File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Conference Paper: A reflected laser line approach for industrial robot calibration

TitleA reflected laser line approach for industrial robot calibration
Authors
Issue Date2012
Citation
IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM, 2012, p. 610-615 How to Cite?
AbstractThis paper proposes a novel calibration approach for industrial robots. Unlike previous methods, the proposed approach introduces a completely new technique for automatically calibrating robots. The proposed system consists of an industrial robot manipulator, a laser fixture attached to the robot tool center point (TCP), a PC-based interface, and a new portable position sensitive device. This portable device comprised of two fixed position sensitive detectors (PSD's) tilted in an angle to reflect the laser line from one PSD to another. The new calibration approach is not only able to compute the joint offset parameters of the robot, but is also capable of simultaneously calibrating the robot's workpiece relationship. It was also designed to be faster yet simpler than other methods. Throughout this paper we present, analyze and compare both simulations and experimental results between the new proposed approach and our existing methods. © 2012 IEEE.
Persistent Identifierhttp://hdl.handle.net/10722/213264

 

DC FieldValueLanguage
dc.contributor.authorNieves, Erick-
dc.contributor.authorXi, Ning-
dc.contributor.authorDu, Biqiang-
dc.contributor.authorJia, Yunyi-
dc.date.accessioned2015-07-28T04:06:42Z-
dc.date.available2015-07-28T04:06:42Z-
dc.date.issued2012-
dc.identifier.citationIEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM, 2012, p. 610-615-
dc.identifier.urihttp://hdl.handle.net/10722/213264-
dc.description.abstractThis paper proposes a novel calibration approach for industrial robots. Unlike previous methods, the proposed approach introduces a completely new technique for automatically calibrating robots. The proposed system consists of an industrial robot manipulator, a laser fixture attached to the robot tool center point (TCP), a PC-based interface, and a new portable position sensitive device. This portable device comprised of two fixed position sensitive detectors (PSD's) tilted in an angle to reflect the laser line from one PSD to another. The new calibration approach is not only able to compute the joint offset parameters of the robot, but is also capable of simultaneously calibrating the robot's workpiece relationship. It was also designed to be faster yet simpler than other methods. Throughout this paper we present, analyze and compare both simulations and experimental results between the new proposed approach and our existing methods. © 2012 IEEE.-
dc.languageeng-
dc.relation.ispartofIEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM-
dc.titleA reflected laser line approach for industrial robot calibration-
dc.typeConference_Paper-
dc.description.natureLink_to_subscribed_fulltext-
dc.identifier.doi10.1109/AIM.2012.6266035-
dc.identifier.scopuseid_2-s2.0-84866896540-
dc.identifier.spage610-
dc.identifier.epage615-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats