File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Conference Paper: Preliminary study on the dynamic stability of TiO2-water based nanofluids flow in circular tube

TitlePreliminary study on the dynamic stability of TiO2-water based nanofluids flow in circular tube
Authors
KeywordsCentrifugal sedimentation weight
Dynamic stability
Nanofluids
TiO2-water
Issue Date2010
PublisherAmerican Society of Mechanical Engineers.
Citation
The ASME 2nd International Conference on Micro/Nanoscale Heat and Mass Transfer (MNHMT2009), Shanghai, China, 18-21 December 2009. In Proceedings of ASME-MNHMT2009, 2010, v. 1, p. 515-523 How to Cite?
AbstractThe preparation of nanofluids with good suspending stability is an important premise for further scientific research and engineering application. However, previous studies mainly focused on the stability of nanofluids in static situation without any flow, and seldom discussed the suspending stability of nanofluids in flow. The objective of this study is to investigate the suspending stability of nanofluids in flow using TiO2-water nanofluids flowing through a circular tube as an example. The study uses the centrifugal sedimentation weight of supernatant suspending solution to characterize the stability of nanofluids. The bigger centrifugal sedimentation weight represents the better stability. This study also characterization of particle size distribution of nanofluids by Malvern laser particle size analyzer. In the present experiment conditions, TiO2-water nanofluids with the mass fraction of 0.5 % are driven by a peristaltic pump and flows through a circular tube with 4.8 mm inner diameter. In the present experimental conditions, the volume flow rate of TiO2-water nanofluids is slightly lower than that of pure water. The size distribution of nanoparticle in fluid after circulating flow 2 hours behaves more uniformly than that in a fluid after maintaining static situation 2 hours. with the increasing of Reynolds number of fluid in circulating flow, the suspending stability of nanofluids in circulating flow is significantly higher that that in static situation. When the Reynolds number is up to 2000, the suspending status of nanoparticles in the base fluid is nearly the same as the initial status of sample before circulating. Despite its preliminary, this work demonstrates that the flow pattern is one of influence factors on the suspending stability of nanofluids, which should not be ignored in the study of the suspending stability and heat transfer performance of nanofluids. This study may give some inspiration for further research on relative fields such as the preparation of nanofluids for heat transfer enhancement and so on. © 2009 by ASME.
DescriptionTrack 2 Nanofluids - Session: 2.2 Production and Characterization of Nanofluids: MNHMT2009-18282
Persistent Identifierhttp://hdl.handle.net/10722/126280
References

 

DC FieldValueLanguage
dc.contributor.authorYang, Jen_HK
dc.contributor.authorJiang, Oen_HK
dc.contributor.authorDi, Oen_HK
dc.contributor.authorWang, Len_HK
dc.date.accessioned2010-10-31T12:19:46Z-
dc.date.available2010-10-31T12:19:46Z-
dc.date.issued2010en_HK
dc.identifier.citationThe ASME 2nd International Conference on Micro/Nanoscale Heat and Mass Transfer (MNHMT2009), Shanghai, China, 18-21 December 2009. In Proceedings of ASME-MNHMT2009, 2010, v. 1, p. 515-523en_HK
dc.identifier.urihttp://hdl.handle.net/10722/126280-
dc.descriptionTrack 2 Nanofluids - Session: 2.2 Production and Characterization of Nanofluids: MNHMT2009-18282-
dc.description.abstractThe preparation of nanofluids with good suspending stability is an important premise for further scientific research and engineering application. However, previous studies mainly focused on the stability of nanofluids in static situation without any flow, and seldom discussed the suspending stability of nanofluids in flow. The objective of this study is to investigate the suspending stability of nanofluids in flow using TiO2-water nanofluids flowing through a circular tube as an example. The study uses the centrifugal sedimentation weight of supernatant suspending solution to characterize the stability of nanofluids. The bigger centrifugal sedimentation weight represents the better stability. This study also characterization of particle size distribution of nanofluids by Malvern laser particle size analyzer. In the present experiment conditions, TiO2-water nanofluids with the mass fraction of 0.5 % are driven by a peristaltic pump and flows through a circular tube with 4.8 mm inner diameter. In the present experimental conditions, the volume flow rate of TiO2-water nanofluids is slightly lower than that of pure water. The size distribution of nanoparticle in fluid after circulating flow 2 hours behaves more uniformly than that in a fluid after maintaining static situation 2 hours. with the increasing of Reynolds number of fluid in circulating flow, the suspending stability of nanofluids in circulating flow is significantly higher that that in static situation. When the Reynolds number is up to 2000, the suspending status of nanoparticles in the base fluid is nearly the same as the initial status of sample before circulating. Despite its preliminary, this work demonstrates that the flow pattern is one of influence factors on the suspending stability of nanofluids, which should not be ignored in the study of the suspending stability and heat transfer performance of nanofluids. This study may give some inspiration for further research on relative fields such as the preparation of nanofluids for heat transfer enhancement and so on. © 2009 by ASME.en_HK
dc.languageengen_HK
dc.publisherAmerican Society of Mechanical Engineers.-
dc.relation.ispartofProceedings of the ASME Micro/Nanoscale Heat and Mass Transfer International Conference 2009en_HK
dc.subjectCentrifugal sedimentation weighten_HK
dc.subjectDynamic stabilityen_HK
dc.subjectNanofluidsen_HK
dc.subjectTiO2-wateren_HK
dc.titlePreliminary study on the dynamic stability of TiO2-water based nanofluids flow in circular tubeen_HK
dc.typeConference_Paperen_HK
dc.identifier.emailWang, L:lqwang@hkucc.hku.hken_HK
dc.identifier.authorityWang, L=rp00184en_HK
dc.description.naturelink_to_subscribed_fulltext-
dc.identifier.scopuseid_2-s2.0-77954322161en_HK
dc.identifier.hkuros174487en_HK
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-77954322161&selection=ref&src=s&origin=recordpageen_HK
dc.identifier.volume1en_HK
dc.identifier.spage515en_HK
dc.identifier.epage523en_HK
dc.description.otherThe ASME 2nd International Conference on Micro/Nanoscale Heat and Mass Transfer (MNHMT2009), Shanghai, China, 18-21 December 2009. In Proceedings of ASME-MNHMT2009, 2010, v. 1, p. 515-523-
dc.identifier.scopusauthoridYang, J=8353545200en_HK
dc.identifier.scopusauthoridJiang, O=36182348000en_HK
dc.identifier.scopusauthoridDi, O=36182325000en_HK
dc.identifier.scopusauthoridWang, L=35235288500en_HK

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats