-
dc.description.abstractThe authors describe an electronic ballast design with the capability of low radiated and conducted EMI over a wide dimming range. It overcomes some limitations of traditional electronic ballasts that use frequency variation for dimming control. The proposed design allows soft switching of the ballast from full-power operation down to less than 10% power. Low-cost and low-voltage power metal oxide semiconductor field effect transmitters (MOS-FETs) can be used in the proposed dimmable electronic ballast. The design approach is described and implemented successfully in a 2 × 36 W fluorescent lamp system.en_US
dc.languageengen_US
dc.relation.ispartofIEEE Transactions on Power Electronicsen_US
dc.subjectDimmable Electronic Ballastsen_US
dc.subjectElectromagnetic Interferenceen_US
dc.subjectPower Factor Correctionen_US
dc.titleAn electronic ballast with wide dimming range, high PF, and low EMIen_US
dc.typeArticleen_US
dc.identifier.emailRon Hui, SY:ronhui@eee.hku.hken_US
dc.identifier.authorityRon Hui, SY=rp01510en_US
dc.description.naturelink_to_subscribed_fulltexten_US
dc.identifier.doi10.1109/63.931047en_US
dc.identifier.scopuseid_2-s2.0-0035398930en_US
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-0035398930&selection=ref&src=s&origin=recordpageen_US
dc.identifier.volume16en_US
dc.identifier.issue4en_US
dc.identifier.spage465en_US
dc.identifier.epage472en_US
dc.identifier.isiWOS:000169564200001-
dc.publisher.placeUnited Statesen_US
dc.identifier.scopusauthoridRon Hui, SY=7202831744en_US
dc.identifier.scopusauthoridLee, LM=36088569400en_US
dc.identifier.scopusauthoridChung, HSH=7404007467en_US
dc.identifier.scopusauthoridHo, YK=22985183700en_US

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats