File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Conference Paper: Characterization of single stage 3 phase power factor correction circuit using modular single phase PWM DC-to-DC converters

TitleCharacterization of single stage 3 phase power factor correction circuit using modular single phase PWM DC-to-DC converters
Authors
KeywordsBridge Circuits
Computer Simulation
Electric Distortion
Electric Filters
Electric Potential
Electric Power Factor Correction
Pulse Width Modulation
Issue Date1999
PublisherIEEE
Citation
Pesc Record - Ieee Annual Power Electronics Specialists Conference, 1999, v. 2, p. 704-708 How to Cite?
AbstractFollowing the concept of critical conduction parameter for single phase PFC circuits, a critical conduction parameter K3Φ is derived for the 3 phase modular system. With this parameter (K3Φ) the optimum choice for the output filter can be determined to achieve the highest power factor of the system. The voltage conversion ratio required to achieve high power factor to fulfill the harmonic requirements is also derived. By operating the modular converter system in the discontinuous output current mode, the input current distortion can be reduced and the modular system can achieve high power factor. Both simulations and experimental results from a 1.5kW prototype using full bridge converter modules have confirmed the analysis.
Persistent Identifierhttp://hdl.handle.net/10722/136852
ISSN

 

DC FieldValueLanguage
dc.contributor.authorHo, YKEen_HK
dc.contributor.authorHui, SYRen_HK
dc.contributor.authorLee, YSen_HK
dc.date.accessioned2011-07-29T02:13:08Z-
dc.date.available2011-07-29T02:13:08Z-
dc.date.issued1999en_HK
dc.identifier.citationPesc Record - Ieee Annual Power Electronics Specialists Conference, 1999, v. 2, p. 704-708en_HK
dc.identifier.issn0275-9306en_HK
dc.identifier.urihttp://hdl.handle.net/10722/136852-
dc.description.abstractFollowing the concept of critical conduction parameter for single phase PFC circuits, a critical conduction parameter K3Φ is derived for the 3 phase modular system. With this parameter (K3Φ) the optimum choice for the output filter can be determined to achieve the highest power factor of the system. The voltage conversion ratio required to achieve high power factor to fulfill the harmonic requirements is also derived. By operating the modular converter system in the discontinuous output current mode, the input current distortion can be reduced and the modular system can achieve high power factor. Both simulations and experimental results from a 1.5kW prototype using full bridge converter modules have confirmed the analysis.en_HK
dc.languageengen_US
dc.publisherIEEEen_US
dc.relation.ispartofPESC Record - IEEE Annual Power Electronics Specialists Conferenceen_HK
dc.subjectBridge Circuitsen_US
dc.subjectComputer Simulationen_US
dc.subjectElectric Distortionen_US
dc.subjectElectric Filtersen_US
dc.subjectElectric Potentialen_US
dc.subjectElectric Power Factor Correctionen_US
dc.subjectPulse Width Modulationen_US
dc.titleCharacterization of single stage 3 phase power factor correction circuit using modular single phase PWM DC-to-DC convertersen_HK
dc.typeConference_Paperen_HK
dc.identifier.emailHui, SYR:ronhui@eee.hku.hken_HK
dc.identifier.authorityHui, SYR=rp01510en_HK
dc.description.naturelink_to_subscribed_fulltexten_US
dc.identifier.scopuseid_2-s2.0-0033335986en_HK
dc.identifier.volume2en_HK
dc.identifier.spage704en_HK
dc.identifier.epage708en_HK
dc.publisher.placeUnited Statesen_HK
dc.identifier.scopusauthoridHo, YKE=22985183700en_HK
dc.identifier.scopusauthoridHui, SYR=7202831744en_HK
dc.identifier.scopusauthoridLee, YS=14071748700en_HK

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats