File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Conference Paper: On the use of current sensors for control of power converters

TitleOn the use of current sensors for control of power converters
Authors
Qiu, DYYip, SCChung, HSHHui, SYR
KeywordsElectric Current Control
Electric Inductors
Electric Network Topology
Sensors
Spurious Signal Noise
Issue Date2001
PublisherIEEE
Citation
Pesc Record - Ieee Annual Power Electronics Specialists Conference, 2001, v. 1, p. 302-307 How to Cite?
AbstractThis paper investigates the use of current sensors for control of power converters. The whole system only requires current sensing devices that generate signals in response to the current flowing in inductors. Besides, such as used in current programming and in maximum current protection, the sensed current and the rate of change of the inductor current in different circuit topologies are used to determine the input and output voltages. Apart from reducing the number of sensors, the proposed method provides inherent electrical isolation between the power conversion stage and the controller, and thus reducing noise coupling.
Persistent Identifierhttp://hdl.handle.net/10722/136818
ISSN
0275-9306
2019 SCImago Journal Rankings: 0.125
References
References in Scopus

 

DC FieldValueLanguage
dc.contributor.authorQiu, DYen_HK
dc.contributor.authorYip, SCen_HK
dc.contributor.authorChung, HSHen_HK
dc.contributor.authorHui, SYRen_HK
dc.date.accessioned2011-07-29T02:12:52Z-
dc.date.available2011-07-29T02:12:52Z-
dc.date.issued2001en_HK
dc.identifier.citationPesc Record - Ieee Annual Power Electronics Specialists Conference, 2001, v. 1, p. 302-307en_HK
dc.identifier.issn0275-9306en_HK
dc.identifier.urihttp://hdl.handle.net/10722/136818-
dc.description.abstractThis paper investigates the use of current sensors for control of power converters. The whole system only requires current sensing devices that generate signals in response to the current flowing in inductors. Besides, such as used in current programming and in maximum current protection, the sensed current and the rate of change of the inductor current in different circuit topologies are used to determine the input and output voltages. Apart from reducing the number of sensors, the proposed method provides inherent electrical isolation between the power conversion stage and the controller, and thus reducing noise coupling.en_HK
dc.languageengen_US
dc.publisherIEEEen_US
dc.relation.ispartofPESC Record - IEEE Annual Power Electronics Specialists Conferenceen_HK
dc.subjectElectric Current Controlen_US
dc.subjectElectric Inductorsen_US
dc.subjectElectric Network Topologyen_US
dc.subjectSensorsen_US
dc.subjectSpurious Signal Noiseen_US
dc.titleOn the use of current sensors for control of power convertersen_HK
dc.typeConference_Paperen_HK
dc.identifier.emailHui, SYR:ronhui@eee.hku.hken_HK
dc.identifier.authorityHui, SYR=rp01510en_HK
dc.description.naturelink_to_subscribed_fulltexten_US
dc.identifier.scopuseid_2-s2.0-0034794918en_HK
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-0034794918&selection=ref&src=s&origin=recordpageen_HK
dc.identifier.volume1en_HK
dc.identifier.spage302en_HK
dc.identifier.epage307en_HK
dc.publisher.placeUnited Statesen_HK
dc.identifier.scopusauthoridQiu, DY=7102135497en_HK
dc.identifier.scopusauthoridYip, SC=7102134301en_HK
dc.identifier.scopusauthoridChung, HSH=7404007467en_HK
dc.identifier.scopusauthoridHui, SYR=7202831744en_HK
dc.identifier.issnl0275-9306-

Export via OAI-PMH Interface in XML Formats

OR

Export to Other Non-XML Formats