File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Grain boundary precipitation in an Fe28.6Mn9.8Al0.8Si1.0C alloy

TitleGrain boundary precipitation in an Fe28.6Mn9.8Al0.8Si1.0C alloy
Authors
Chao, C. Y.Liu, T. F.
Issue Date1991
Citation
Scripta Metallurgica et Materiala, 1991, v. 25, n. 7, p. 1623-1628 How to Cite?
DOI: http://dx.doi.org/10.1016/0956-716X(91)90464-C
AbstractIn the as-quenched condition, the microstructure of the Fe28.6Mn9.8Al0.8Si1.0C alloy is a single austenite phase. When the as-quenched alloy was aged at 600°C for short times, fine K-phase carbides were observed to precipitate only within the austenite matrix. However, with prolonged aging at 600°C, coarse K-phase carbides began to appear on the γ/γ grain boundaries and twin boundaries. Subsequently, the coarse K-phase carbides grew into the adjacent austenite grains through a γ→(DO3+ K-phase) transition. © 1991.
Persistent Identifierhttp://hdl.handle.net/10722/255821
ISSN
0956-716X
ISI Accession Number ID
WOS:A1991FU81400025

 

DC FieldValueLanguage
dc.contributor.authorChao, C. Y.-
dc.contributor.authorLiu, T. F.-
dc.date.accessioned2018-07-16T06:13:46Z-
dc.date.available2018-07-16T06:13:46Z-
dc.date.issued1991-
dc.identifier.citationScripta Metallurgica et Materiala, 1991, v. 25, n. 7, p. 1623-1628-
dc.identifier.issn0956-716X-
dc.identifier.urihttp://hdl.handle.net/10722/255821-
dc.description.abstractIn the as-quenched condition, the microstructure of the Fe28.6Mn9.8Al0.8Si1.0C alloy is a single austenite phase. When the as-quenched alloy was aged at 600°C for short times, fine K-phase carbides were observed to precipitate only within the austenite matrix. However, with prolonged aging at 600°C, coarse K-phase carbides began to appear on the γ/γ grain boundaries and twin boundaries. Subsequently, the coarse K-phase carbides grew into the adjacent austenite grains through a γ→(DO3+ K-phase) transition. © 1991.-
dc.languageeng-
dc.relation.ispartofScripta Metallurgica et Materiala-
dc.titleGrain boundary precipitation in an Fe28.6Mn9.8Al0.8Si1.0C alloy-
dc.typeArticle-
dc.description.naturelink_to_subscribed_fulltext-
dc.identifier.doi10.1016/0956-716X(91)90464-C-
dc.identifier.scopuseid_2-s2.0-0026187351-
dc.identifier.volume25-
dc.identifier.issue7-
dc.identifier.spage1623-
dc.identifier.epage1628-
dc.identifier.isiWOS:A1991FU81400025-
dc.identifier.issnl0956-716X-

Export via OAI-PMH Interface in XML Formats

OR

Export to Other Non-XML Formats